1 /* SPDX-License-Identifier: GPL-2.0+
3 * Copyright (C) Guangzhou FriendlyARM Computer Tech. Co., Ltd.
4 * (http://www.friendlyarm.com)
6 * (C) Copyright 2016 Nexell
7 * Hyejung Kwon <cjscld15@nexell.co.kr>
9 * Copyright (C) 2019 Stefan Bosch <stefan_b@posteo.net>
15 #include <linux/sizes.h>
16 #include <asm/arch/nexell.h>
18 /*-----------------------------------------------------------------------
19 * System memory Configuration
21 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
22 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
23 #define CONFIG_SYS_MEM_SIZE 0x40000000
24 #define CONFIG_SYS_SDRAM_BASE 0x71000000
27 * "(CONFIG_SYS_MEM_SIZE - CONFIG_SYS_RESERVE_MEM_SIZE)" has been used in
28 * u-boot nanopi2-v2016.01.
29 * This is not working anymore because boot_fdt_add_mem_rsv_regions() in
30 * common/image-fdt.c has been extended:
31 * Also reserved-memory sections are marked as unusable.
33 * In friendlyArm Ubuntu 16.04 source arch/arm/boot/dts/s5p4418.dtsi:
35 * #address-cells = <1>;
39 * secure_memory@b0000000 {
40 * reg = <0xB0000000 0x1000000>;
45 * arch_lmb_reserve() of arch/arm/lib/bootm.c:
46 * "Allocate space for command line and board info - ... below the current
48 * --> Memory allocated would overlap with "secure_memory@b0000000"
49 * --> lmb_add_region(rgn, base==0xb0000000, size==0x1000000) fails,
52 * Kernel image @ 0x71080000 [ 0x000000 - 0x60e628 ]
53 * ## Flattened Device Tree blob at 7a000000
54 * Booting using the fdt blob at 0x7a000000
55 * ERROR: reserving fdt memory region failed (addr=b0000000 size=1000000)
56 * Using Device Tree in place at 7a000000, end 7a00fbf0
61 #define CONFIG_SYS_SDRAM_SIZE (0xb0000000 - CONFIG_SYS_SDRAM_BASE)
63 #define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
65 #define BMP_LOAD_ADDR 0x78000000
67 /* kernel load address */
68 #define CONFIG_SYS_LOAD_ADDR 0x71080000
69 #define INITRD_START 0x79000000
70 #define KERNEL_DTB_ADDR 0x7A000000
72 /*-----------------------------------------------------------------------
73 * High Level System Configuration
75 /* Not used: not need IRQ/FIQ stuff */
77 /* decrementer freq: 1ms ticks */
78 #define CONFIG_SYS_HZ 1000
80 /*-----------------------------------------------------------------------
81 * System initialize options (board_init_f)
83 /* board_init_f->init_sequence, call arch_cpu_init */
84 #define CONFIG_ARCH_CPU_INIT
86 /*-----------------------------------------------------------------------
87 * Miscellaneous configurable options
89 #ifdef CONFIG_SYS_PROMPT
90 #undef CONFIG_SYS_PROMPT
91 /* Monitor Command Prompt */
92 #define CONFIG_SYS_PROMPT "nanopi2# "
95 /* Console I/O Buffer Size */
96 #define CONFIG_SYS_CBSIZE 1024
97 /* Print Buffer Size */
98 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
99 sizeof(CONFIG_SYS_PROMPT) + 16)
100 /* max number of command args */
101 #define CONFIG_SYS_MAXARGS 16
102 /* Boot Argument Buffer Size */
103 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
105 #ifdef CONFIG_HUSH_PARSER
106 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
109 /*-----------------------------------------------------------------------
110 * Etc Command definition
112 #undef CONFIG_BOOTM_NETBSD
113 #undef CONFIG_BOOTM_RTEMS
115 /*-----------------------------------------------------------------------
116 * serial console configuration
118 #define CONFIG_PL011_CLOCK 50000000
119 #define CONFIG_PL01x_PORTS {(void *)PHY_BASEADDR_UART0, \
120 (void *)PHY_BASEADDR_UART1, \
121 (void *)PHY_BASEADDR_UART2, \
122 (void *)PHY_BASEADDR_UART3}
123 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
125 /*-----------------------------------------------------------------------
128 #define CONFIG_SYS_PLLFIN 24000000UL
130 /*-----------------------------------------------------------------------
133 #define CONFIG_TIMER_SYS_TICK_CH 0
135 /*-----------------------------------------------------------------------
138 #ifndef CONFIG_S5P4418_ONEWIRE
140 /* fallback to pwm */
141 #define BACKLIGHT_CH 0
142 #define BACKLIGHT_DIV 0
143 #define BACKLIGHT_INV 0
144 #define BACKLIGHT_DUTY 50
145 #define BACKLIGHT_HZ 1000
149 /*-----------------------------------------------------------------------
153 #define CONFIG_VIDEO_LOGO
155 #ifdef CONFIG_VIDEO_LOGO
156 #ifdef CONFIG_SPLASH_SCREEN
157 #define SPLASH_FILE logo.bmp
162 /*-----------------------------------------------------------------------
165 #define BLOADER_MMC \
166 "ext4load mmc ${rootdev}:${bootpart} "
168 #ifdef CONFIG_OF_BOARD_SETUP
169 #define EXTRA_ENV_DTB_RESERVE \
171 "if test -n \"$dtb_addr\"; then fdt addr $dtb_addr; fi\0"
173 #define EXTRA_ENV_DTB_RESERVE \
175 "if test -n \"$fb_addr\"; then " \
176 "fdt addr $dtb_addr;" \
178 "fdt mk /reserved-memory display_reserved;" \
179 "fdt set /reserved-memory/display_reserved " \
180 "reg <$fb_addr 0x800000>;" \
184 #ifdef CONFIG_SPLASH_SCREEN
185 #define EXTRA_ENV_BOOT_LOGO \
186 "splashimage=" __stringify(BMP_LOAD_ADDR)"\0" \
187 "splashfile=" __stringify(SPLASH_FILE)"\0" \
190 EXTRA_ENV_DTB_RESERVE
192 #define EXTRA_ENV_BOOT_LOGO EXTRA_ENV_DTB_RESERVE
195 #define CONFIG_EXTRA_ENV_SETTINGS \
196 "fdt_high=0xffffffff\0" \
197 "initrd_high=0xffffffff\0" \
198 "rootdev=" __stringify(CONFIG_ROOT_DEV) "\0" \
199 "rootpart=" __stringify(CONFIG_ROOT_PART) "\0" \
200 "bootpart=" __stringify(CONFIG_BOOT_PART) "\0" \
202 "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
203 "dtb_name=s5p4418-nanopi2-rev01.dtb\0" \
204 "dtb_addr=" __stringify(KERNEL_DTB_ADDR) "\0" \
205 "initrd_name=ramdisk.img\0" \
206 "initrd_addr=" __stringify(INITRD_START) "\0" \
207 "initrd_size=0x600000\0" \
209 BLOADER_MMC "${dtb_addr} ${dtb_name}; " \
210 "run dtb_reserve\0" \
212 BLOADER_MMC "${loadaddr} ${kernel}\0" \
214 BLOADER_MMC "${initrd_addr} ${initrd_name}; " \
215 "setenv initrd_size 0x${filesize}\0" \
217 "run load_kernel; run load_initrd; run load_dtb; " \
218 "bootz ${loadaddr} ${initrd_addr}:${initrd_size} " \
220 "bootcmd=run mmcboot\0" \
223 #endif /* __CONFIG_H__ */