include/configs/s5pc210_universal.h

   1 /*
   2  * Copyright (C) 2010 Samsung Electronics
   3  * Minkyu Kang <mk7.kang@samsung.com>
   4  *
   5  * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_UNIVERSAL_H
  11 #define __CONFIG_UNIVERSAL_H
  12
  13 #include <configs/exynos4-common.h>
  14
  15 #define CONFIG_TIZEN                    /* TIZEN lib */
  16
  17 /* Keep L2 Cache Disabled */
  18 #define CONFIG_SYS_L2CACHE_OFF          1
  19
  20 /* Universal has 2 banks of DRAM */
  21 #define CONFIG_NR_DRAM_BANKS            2
  22 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  23 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  24
  25 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  26
  27 /* select serial console configuration */
  28 #define CONFIG_SERIAL2
  29
  30 /* Console configuration */
  31
  32 #define CONFIG_BOOTCOMMAND              "run mmcboot"
  33 #define CONFIG_DEFAULT_CONSOLE          "console=ttySAC1,115200n8\0"
  34
  35 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  36                                         - GENERATED_GBL_DATA_SIZE)
  37
  38 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  39
  40 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  41
  42 /* memtest works on */
  43 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  44 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5000000)
  45 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x4800000)
  46
  47 #define CONFIG_SYS_TEXT_BASE            0x44800000
  48
  49 #define CONFIG_MTD_DEVICE
  50 #define CONFIG_MTD_PARTITIONS
  51
  52 /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
  53 #define MTDIDS_DEFAULT          "onenand0=samsung-onenand"
  54
  55 #define MTDPARTS_DEFAULT        "mtdparts=samsung-onenand:"\
  56                                 "128k(s-boot)"\
  57                                 ",896k(bootloader)"\
  58                                 ",256k(params)"\
  59                                 ",2816k(config)"\
  60                                 ",8m(csa)"\
  61                                 ",7m(kernel)"\
  62                                 ",1m(log)"\
  63                                 ",12m(modem)"\
  64                                 ",60m(qboot)"\
  65                                 ",-(UBI)\0"
  66
  67 #define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
  68
  69 #define MBRPARTS_DEFAULT        "20M(permanent)"\
  70                                 ",20M(boot)"\
  71                                 ",1G(system)"\
  72                                 ",100M(swap)"\
  73                                 ",-(UMS)\0"
  74
  75 #define CONFIG_ENV_UBI_MTD      " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
  76 #define CONFIG_BOOTBLOCK        "10"
  77 #define CONFIG_UBIBLOCK         "9"
  78
  79 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
  80 #define CONFIG_ENV_SIZE                 4096
  81 #define CONFIG_ENV_OFFSET               ((32 - 4) << 10) /* 32KiB - 4KiB */
  82
  83 #define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc "
  84 #define CONFIG_ENV_FLASHBOOT    CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
  85                                 "${mtdparts}"
  86
  87 #define CONFIG_ENV_COMMON_BOOT  "${console} ${meminfo}"
  88
  89 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  90 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  91
  92 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  93         "updateb=" \
  94                 "onenand erase 0x0 0x100000;" \
  95                 "onenand write 0x42008000 0x0 0x100000\0" \
  96         "updatek=" \
  97                 "onenand erase 0xc00000 0x500000;" \
  98                 "onenand write 0x41008000 0xc00000 0x500000\0" \
  99         "bootk=" \
 100                 "run loaduimage; bootm 0x40007FC0\0" \
 101         "updatebackup=" \
 102                 "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
 103                 "mmc dev 0 0\0" \
 104         "updatebootb=" \
 105                 "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
 106         "lpj=lpj=3981312\0" \
 107         "ubifsboot=" \
 108                 "set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
 109                 CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
 110                 CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
 111         "tftpboot=" \
 112                 "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
 113                 CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
 114                 CONFIG_ENV_COMMON_BOOT \
 115                 "; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
 116         "nfsboot=" \
 117                 "set bootargs root=/dev/nfs rw " \
 118                 "nfsroot=${nfsroot},nolock,tcp " \
 119                 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
 120                 "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
 121                 "; run bootk\0" \
 122         "ramfsboot=" \
 123                 "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
 124                 "${console} ${meminfo} " \
 125                 "initrd=0x43000000,8M ramdisk=8192\0" \
 126         "mmcboot=" \
 127                 "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 128                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
 129                 "run loaduimage; bootm 0x40007FC0\0" \
 130         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
 131         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
 132         "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
 133         "verify=n\0" \
 134         "rootfstype=ext4\0" \
 135         "console=" CONFIG_DEFAULT_CONSOLE \
 136         "mtdparts=" MTDPARTS_DEFAULT \
 137         "mbrparts=" MBRPARTS_DEFAULT \
 138         "meminfo=crashkernel=32M@0x50000000\0" \
 139         "nfsroot=/nfsroot/arm\0" \
 140         "bootblock=" CONFIG_BOOTBLOCK "\0" \
 141         "ubiblock=" CONFIG_UBIBLOCK" \0" \
 142         "ubi=enabled\0" \
 143         "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
 144         "mmcdev=0\0" \
 145         "mmcbootpart=2\0" \
 146         "mmcrootpart=3\0" \
 147         "opts=always_resume=1"
 148
 149 #define CONFIG_USE_ONENAND_BOARD_INIT
 150 #define CONFIG_SAMSUNG_ONENAND
 151 #define CONFIG_SYS_ONENAND_BASE         0x0C000000
 152
 153 #define CONFIG_USB_GADGET_DWC2_OTG_PHY
 154
 155 /*
 156  * SPI Settings
 157  */
 158 #define CONFIG_SOFT_SPI
 159
 160 #ifndef __ASSEMBLY__
 161 void universal_spi_scl(int bit);
 162 void universal_spi_sda(int bit);
 163 int universal_spi_read(void);
 164 #endif
 165
 166 /* Common misc for Samsung */
 167 #define CONFIG_MISC_COMMON
 168
 169 #define CONFIG_MISC_INIT_R
 170
 171 /* Download menu - Samsung common */
 172 #define CONFIG_LCD_MENU
 173 #define CONFIG_LCD_MENU_BOARD
 174
 175 /* Download menu - definitions for check keys */
 176 #ifndef __ASSEMBLY__
 177
 178 #define KEY_PWR_PMIC_NAME               "MAX8998_PMIC"
 179 #define KEY_PWR_STATUS_REG              MAX8998_REG_STATUS1
 180 #define KEY_PWR_STATUS_MASK             (1 << 7)
 181 #define KEY_PWR_INTERRUPT_REG           MAX8998_REG_IRQ1
 182 #define KEY_PWR_INTERRUPT_MASK          (1 << 7)
 183
 184 #define KEY_VOL_UP_GPIO                 EXYNOS4_GPIO_X20
 185 #define KEY_VOL_DOWN_GPIO               EXYNOS4_GPIO_X21
 186 #endif /* __ASSEMBLY__ */
 187
 188 /* LCD console */
 189 #define LCD_BPP                 LCD_COLOR16
 190
 191 /*
 192  * LCD Settings
 193  */
 194 #define CONFIG_BMP_16BPP
 195 #define CONFIG_LD9040
 196 #define CONFIG_VIDEO_BMP_GZIP
 197 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
 198
 199 #endif  /* __CONFIG_H */