include/configs/sama5d3xek.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuation settings for the SAMA5D3xEK board.
   4  *
   5  * Copyright (C) 2012 - 2013 Atmel
   6  *
   7  * based on at91sam9m10g45ek.h by:
   8  * Stelian Pop <stelian@popies.net>
   9  * Lead Tech Design <www.leadtechdesign.com>
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include "at91-sama5_common.h"
  16
  17 /*
  18  * This needs to be defined for the OHCI code to work but it is defined as
  19  * ATMEL_ID_UHPHS in the CPU specific header files.
  20  */
  21 #define ATMEL_ID_UHP                    32
  22
  23 /*
  24  * Specify the clock enable bit in the PMC_SCER register.
  25  */
  26 #define ATMEL_PMC_UHP                   (1 <<  6)
  27
  28 /* board specific (not enough SRAM) */
  29 #define CONFIG_SAMA5D3_LCD_BASE         0x23E00000
  30
  31 /* NOR flash */
  32 #ifdef CONFIG_MTD_NOR_FLASH
  33 #define CONFIG_SYS_FLASH_BASE           0x10000000
  34 #define CONFIG_SYS_MAX_FLASH_SECT       131
  35 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  36 #endif
  37
  38 /* SDRAM */
  39 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  40 #define CONFIG_SYS_SDRAM_SIZE           0x20000000
  41
  42 #ifdef CONFIG_SPL_BUILD
  43 #define CONFIG_SYS_INIT_SP_ADDR         0x318000
  44 #else
  45 #define CONFIG_SYS_INIT_SP_ADDR \
  46         (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
  47 #endif
  48
  49 /* SerialFlash */
  50
  51 #ifdef CONFIG_CMD_SF
  52 #define CONFIG_SF_DEFAULT_SPEED         30000000
  53 #endif
  54
  55 /* NAND flash */
  56 #ifdef CONFIG_CMD_NAND
  57 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  58 #define CONFIG_SYS_NAND_BASE            0x60000000
  59 /* our ALE is AD21 */
  60 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
  61 /* our CLE is AD22 */
  62 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
  63 #define CONFIG_SYS_NAND_ONFI_DETECTION
  64 #endif
  65 /* PMECC & PMERRLOC */
  66 #define CONFIG_ATMEL_NAND_HWECC
  67 #define CONFIG_ATMEL_NAND_HW_PMECC
  68 #define CONFIG_PMECC_CAP                4
  69 #define CONFIG_PMECC_SECTOR_SIZE        512
  70
  71 /* USB */
  72
  73 #ifdef CONFIG_CMD_USB
  74 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
  75 #define CONFIG_USB_OHCI_NEW
  76 #define CONFIG_SYS_USB_OHCI_CPU_INIT
  77 #define CONFIG_SYS_USB_OHCI_REGS_BASE           ATMEL_BASE_OHCI
  78 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "sama5d3"
  79 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      3
  80 #endif
  81
  82 #define CONFIG_SYS_LOAD_ADDR                    0x22000000 /* load address */
  83
  84 /* SPL */
  85 #define CONFIG_SPL_TEXT_BASE            0x300000
  86 #define CONFIG_SPL_MAX_SIZE             0x18000
  87 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
  88 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  89 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
  90 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
  91
  92 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
  93
  94 #ifdef CONFIG_SD_BOOT
  95 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
  96 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
  97
  98 #elif CONFIG_SPI_BOOT
  99 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x10000
 100
 101 #elif CONFIG_NAND_BOOT
 102 #define CONFIG_SPL_NAND_DRIVERS
 103 #define CONFIG_SPL_NAND_BASE
 104 #endif
 105 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 106 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 107 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
 108 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 109 #define CONFIG_SYS_NAND_OOBSIZE         64
 110 #define CONFIG_SYS_NAND_BLOCK_SIZE      0x20000
 111 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
 112 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 113
 114 #endif