Merge branch 'master' of git://git.denx.de/u-boot-i2c
[platform/kernel/u-boot.git] / include / configs / rut.h
1 /*
2  * siemens rut
3  * (C) Copyright 2013 Siemens Schweiz AG
4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  *
6  * Based on:
7  * U-Boot file:/include/configs/am335x_evm.h
8  *
9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10  *
11  * SPDX-License-Identifier:     GPL-2.0+
12  */
13
14 #ifndef __CONFIG_RUT_H
15 #define __CONFIG_RUT_H
16
17 #define CONFIG_SIEMENS_RUT
18 #define MACH_TYPE_RUT                   4316
19 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_RUT
20
21 #include "siemens-am33x-common.h"
22
23 #define CONFIG_SYS_MPUCLK       600
24 #define RUT_IOCTRL_VAL  0x18b
25 #define DDR_PLL_FREQ    303
26
27  /* Physical Memory Map */
28 #define CONFIG_MAX_RAM_BANK_SIZE        (256 << 20) /* 256 MiB */
29
30 /* I2C Configuration */
31 #define CONFIG_SYS_I2C_SPEED            100000
32
33 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
34 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
35 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
36 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
37
38 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200
39
40 #undef CONFIG_SPL_NET_SUPPORT
41 #undef CONFIG_SPL_NET_VCI_STRING
42 #undef CONFIG_SPL_ETH_SUPPORT
43
44 #define CONFIG_PHY_ADDR                 1
45 #define CONFIG_PHY_NATSEMI
46
47 #define CONFIG_FACTORYSET
48
49 /* UBI Support */
50 #ifndef CONFIG_SPL_BUILD
51 #define CONFIG_CMD_MTDPARTS
52 #define CONFIG_MTD_PARTITIONS
53 #define CONFIG_MTD_DEVICE
54 #define CONFIG_RBTREE
55 #define CONFIG_LZO
56 #define CONFIG_CMD_UBI
57 #define CONFIG_CMD_UBIFS
58 #endif
59
60 /* Watchdog */
61 #define WATCHDOG_TRIGGER_GPIO   14
62
63 #ifndef CONFIG_SPL_BUILD
64
65 /* Default env settings */
66 #define CONFIG_EXTRA_ENV_SETTINGS \
67         "hostname=rut\0" \
68         "splashpos=488,352\0" \
69         "optargs=fixrtc --no-log consoleblank=0 \0" \
70         CONFIG_COMMON_ENV_SETTINGS \
71         "mmc_dev=0\0" \
72         "mmc_root=/dev/mmcblk0p2 rw\0" \
73         "mmc_root_fs_type=ext4 rootwait\0" \
74         "mmc_load_uimage=" \
75                 "mmc rescan; " \
76                 "setenv bootfile uImage;" \
77                 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
78         "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
79         "importbootenv=echo Importing environment from mmc ...; " \
80                 "env import -t $loadaddr $filesize\0" \
81         "mmc_args=run bootargs_defaults;" \
82                 "mtdparts default;" \
83                 "setenv bootargs ${bootargs} " \
84                 "root=${mmc_root} ${mtdparts}" \
85                 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
86                 "eth=${ethaddr} " \
87                 "\0" \
88         "mmc_boot=run mmc_args; " \
89                 "run mmc_load_uimage; " \
90                 "bootm ${kloadaddr}\0" \
91         ""
92
93 #ifndef CONFIG_RESTORE_FLASH
94 /* set to negative value for no autoboot */
95 #define CONFIG_BOOTDELAY                3
96
97 #define CONFIG_BOOTCOMMAND \
98         "if mmc rescan; then " \
99                 "echo SD/MMC found on device ${mmc_dev};" \
100                 "if run loadbootenv; then " \
101                         "echo Loaded environment from ${bootenv};" \
102                         "run importbootenv;" \
103                 "fi;" \
104                 "if test -n $uenvcmd; then " \
105                         "echo Running uenvcmd ...;" \
106                         "run uenvcmd;" \
107                 "fi;" \
108                 "if run mmc_load_uimage; then " \
109                         "run mmc_args;" \
110                         "bootm ${kloadaddr};" \
111                 "fi;" \
112         "fi;" \
113         "run nand_boot;" \
114         "if ping ${serverip}; then " \
115                 "run net_nfs; " \
116         "fi; "
117
118 #else
119 #define CONFIG_BOOTDELAY                0
120
121 #define CONFIG_BOOTCOMMAND                      \
122         "setenv autoload no; "                  \
123         "dhcp; "                                \
124         "if tftp 80000000 debrick.scr; then "   \
125                 "source 80000000; "             \
126         "fi"
127 #endif
128
129 #endif /* CONFIG_SPL_BUILD */
130
131 #ifdef CONFIG_SPL_BUILD
132 #undef CONFIG_HW_WATCHDOG
133 #endif
134
135 #define CONFIG_VIDEO
136 #if defined(CONFIG_VIDEO)
137 #define CONFIG_VIDEO_DA8XX
138 #define CONFIG_CFB_CONSOLE
139 #define CONFIG_VGA_AS_SINGLE_DEVICE
140 #define CONFIG_SPLASH_SCREEN
141 #define CONFIG_SPLASH_SCREEN_ALIGN
142 #define CONFIG_VIDEO_LOGO
143 #define CONFIG_VIDEO_BMP_RLE8
144 #define CONFIG_VIDEO_BMP_LOGO
145 #define CONFIG_CMD_BMP
146 #define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
147
148 #define CONFIG_SPI
149 #define CONFIG_OMAP3_SPI
150
151 #define BOARD_LCD_RESET         115     /* Bank 3 pin 19 */
152 #define CONFIG_ARCH_EARLY_INIT_R
153 #define CONFIG_FORMIKE
154 #endif
155
156 #endif  /* ! __CONFIG_RUT_H */