1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Configuration file for the SAMA5D2 ICP Board.
5 * Copyright (C) 2018 Microchip Corporation
6 * Eugen Hristev <eugen.hristev@microchip.com>
12 #include "at91-sama5_common.h"
14 #undef CONFIG_SYS_AT91_MAIN_CLOCK
15 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
17 #define CONFIG_MISC_INIT_R
20 #define CONFIG_SYS_SDRAM_BASE 0x20000000
21 #define CONFIG_SYS_SDRAM_SIZE 0x20000000
23 #ifdef CONFIG_SPL_BUILD
24 #define CONFIG_SYS_INIT_SP_ADDR 0x218000
26 #define CONFIG_SYS_INIT_SP_ADDR \
27 (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
30 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
33 #undef CONFIG_CMD_NAND
36 #define CONFIG_SF_DEFAULT_SPEED 66000000
38 #undef CONFIG_BOOTCOMMAND
40 /* u-boot env in sd/mmc card */
41 #define FAT_ENV_INTERFACE "mmc"
42 #define FAT_ENV_DEVICE_AND_PART "0"
43 #define FAT_ENV_FILE "uboot.env"
44 #define CONFIG_ENV_SIZE 0x4000
45 /* bootstrap + u-boot + env in sd card */
46 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d2_icp.dtb; " \
47 "fatload mmc 0:1 0x22000000 zImage; " \
48 "bootz 0x22000000 - 0x21000000"
49 #undef CONFIG_BOOTARGS
50 #define CONFIG_BOOTARGS \
51 "console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
55 #define CONFIG_SPL_MAX_SIZE 0x10000
56 #define CONFIG_SPL_BSS_START_ADDR 0x20000000
57 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
58 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000
59 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
61 #define CONFIG_SYS_MONITOR_LEN (512 << 10)
64 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
65 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"