Merge branch 'master' of git://git.denx.de/u-boot-sh
[platform/kernel/u-boot.git] / include / configs / s32v234evb.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2015-2016 Freescale Semiconductor, Inc.
4  *
5  * Configuration settings for the Freescale S32V234 EVB board.
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #include <asm/arch/imx-regs.h>
12
13 #define CONFIG_S32V234
14
15 /* Config GIC */
16 #define CONFIG_GICV2
17 #define GICD_BASE 0x7D001000
18 #define GICC_BASE 0x7D002000
19
20 #define CONFIG_REMAKE_ELF
21 #undef CONFIG_RUN_FROM_IRAM_ONLY
22
23 #define CONFIG_RUN_FROM_DDR1
24 #undef CONFIG_RUN_FROM_DDR0
25
26 /* Run by default from DDR1  */
27 #ifdef CONFIG_RUN_FROM_DDR0
28 #define DDR_BASE_ADDR           0x80000000
29 #else
30 #define DDR_BASE_ADDR           0xC0000000
31 #endif
32
33 #define CONFIG_MACH_TYPE                4146
34
35 #define CONFIG_SKIP_LOWLEVEL_INIT
36
37 /* Config CACHE */
38 #define CONFIG_CMD_CACHE
39
40 #define CONFIG_SYS_FULL_VA
41
42 /* Enable passing of ATAGs */
43 #define CONFIG_CMDLINE_TAG
44
45 /* SMP Spin Table Definitions */
46 #define CPU_RELEASE_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
47
48 /* Generic Timer Definitions */
49 #define COUNTER_FREQUENCY               (1000000000)    /* 1000MHz */
50 #define CONFIG_SYS_FSL_ERRATUM_A008585
51
52 /* Size of malloc() pool */
53 #ifdef CONFIG_RUN_FROM_IRAM_ONLY
54 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1 * 1024 * 1024)
55 #else
56 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
57 #endif
58
59 #define LINFLEXUART_BASE                LINFLEXD0_BASE_ADDR
60
61 #define CONFIG_DEBUG_UART_LINFLEXUART
62 #define CONFIG_DEBUG_UART_BASE          LINFLEXUART_BASE
63
64 /* Allow to overwrite serial and ethaddr */
65 #define CONFIG_ENV_OVERWRITE
66 #define CONFIG_SYS_UART_PORT            (1)
67
68 #define CONFIG_FSL_USDHC
69 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC_BASE_ADDR
70 #define CONFIG_SYS_FSL_ESDHC_NUM        1
71
72 #define CONFIG_CMD_MMC
73 /* #define CONFIG_CMD_EXT2 EXT2 Support */
74
75 #if 0
76
77 /* Ethernet config */
78 #define CONFIG_CMD_MII
79 #define CONFIG_FEC_MXC
80 #define IMX_FEC_BASE            ENET_BASE_ADDR
81 #define CONFIG_FEC_XCV_TYPE     RMII
82 #define CONFIG_FEC_MXC_PHYADDR  0
83 #endif
84
85 #if 0                           /* Disable until the FLASH will be implemented */
86 #define CONFIG_SYS_USE_NAND
87 #endif
88
89 #ifdef CONFIG_SYS_USE_NAND
90 /* Nand Flash Configs */
91 #define CONFIG_JFFS2_NAND
92 #define MTD_NAND_FSL_NFC_SWECC 1
93 #define CONFIG_NAND_FSL_NFC
94 #define CONFIG_SYS_NAND_BASE            0x400E0000
95 #define CONFIG_SYS_MAX_NAND_DEVICE      1
96 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
97 #define CONFIG_SYS_NAND_SELECT_DEVICE
98 #define CONFIG_SYS_64BIT_VSPRINTF       /* needed for nand_util.c */
99 #endif
100
101 #define CONFIG_LOADADDR                 0xC307FFC0
102
103 #define CONFIG_EXTRA_ENV_SETTINGS \
104         "boot_scripts=boot.scr.uimg boot.scr\0" \
105         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
106         "console=ttyLF0,115200\0" \
107         "fdt_file=s32v234-evb.dtb\0" \
108         "fdt_high=0xffffffff\0" \
109         "initrd_high=0xffffffff\0" \
110         "fdt_addr_r=0xC2000000\0" \
111         "kernel_addr_r=0xC307FFC0\0" \
112         "ramdisk_addr_r=0xC4000000\0" \
113         "ramdisk=rootfs.uimg\0"\
114         "ip_dyn=yes\0" \
115         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
116         "update_sd_firmware_filename=u-boot.imx\0" \
117         "update_sd_firmware=" \
118                 "if test ${ip_dyn} = yes; then " \
119                         "setenv get_cmd dhcp; " \
120                 "else " \
121                         "setenv get_cmd tftp; " \
122                 "fi; " \
123                 "if mmc dev ${mmcdev}; then "   \
124                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
125                                 "setexpr fw_sz ${filesize} / 0x200; " \
126                                 "setexpr fw_sz ${fw_sz} + 1; "  \
127                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
128                         "fi; "  \
129                 "fi\0" \
130         "loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} ${ramdisk}\0" \
131         "jtagboot=echo Booting using jtag...; " \
132                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
133         "jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \
134                 "run loaduimage; run loadramdisk; run loadfdt;"\
135                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
136         "boot_net_usb_start=true\0" \
137         BOOTENV
138
139 #define BOOT_TARGET_DEVICES(func) \
140         func(MMC, mmc, 1) \
141         func(MMC, mmc, 0) \
142         func(DHCP, dhcp, na)
143
144 #define CONFIG_BOOTCOMMAND \
145         "run distro_bootcmd"
146
147 #include <config_distro_bootcmd.h>
148
149 /* Miscellaneous configurable options */
150 #define CONFIG_SYS_PROMPT               "=> "
151
152 #define CONFIG_SYS_MEMTEST_START        (DDR_BASE_ADDR)
153 #define CONFIG_SYS_MEMTEST_END          (DDR_BASE_ADDR + 0x7C00000)
154
155 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
156 #define CONFIG_SYS_HZ                           1000
157
158 #ifdef CONFIG_RUN_FROM_IRAM_ONLY
159 #define CONFIG_SYS_MALLOC_BASE          (DDR_BASE_ADDR)
160 #endif
161
162 #if 0
163 /* Configure PXE */
164 #define CONFIG_BOOTP_PXE_CLIENTARCH     0x100
165 #endif
166
167 /* Physical memory map */
168 /* EVB board has 2x256 MB DDR chips, DDR0 and DDR1, u-boot is using just one */
169 #define PHYS_SDRAM                      (DDR_BASE_ADDR)
170 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
171
172 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
173 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
174 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
175
176 #define CONFIG_SYS_INIT_SP_OFFSET \
177         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
178 #define CONFIG_SYS_INIT_SP_ADDR \
179         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
180
181 /* environment organization */
182 #define CONFIG_ENV_SIZE                 (8 * 1024)
183
184 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
185 #define CONFIG_SYS_MMC_ENV_DEV          0
186
187
188 #define CONFIG_BOOTP_BOOTFILESIZE
189
190 #endif