Merge branch 'master' of git://git.denx.de/u-boot-rockchip
[platform/kernel/u-boot.git] / include / configs / rut.h
1 /*
2  * siemens rut
3  * (C) Copyright 2013 Siemens Schweiz AG
4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  *
6  * Based on:
7  * U-Boot file:/include/configs/am335x_evm.h
8  *
9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10  *
11  * SPDX-License-Identifier:     GPL-2.0+
12  */
13
14 #ifndef __CONFIG_RUT_H
15 #define __CONFIG_RUT_H
16
17 #define CONFIG_SIEMENS_RUT
18 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_RUT
19
20 #include "siemens-am33x-common.h"
21
22 #define RUT_IOCTRL_VAL  0x18b
23 #define DDR_PLL_FREQ    303
24
25  /* Physical Memory Map */
26 #define CONFIG_MAX_RAM_BANK_SIZE        (256 << 20) /* 256 MiB */
27
28 /* I2C Configuration */
29 #define CONFIG_SYS_I2C_SPEED            100000
30
31 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
32 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
33 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
34 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
35
36 #define CONFIG_PHY_NATSEMI
37
38 #define CONFIG_FACTORYSET
39
40 /* Watchdog */
41 #define WATCHDOG_TRIGGER_GPIO   14
42
43 #ifndef CONFIG_SPL_BUILD
44
45 /* Use common default */
46 #define MTDPARTS_DEFAULT        MTDPARTS_DEFAULT_V1
47
48 /* Default env settings */
49 #define CONFIG_EXTRA_ENV_SETTINGS \
50         "hostname=rut\0" \
51         "ubi_off=2048\0"\
52         "nand_img_size=0x500000\0" \
53         "splashpos=m,m\0" \
54         "optargs=fixrtc --no-log consoleblank=0 \0" \
55         CONFIG_ENV_SETTINGS_V1 \
56         CONFIG_ENV_SETTINGS_NAND_V1 \
57         "mmc_dev=0\0" \
58         "mmc_root=/dev/mmcblk0p2 rw\0" \
59         "mmc_root_fs_type=ext4 rootwait\0" \
60         "mmc_load_uimage=" \
61                 "mmc rescan; " \
62                 "setenv bootfile uImage;" \
63                 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
64         "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
65         "importbootenv=echo Importing environment from mmc ...; " \
66                 "env import -t $loadaddr $filesize\0" \
67         "mmc_args=run bootargs_defaults;" \
68                 "mtdparts default;" \
69                 "setenv bootargs ${bootargs} " \
70                 "root=${mmc_root} ${mtdparts}" \
71                 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
72                 "eth=${ethaddr} " \
73                 "\0" \
74         "mmc_boot=run mmc_args; " \
75                 "run mmc_load_uimage; " \
76                 "bootm ${kloadaddr}\0" \
77         ""
78
79 #ifndef CONFIG_RESTORE_FLASH
80 /* set to negative value for no autoboot */
81
82 #define CONFIG_BOOTCOMMAND \
83         "if mmc rescan; then " \
84                 "echo SD/MMC found on device ${mmc_dev};" \
85                 "if run loadbootenv; then " \
86                         "echo Loaded environment from ${bootenv};" \
87                         "run importbootenv;" \
88                 "fi;" \
89                 "if test -n $uenvcmd; then " \
90                         "echo Running uenvcmd ...;" \
91                         "run uenvcmd;" \
92                 "fi;" \
93                 "if run mmc_load_uimage; then " \
94                         "run mmc_args;" \
95                         "bootm ${kloadaddr};" \
96                 "fi;" \
97         "fi;" \
98         "run nand_boot;" \
99         "reset;"
100
101 #else
102
103 #define CONFIG_BOOTCOMMAND                      \
104         "setenv autoload no; "                  \
105         "dhcp; "                                \
106         "if tftp 80000000 debrick.scr; then "   \
107                 "source 80000000; "             \
108         "fi"
109 #endif
110
111 #endif /* CONFIG_SPL_BUILD */
112
113 #if defined(CONFIG_VIDEO)
114 #define CONFIG_VIDEO_DA8XX
115 #define CONFIG_SPLASH_SCREEN
116 #define CONFIG_SPLASH_SCREEN_ALIGN
117 #define CONFIG_VIDEO_LOGO
118 #define CONFIG_VIDEO_BMP_RLE8
119 #define CONFIG_VIDEO_BMP_LOGO
120 #define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
121
122 #define CONFIG_SPI
123
124 #define BOARD_LCD_RESET         115     /* Bank 3 pin 19 */
125 #define CONFIG_FORMIKE
126 #define DISPL_PLL_SPREAD_SPECTRUM
127 #endif
128
129 #endif  /* ! __CONFIG_RUT_H */