arm, powerpc: select SYS_GENERIC_BOARD
[platform/kernel/u-boot.git] / include / configs / rk3288_common.h
1 /*
2  * (C) Copyright 2015 Google, Inc
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef __CONFIG_RK3288_COMMON_H
8 #define __CONFIG_RK3288_COMMON_H
9
10 #include <asm/arch/hardware.h>
11
12 #define CONFIG_SYS_NO_FLASH
13 #define CONFIG_NR_DRAM_BANKS            1
14 #define CONFIG_ENV_IS_NOWHERE
15 #define CONFIG_ENV_SIZE                 0x2000
16 #define CONFIG_SYS_MAXARGS              16
17 #define CONFIG_BAUDRATE                 115200
18 #define CONFIG_SYS_MALLOC_LEN           (32 << 20)
19 #define CONFIG_SYS_CBSIZE               1024
20 #define CONFIG_SKIP_LOWLEVEL_INIT
21 #define CONFIG_SYS_THUMB_BUILD
22 #define CONFIG_OF_LIBFDT
23 #define CONFIG_DISPLAY_BOARDINFO
24
25 #define CONFIG_SYS_TIMER_RATE           (24 * 1000 * 1000)
26 #define CONFIG_SYS_TIMER_COUNTER        (TIMER7_BASE + 8)
27
28 #define CONFIG_SPL_FRAMEWORK
29 #define CONFIG_SPL_LIBCOMMON_SUPPORT
30 #define CONFIG_SPL_LIBGENERIC_SUPPORT
31 #define CONFIG_SPL_SERIAL_SUPPORT
32 #define CONFIG_SYS_NS16550
33 #define CONFIG_SYS_NS16550_MEM32
34 #define CONFIG_SPL_BOARD_INIT
35
36 #ifdef CONFIG_SPL_BUILD
37 #define CONFIG_SYS_MALLOC_SIMPLE
38 #endif
39
40 #define CONFIG_SYS_TEXT_BASE            0x00100000
41 #define CONFIG_SYS_INIT_SP_ADDR         0x00100000
42 #define CONFIG_SYS_LOAD_ADDR            0x00800800
43 #define CONFIG_SPL_STACK                0xff718000
44 #define CONFIG_SPL_TEXT_BASE            0xff704004
45
46 /* MMC/SD IP block */
47 #define CONFIG_MMC
48 #define CONFIG_GENERIC_MMC
49 #define CONFIG_CMD_MMC
50 #define CONFIG_SDHCI
51 #define CONFIG_DWMMC
52 #define CONFIG_BOUNCE_BUFFER
53
54 #define CONFIG_DOS_PARTITION
55 #define CONFIG_CMD_FAT
56 #define CONFIG_FAT_WRITE
57 #define CONFIG_CMD_EXT2
58 #define CONFIG_CMD_EXT4
59 #define CONFIG_CMD_FS_GENERIC
60 #define CONFIG_PARTITION_UUIDS
61 #define CONFIG_CMD_PART
62
63 /* RAW SD card / eMMC locations. */
64 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 256
65 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (128 << 10)
66
67 /* FAT sd card locations. */
68 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
69 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
70
71 #define CONFIG_SPL_PINCTRL_SUPPORT
72 #define CONFIG_SPL_GPIO_SUPPORT
73 #define CONFIG_SPL_RAM_SUPPORT
74 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
75
76 #define CONFIG_CMD_CACHE
77 #define CONFIG_CMD_TIME
78
79 #define CONFIG_SYS_SDRAM_BASE           0
80 #define CONFIG_NR_DRAM_BANKS            1
81 #define SDRAM_BANK_SIZE                 (2UL << 30)
82
83 #define CONFIG_SPI_FLASH
84 #define CONFIG_SPI
85 #define CONFIG_CMD_SF
86 #define CONFIG_CMD_SPI
87 #define CONFIG_SPI_FLASH_GIGADEVICE
88 #define CONFIG_SF_DEFAULT_SPEED 20000000
89
90 #define CONFIG_CMD_I2C
91
92 #ifndef CONFIG_SPL_BUILD
93 #include <config_distro_defaults.h>
94
95 #define ENV_MEM_LAYOUT_SETTINGS \
96         "scriptaddr=0x00000000\0" \
97         "pxefile_addr_r=0x00100000\0" \
98         "fdt_addr_r=0x01f00000\0" \
99         "kernel_addr_r=0x02000000\0" \
100         "ramdisk_addr_r=0x04000000\0"
101
102 /* First try to boot from SD (index 0), then eMMC (index 1 */
103 #define BOOT_TARGET_DEVICES(func) \
104         func(MMC, mmc, 0) \
105         func(MMC, mmc, 1)
106
107 #include <config_distro_bootcmd.h>
108
109 /* Linux fails to load the fdt if it's loaded above 512M on a Rock 2 board, so
110  * limit the fdt reallocation to that */
111 #define CONFIG_EXTRA_ENV_SETTINGS \
112         "fdt_high=0x1fffffff\0" \
113         ENV_MEM_LAYOUT_SETTINGS \
114         BOOTENV
115 #endif
116
117 #endif