Merge branch 'master' of git://git.denx.de/u-boot-sh
[platform/kernel/u-boot.git] / include / configs / s32v234evb.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2015-2016 Freescale Semiconductor, Inc.
4  *
5  * Configuration settings for the Freescale S32V234 EVB board.
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #include <asm/arch/imx-regs.h>
12
13 #define CONFIG_S32V234
14
15 /* Config GIC */
16 #define CONFIG_GICV2
17 #define GICD_BASE 0x7D001000
18 #define GICC_BASE 0x7D002000
19
20 #define CONFIG_REMAKE_ELF
21 #undef CONFIG_RUN_FROM_IRAM_ONLY
22
23 #define CONFIG_RUN_FROM_DDR1
24 #undef CONFIG_RUN_FROM_DDR0
25
26 /* Run by default from DDR1  */
27 #ifdef CONFIG_RUN_FROM_DDR0
28 #define DDR_BASE_ADDR           0x80000000
29 #else
30 #define DDR_BASE_ADDR           0xC0000000
31 #endif
32
33 #define CONFIG_MACH_TYPE                4146
34
35 #define CONFIG_SKIP_LOWLEVEL_INIT
36
37 /* Config CACHE */
38 #define CONFIG_CMD_CACHE
39
40 #define CONFIG_SYS_FULL_VA
41
42 /* Enable passing of ATAGs */
43 #define CONFIG_CMDLINE_TAG
44
45 /* SMP Spin Table Definitions */
46 #define CPU_RELEASE_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
47
48 /* Generic Timer Definitions */
49 #define COUNTER_FREQUENCY               (1000000000)    /* 1000MHz */
50 #define CONFIG_SYS_FSL_ERRATUM_A008585
51
52 /* Size of malloc() pool */
53 #ifdef CONFIG_RUN_FROM_IRAM_ONLY
54 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1 * 1024 * 1024)
55 #else
56 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
57 #endif
58
59 #define LINFLEXUART_BASE                LINFLEXD0_BASE_ADDR
60
61 #define CONFIG_DEBUG_UART_LINFLEXUART
62 #define CONFIG_DEBUG_UART_BASE          LINFLEXUART_BASE
63
64 /* Allow to overwrite serial and ethaddr */
65 #define CONFIG_ENV_OVERWRITE
66 #define CONFIG_SYS_UART_PORT            (1)
67
68 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC_BASE_ADDR
69 #define CONFIG_SYS_FSL_ESDHC_NUM        1
70
71 #define CONFIG_CMD_MMC
72 /* #define CONFIG_CMD_EXT2 EXT2 Support */
73
74 #if 0
75
76 /* Ethernet config */
77 #define CONFIG_CMD_MII
78 #define CONFIG_FEC_MXC
79 #define IMX_FEC_BASE            ENET_BASE_ADDR
80 #define CONFIG_FEC_XCV_TYPE     RMII
81 #define CONFIG_FEC_MXC_PHYADDR  0
82 #endif
83
84 #if 0                           /* Disable until the FLASH will be implemented */
85 #define CONFIG_SYS_USE_NAND
86 #endif
87
88 #ifdef CONFIG_SYS_USE_NAND
89 /* Nand Flash Configs */
90 #define CONFIG_JFFS2_NAND
91 #define MTD_NAND_FSL_NFC_SWECC 1
92 #define CONFIG_NAND_FSL_NFC
93 #define CONFIG_SYS_NAND_BASE            0x400E0000
94 #define CONFIG_SYS_MAX_NAND_DEVICE      1
95 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
96 #define CONFIG_SYS_NAND_SELECT_DEVICE
97 #define CONFIG_SYS_64BIT_VSPRINTF       /* needed for nand_util.c */
98 #endif
99
100 #define CONFIG_LOADADDR                 0xC307FFC0
101
102 #define CONFIG_EXTRA_ENV_SETTINGS \
103         "boot_scripts=boot.scr.uimg boot.scr\0" \
104         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
105         "console=ttyLF0,115200\0" \
106         "fdt_file=s32v234-evb.dtb\0" \
107         "fdt_high=0xffffffff\0" \
108         "initrd_high=0xffffffff\0" \
109         "fdt_addr_r=0xC2000000\0" \
110         "kernel_addr_r=0xC307FFC0\0" \
111         "ramdisk_addr_r=0xC4000000\0" \
112         "ramdisk=rootfs.uimg\0"\
113         "ip_dyn=yes\0" \
114         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
115         "update_sd_firmware_filename=u-boot.imx\0" \
116         "update_sd_firmware=" \
117                 "if test ${ip_dyn} = yes; then " \
118                         "setenv get_cmd dhcp; " \
119                 "else " \
120                         "setenv get_cmd tftp; " \
121                 "fi; " \
122                 "if mmc dev ${mmcdev}; then "   \
123                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
124                                 "setexpr fw_sz ${filesize} / 0x200; " \
125                                 "setexpr fw_sz ${fw_sz} + 1; "  \
126                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
127                         "fi; "  \
128                 "fi\0" \
129         "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} ${ramdisk}\0" \
130         "jtagboot=echo Booting using jtag...; " \
131                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
132         "jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \
133                 "run loaduimage; run loadramdisk; run loadfdt;"\
134                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
135         "boot_net_usb_start=true\0" \
136         BOOTENV
137
138 #define BOOT_TARGET_DEVICES(func) \
139         func(MMC, mmc, 1) \
140         func(MMC, mmc, 0) \
141         func(DHCP, dhcp, na)
142
143 #define CONFIG_BOOTCOMMAND \
144         "run distro_bootcmd"
145
146 #include <config_distro_bootcmd.h>
147
148 /* Miscellaneous configurable options */
149 #define CONFIG_SYS_PROMPT               "=> "
150
151 #define CONFIG_SYS_MEMTEST_START        (DDR_BASE_ADDR)
152 #define CONFIG_SYS_MEMTEST_END          (DDR_BASE_ADDR + 0x7C00000)
153
154 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
155 #define CONFIG_SYS_HZ                           1000
156
157 #ifdef CONFIG_RUN_FROM_IRAM_ONLY
158 #define CONFIG_SYS_MALLOC_BASE          (DDR_BASE_ADDR)
159 #endif
160
161 #if 0
162 /* Configure PXE */
163 #define CONFIG_BOOTP_PXE_CLIENTARCH     0x100
164 #endif
165
166 /* Physical memory map */
167 /* EVB board has 2x256 MB DDR chips, DDR0 and DDR1, u-boot is using just one */
168 #define PHYS_SDRAM                      (DDR_BASE_ADDR)
169 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
170
171 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
172 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
173 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
174
175 #define CONFIG_SYS_INIT_SP_OFFSET \
176         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
177 #define CONFIG_SYS_INIT_SP_ADDR \
178         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
179
180 /* environment organization */
181
182 #define CONFIG_SYS_MMC_ENV_DEV          0
183
184
185 #define CONFIG_BOOTP_BOOTFILESIZE
186
187 #endif