include/configs/rut.h

   1 /*
   2  * siemens rut
   3  * (C) Copyright 2013 Siemens Schweiz AG
   4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * U-Boot file:/include/configs/am335x_evm.h
   8  *
   9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef __CONFIG_RUT_H
  15 #define __CONFIG_RUT_H
  16
  17 #define CONFIG_SIEMENS_RUT
  18 #define MACH_TYPE_RUT                   4316
  19 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_RUT
  20
  21 #include "siemens-am33x-common.h"
  22
  23 #define CONFIG_SYS_MPUCLK       600
  24 #define RUT_IOCTRL_VAL  0x18b
  25 #define DDR_PLL_FREQ    303
  26
  27  /* Physical Memory Map */
  28 #define CONFIG_MAX_RAM_BANK_SIZE        (256 << 20) /* 256 MiB */
  29
  30 /* I2C Configuration */
  31 #define CONFIG_SYS_I2C_SPEED            100000
  32
  33 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
  34 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
  35 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
  36 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
  37
  38 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200
  39
  40 #undef CONFIG_SPL_NET_SUPPORT
  41 #undef CONFIG_SPL_NET_VCI_STRING
  42 #undef CONFIG_SPL_ETH_SUPPORT
  43
  44 #define CONFIG_PHY_ADDR                 1
  45 #define CONFIG_PHY_NATSEMI
  46
  47 #define CONFIG_FACTORYSET
  48
  49 /* UBI Support */
  50 #ifndef CONFIG_SPL_BUILD
  51 #define CONFIG_CMD_MTDPARTS
  52 #define CONFIG_MTD_PARTITIONS
  53 #define CONFIG_MTD_DEVICE
  54 #define CONFIG_RBTREE
  55 #define CONFIG_LZO
  56 #define CONFIG_CMD_UBI
  57 #define CONFIG_CMD_UBIFS
  58 #endif
  59
  60 /* Watchdog */
  61 #define WATCHDOG_TRIGGER_GPIO   14
  62
  63 #ifndef CONFIG_SPL_BUILD
  64
  65 /* Default env settings */
  66 #define CONFIG_EXTRA_ENV_SETTINGS \
  67         "hostname=rut\0" \
  68         "splashpos=488,352\0" \
  69         "optargs=fixrtc --no-log consoleblank=0 \0" \
  70         CONFIG_COMMON_ENV_SETTINGS \
  71         "mmc_dev=0\0" \
  72         "mmc_root=/dev/mmcblk0p2 rw\0" \
  73         "mmc_root_fs_type=ext4 rootwait\0" \
  74         "mmc_load_uimage=" \
  75                 "mmc rescan; " \
  76                 "setenv bootfile uImage;" \
  77                 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
  78         "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
  79         "importbootenv=echo Importing environment from mmc ...; " \
  80                 "env import -t $loadaddr $filesize\0" \
  81         "mmc_args=run bootargs_defaults;" \
  82                 "mtdparts default;" \
  83                 "setenv bootargs ${bootargs} " \
  84                 "root=${mmc_root} ${mtdparts}" \
  85                 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
  86                 "eth=${ethaddr} " \
  87                 "\0" \
  88         "mmc_boot=run mmc_args; " \
  89                 "run mmc_load_uimage; " \
  90                 "bootm ${kloadaddr}\0" \
  91         ""
  92
  93 #ifndef CONFIG_RESTORE_FLASH
  94 /* set to negative value for no autoboot */
  95 #define CONFIG_BOOTDELAY                3
  96
  97 #define CONFIG_BOOTCOMMAND \
  98         "if mmc rescan; then " \
  99                 "echo SD/MMC found on device ${mmc_dev};" \
 100                 "if run loadbootenv; then " \
 101                         "echo Loaded environment from ${bootenv};" \
 102                         "run importbootenv;" \
 103                 "fi;" \
 104                 "if test -n $uenvcmd; then " \
 105                         "echo Running uenvcmd ...;" \
 106                         "run uenvcmd;" \
 107                 "fi;" \
 108                 "if run mmc_load_uimage; then " \
 109                         "run mmc_args;" \
 110                         "bootm ${kloadaddr};" \
 111                 "fi;" \
 112         "fi;" \
 113         "run nand_boot;" \
 114         "if ping ${serverip}; then " \
 115                 "run net_nfs; " \
 116         "fi; "
 117
 118 #else
 119 #define CONFIG_BOOTDELAY                0
 120
 121 #define CONFIG_BOOTCOMMAND                      \
 122         "setenv autoload no; "                  \
 123         "dhcp; "                                \
 124         "if tftp 80000000 debrick.scr; then "   \
 125                 "source 80000000; "             \
 126         "fi"
 127 #endif
 128
 129 #endif /* CONFIG_SPL_BUILD */
 130
 131 #ifdef CONFIG_SPL_BUILD
 132 #undef CONFIG_HW_WATCHDOG
 133 #endif
 134
 135 #define CONFIG_VIDEO
 136 #if defined(CONFIG_VIDEO)
 137 #define CONFIG_VIDEO_DA8XX
 138 #define CONFIG_CFB_CONSOLE
 139 #define CONFIG_VGA_AS_SINGLE_DEVICE
 140 #define CONFIG_SPLASH_SCREEN
 141 #define CONFIG_SPLASH_SCREEN_ALIGN
 142 #define CONFIG_VIDEO_LOGO
 143 #define CONFIG_VIDEO_BMP_RLE8
 144 #define CONFIG_VIDEO_BMP_LOGO
 145 #define CONFIG_CMD_BMP
 146 #define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
 147
 148 #define CONFIG_SPI
 149 #define CONFIG_OMAP3_SPI
 150
 151 #define BOARD_LCD_RESET         115     /* Bank 3 pin 19 */
 152 #define CONFIG_ARCH_EARLY_INIT_R
 153 #define CONFIG_FORMIKE
 154 #endif
 155
 156 #endif  /* ! __CONFIG_RUT_H */