include/configs/rut.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * siemens rut
   4  * (C) Copyright 2013 Siemens Schweiz AG
   5  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   6  *
   7  * Based on:
   8  * U-Boot file:/include/configs/am335x_evm.h
   9  *
  10  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  11  */
  12
  13 #ifndef __CONFIG_RUT_H
  14 #define __CONFIG_RUT_H
  15
  16 #include "siemens-am33x-common.h"
  17
  18 #define RUT_IOCTRL_VAL  0x18b
  19 #define DDR_PLL_FREQ    303
  20
  21  /* Physical Memory Map */
  22 #define CONFIG_MAX_RAM_BANK_SIZE        (256 << 20) /* 256 MiB */
  23
  24 #define CONFIG_FACTORYSET
  25
  26 /* Watchdog */
  27 #define WATCHDOG_TRIGGER_GPIO   14
  28
  29 #ifndef CONFIG_SPL_BUILD
  30
  31 /* Use common default */
  32
  33 /* Default env settings */
  34 #define CONFIG_EXTRA_ENV_SETTINGS \
  35         "hostname=rut\0" \
  36         "ubi_off=2048\0"\
  37         "nand_img_size=0x500000\0" \
  38         "splashpos=m,m\0" \
  39         "optargs=fixrtc --no-log consoleblank=0 \0" \
  40         CONFIG_ENV_SETTINGS_V1 \
  41         CONFIG_ENV_SETTINGS_NAND_V1 \
  42         "mmc_dev=0\0" \
  43         "mmc_root=/dev/mmcblk0p2 rw\0" \
  44         "mmc_root_fs_type=ext4 rootwait\0" \
  45         "mmc_load_uimage=" \
  46                 "mmc rescan; " \
  47                 "setenv bootfile uImage;" \
  48                 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
  49         "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
  50         "importbootenv=echo Importing environment from mmc ...; " \
  51                 "env import -t $loadaddr $filesize\0" \
  52         "mmc_args=run bootargs_defaults;" \
  53                 "mtdparts default;" \
  54                 "setenv bootargs ${bootargs} " \
  55                 "root=${mmc_root} ${mtdparts}" \
  56                 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
  57                 "eth=${ethaddr} " \
  58                 "\0" \
  59         "mmc_boot=run mmc_args; " \
  60                 "run mmc_load_uimage; " \
  61                 "bootm ${kloadaddr}\0" \
  62         ""
  63
  64 #ifndef CONFIG_RESTORE_FLASH
  65 /* set to negative value for no autoboot */
  66
  67 #define CONFIG_BOOTCOMMAND \
  68         "if mmc rescan; then " \
  69                 "echo SD/MMC found on device ${mmc_dev};" \
  70                 "if run loadbootenv; then " \
  71                         "echo Loaded environment from ${bootenv};" \
  72                         "run importbootenv;" \
  73                 "fi;" \
  74                 "if test -n $uenvcmd; then " \
  75                         "echo Running uenvcmd ...;" \
  76                         "run uenvcmd;" \
  77                 "fi;" \
  78                 "if run mmc_load_uimage; then " \
  79                         "run mmc_args;" \
  80                         "bootm ${kloadaddr};" \
  81                 "fi;" \
  82         "fi;" \
  83         "run nand_boot;" \
  84         "reset;"
  85
  86 #else
  87
  88 #define CONFIG_BOOTCOMMAND                      \
  89         "setenv autoload no; "                  \
  90         "dhcp; "                                \
  91         "if tftp 80000000 debrick.scr; then "   \
  92                 "source 80000000; "             \
  93         "fi"
  94 #endif
  95
  96 #endif /* CONFIG_SPL_BUILD */
  97
  98 #if defined(CONFIG_VIDEO)
  99 #define CONFIG_VIDEO_DA8XX
 100 #define CONFIG_VIDEO_LOGO
 101 #define CONFIG_VIDEO_BMP_LOGO
 102 #define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
 103
 104 #define BOARD_LCD_RESET         115     /* Bank 3 pin 19 */
 105 #define CONFIG_FORMIKE
 106 #define DISPL_PLL_SPREAD_SPECTRUM
 107 #endif
 108
 109 #endif  /* ! __CONFIG_RUT_H */