2 * Copyright (C) 2010 Samsung Electronics
3 * Minkyu Kang <mk7.kang@samsung.com>
5 * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
7 * SPDX-License-Identifier: GPL-2.0+
10 #ifndef __CONFIG_UNIVERSAL_H
11 #define __CONFIG_UNIVERSAL_H
13 #include <configs/exynos4-dt.h>
15 #define CONFIG_SYS_PROMPT "Universal # " /* Monitor Command Prompt */
17 #undef CONFIG_DEFAULT_DEVICE_TREE
18 #define CONFIG_DEFAULT_DEVICE_TREE exynos4210-universal_c210
20 #define CONFIG_TIZEN /* TIZEN lib */
22 /* Keep L2 Cache Disabled */
23 #define CONFIG_SYS_L2CACHE_OFF 1
25 /* Universal has 2 banks of DRAM */
26 #define CONFIG_NR_DRAM_BANKS 2
27 #define CONFIG_SYS_SDRAM_BASE 0x40000000
28 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
30 #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
32 /* Size of malloc() pool */
33 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))
35 /* select serial console configuration */
36 #define CONFIG_SERIAL2
37 #define CONFIG_BAUDRATE 115200
39 /* Console configuration */
40 #define CONFIG_SYS_CONSOLE_INFO_QUIET
41 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
43 #define CONFIG_BOOTARGS "Please use defined boot"
44 #define CONFIG_BOOTCOMMAND "run mmcboot"
45 #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
47 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
48 - GENERATED_GBL_DATA_SIZE)
50 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
52 #define CONFIG_SYS_MONITOR_BASE 0x00000000
54 /* memtest works on */
55 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
56 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
57 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
59 #define CONFIG_SYS_TEXT_BASE 0x44800000
61 #define CONFIG_MTD_DEVICE
62 #define CONFIG_MTD_PARTITIONS
64 /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
65 #define MTDIDS_DEFAULT "onenand0=samsung-onenand"
67 #define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:"\
79 #define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
81 #define MBRPARTS_DEFAULT "20M(permanent)"\
87 #define CONFIG_ENV_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
88 #define CONFIG_BOOTBLOCK "10"
89 #define CONFIG_UBIBLOCK "9"
91 #define CONFIG_ENV_IS_IN_MMC
92 #define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
93 #define CONFIG_ENV_SIZE 4096
94 #define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
96 #define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc "
97 #define CONFIG_ENV_FLASHBOOT CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
100 #define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"
102 #define CONFIG_ENV_VARS_UBOOT_CONFIG
103 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
105 #define CONFIG_EXTRA_ENV_SETTINGS \
107 "onenand erase 0x0 0x100000;" \
108 "onenand write 0x42008000 0x0 0x100000\0" \
110 "onenand erase 0xc00000 0x500000;" \
111 "onenand write 0x41008000 0xc00000 0x500000\0" \
113 "run loaduimage; bootm 0x40007FC0\0" \
115 "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
116 "mmc boot 0 1 1 0\0" \
118 "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
119 "mmc boot 0 1 1 0\0" \
121 "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
122 "lpj=lpj=3981312\0" \
124 "set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
125 CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
126 CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
128 "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
129 CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
130 CONFIG_ENV_COMMON_BOOT \
131 "; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
133 "set bootargs root=/dev/nfs rw " \
134 "nfsroot=${nfsroot},nolock,tcp " \
135 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
136 "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
139 "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
140 "${console} ${meminfo} " \
141 "initrd=0x43000000,8M ramdisk=8192\0" \
143 "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
144 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
145 "run loaduimage; bootm 0x40007FC0\0" \
146 "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
147 "boottrace=setenv opts initcall_debug; run bootcmd\0" \
148 "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
150 "rootfstype=ext4\0" \
151 "console=" CONFIG_DEFAULT_CONSOLE \
152 "mtdparts=" MTDPARTS_DEFAULT \
153 "mbrparts=" MBRPARTS_DEFAULT \
154 "meminfo=crashkernel=32M@0x50000000\0" \
155 "nfsroot=/nfsroot/arm\0" \
156 "bootblock=" CONFIG_BOOTBLOCK "\0" \
157 "ubiblock=" CONFIG_UBIBLOCK" \0" \
159 "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
163 "opts=always_resume=1"
165 #define CONFIG_USE_ONENAND_BOARD_INIT
166 #define CONFIG_SAMSUNG_ONENAND
167 #define CONFIG_SYS_ONENAND_BASE 0x0C000000
169 #include <asm/arch/gpio.h>
173 #define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7)
174 #define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6)
176 #define CONFIG_CMD_I2C
178 #define CONFIG_SYS_I2C
179 #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
180 #define CONFIG_SYS_I2C_SOFT_SPEED 50000
181 #define CONFIG_SYS_I2C_SOFT_SLAVE 0
182 #define CONFIG_SOFT_I2C_READ_REPEATED_START
183 #define CONFIG_I2C_MULTI_BUS
184 #define CONFIG_SYS_MAX_I2C_BUS 7
187 #define CONFIG_POWER_I2C
188 #define CONFIG_POWER_MAX8998
190 #define CONFIG_USB_GADGET
191 #define CONFIG_USB_GADGET_S3C_UDC_OTG
192 #define CONFIG_USB_GADGET_DUALSPEED
197 #define CONFIG_SOFT_SPI
198 #define CONFIG_SOFT_SPI_MODE SPI_MODE_3
199 #define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1)
200 #define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3)
201 #define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0)
202 #define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3)
204 #define SPI_DELAY udelay(1)
206 #define SPI_SCL(bit) universal_spi_scl(bit)
207 #define SPI_SDA(bit) universal_spi_sda(bit)
208 #define SPI_READ universal_spi_read()
210 void universal_spi_scl(int bit);
211 void universal_spi_sda(int bit);
212 int universal_spi_read(void);
215 /* Common misc for Samsung */
216 #define CONFIG_MISC_COMMON
218 #define CONFIG_MISC_INIT_R
220 /* Download menu - Samsung common */
221 #define CONFIG_LCD_MENU
222 #define CONFIG_LCD_MENU_BOARD
224 /* Download menu - definitions for check keys */
226 #include <power/max8998_pmic.h>
228 #define KEY_PWR_PMIC_NAME "MAX8998_PMIC"
229 #define KEY_PWR_STATUS_REG MAX8998_REG_STATUS1
230 #define KEY_PWR_STATUS_MASK (1 << 7)
231 #define KEY_PWR_INTERRUPT_REG MAX8998_REG_IRQ1
232 #define KEY_PWR_INTERRUPT_MASK (1 << 7)
234 #define KEY_VOL_UP_GPIO exynos4_gpio_get(2, x2, 0)
235 #define KEY_VOL_DOWN_GPIO exynos4_gpio_get(2, x2, 1)
236 #endif /* __ASSEMBLY__ */
239 #define LCD_BPP LCD_COLOR16
240 #define CONFIG_SYS_WHITE_ON_BLACK
245 #define CONFIG_EXYNOS_FB
247 #define CONFIG_CMD_BMP
248 #define CONFIG_BMP_16BPP
249 #define CONFIG_LD9040
250 #define CONFIG_VIDEO_BMP_GZIP
251 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
256 #endif /* __CONFIG_H */