include/configs/rk3399_common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2016 Rockchip Electronics Co., Ltd
   4  */
   5
   6 #ifndef __CONFIG_RK3399_COMMON_H
   7 #define __CONFIG_RK3399_COMMON_H
   8
   9 #include "rockchip-common.h"
  10
  11 #define CONFIG_SYS_MALLOC_LEN           (32 << 20)
  12 #define CONFIG_SYS_CBSIZE               1024
  13 #define CONFIG_SKIP_LOWLEVEL_INIT
  14
  15 #define COUNTER_FREQUENCY               24000000
  16
  17 #define CONFIG_SYS_NS16550_MEM32
  18
  19 #define CONFIG_SYS_INIT_SP_ADDR         0x00300000
  20 #define CONFIG_SYS_LOAD_ADDR            0x00800800
  21 #define CONFIG_SPL_STACK                0xff8effff
  22 #define CONFIG_SPL_TEXT_BASE            0xff8c2000
  23 #define CONFIG_SPL_MAX_SIZE             0x30000 - 0x2000
  24 /*  BSS setup */
  25 #define CONFIG_SPL_BSS_START_ADDR       0xff8e0000
  26 #define CONFIG_SPL_BSS_MAX_SIZE         0x10000
  27
  28 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* 64M */
  29
  30 /* MMC/SD IP block */
  31 #define CONFIG_BOUNCE_BUFFER
  32 #define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ  200000000
  33
  34 /* RAW SD card / eMMC locations. */
  35 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (128 << 10)
  36
  37 /* FAT sd card locations. */
  38 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
  39 #define CONFIG_SYS_SDRAM_BASE           0
  40 #define SDRAM_MAX_SIZE                  0xf8000000
  41
  42 #define CONFIG_SF_DEFAULT_SPEED 20000000
  43
  44 #ifndef CONFIG_SPL_BUILD
  45
  46 #define ENV_MEM_LAYOUT_SETTINGS \
  47         "scriptaddr=0x00500000\0" \
  48         "pxefile_addr_r=0x00600000\0" \
  49         "fdt_addr_r=0x01f00000\0" \
  50         "kernel_addr_r=0x02080000\0" \
  51         "ramdisk_addr_r=0x04000000\0"
  52
  53 #include <config_distro_bootcmd.h>
  54 #define CONFIG_EXTRA_ENV_SETTINGS \
  55         ENV_MEM_LAYOUT_SETTINGS \
  56         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
  57         "partitions=" PARTS_DEFAULT \
  58         BOOTENV
  59
  60 #endif
  61
  62 /* enable usb config for usb ether */
  63
  64 #endif