2 * Configuration for AMCC 460SX Ref (redwood)
5 * Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com
7 * SPDX-License-Identifier: GPL-2.0+
12 /*-----------------------------------------------------------------------
13 * High Level Configuration Options
14 *----------------------------------------------------------------------*/
15 #define CONFIG_440 1 /* ... PPC460 family */
16 #define CONFIG_460SX 1 /* ... PPC460 family */
17 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
19 #define CONFIG_SYS_TEXT_BASE 0xfffb0000
21 /*-----------------------------------------------------------------------
22 * Include common defines/options for all AMCC boards
23 *----------------------------------------------------------------------*/
24 #define CONFIG_HOSTNAME redwood
26 #include "amcc-common.h"
28 #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
30 /*-----------------------------------------------------------------------
31 * Base addresses -- Note these are effective addresses where the
32 * actual resources get mapped (not physical addresses)
33 *----------------------------------------------------------------------*/
34 #define CONFIG_SYS_FLASH_BASE 0xfff00000 /* start of FLASH */
35 #define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */
37 #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
39 #define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */
40 #define CONFIG_SYS_PCIE0_MEMBASE 0x90000000 /* mapped PCIe memory */
41 #define CONFIG_SYS_PCIE1_MEMBASE 0xa0000000 /* mapped PCIe memory */
42 #define CONFIG_SYS_PCIE_MEMSIZE 0x01000000
44 #define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000
45 #define CONFIG_SYS_PCIE1_XCFGBASE 0xb2000000
46 #define CONFIG_SYS_PCIE2_XCFGBASE 0xb4000000
47 #define CONFIG_SYS_PCIE0_CFGBASE 0xb6000000
48 #define CONFIG_SYS_PCIE1_CFGBASE 0xb8000000
49 #define CONFIG_SYS_PCIE2_CFGBASE 0xba000000
51 /* PCIe mapped UTL registers */
52 #define CONFIG_SYS_PCIE0_REGBASE 0xd0000000
53 #define CONFIG_SYS_PCIE1_REGBASE 0xd0010000
54 #define CONFIG_SYS_PCIE2_REGBASE 0xd0020000
56 /* System RAM mapped to PCI space */
57 #define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
58 #define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
59 #define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
61 #define CONFIG_SYS_FPGA_BASE 0xe2000000 /* epld */
62 #define CONFIG_SYS_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */
67 #define CONFIG_CONS_INDEX 1 /* Use UART0 */
69 /*-----------------------------------------------------------------------
70 * Initial RAM & stack pointer (placed in internal SRAM)
71 *----------------------------------------------------------------------*/
72 #define CONFIG_SYS_TEMP_STACK_OCM 1
73 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
74 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
75 #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
77 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
78 #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
80 /*-----------------------------------------------------------------------
82 *----------------------------------------------------------------------*/
83 #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
84 #define CONFIG_DDR_ECC 1 /* with ECC support */
86 #define CONFIG_SYS_SPD_MAX_DIMMS 2
88 /* SPD i2c spd addresses */
89 #define SPD_EEPROM_ADDRESS {IIC0_DIMM0_ADDR, IIC0_DIMM1_ADDR}
90 #define IIC0_DIMM0_ADDR 0x53
91 #define IIC0_DIMM1_ADDR 0x52
93 /*-----------------------------------------------------------------------
95 *----------------------------------------------------------------------*/
96 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
98 #define IIC0_BOOTPROM_ADDR 0x50
99 #define IIC0_ALT_BOOTPROM_ADDR 0x54
101 /* Don't probe these addrs */
102 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x50}, {0, 0x52}, {0, 0x53}, {0, 0x54} }
104 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
106 /*-----------------------------------------------------------------------
108 *----------------------------------------------------------------------*/
109 #undef CONFIG_ENV_IS_IN_NVRAM /* ... not in NVRAM */
110 #define CONFIG_ENV_IS_IN_FLASH 1 /* Environment uses flash */
111 #undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
113 #define CONFIG_PREBOOT "echo;" \
114 "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
117 #undef CONFIG_BOOTARGS
119 #define CONFIG_EXTRA_ENV_SETTINGS \
120 CONFIG_AMCC_DEF_ENV \
121 CONFIG_AMCC_DEF_ENV_POWERPC \
122 CONFIG_AMCC_DEF_ENV_NOR_UPD \
123 "kernel_addr=fc000000\0" \
124 "fdt_addr=fc1e0000\0" \
125 "ramdisk_addr=fc200000\0" \
128 /*----------------------------------------------------------------------------+
129 | Commands in addition to amcc-common.h
130 +----------------------------------------------------------------------------*/
131 #define CONFIG_CMD_SDRAM
133 #define CONFIG_BOOTCOMMAND "run flash_self"
135 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
137 #define CONFIG_IBM_EMAC4_V4 1
138 #define CONFIG_PHY_RESET 1 /* reset phy upon startup */
139 #define CONFIG_PHY_RESET_DELAY 1000
140 #define CONFIG_M88E1141_PHY 1 /* Enable phy */
141 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
143 #define CONFIG_HAS_ETH0
144 #define CONFIG_HAS_ETH1
145 #define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
146 #define CONFIG_PHY1_ADDR 1 /* PHY address, See schematics */
148 #undef CONFIG_WATCHDOG /* watchdog disabled */
150 /*-----------------------------------------------------------------------
152 *----------------------------------------------------------------------*/
153 #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
154 #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
155 #define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
157 #define CONFIG_SYS_MAX_FLASH_BANKS 3 /* number of banks */
158 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */
160 #undef CONFIG_SYS_FLASH_CHECKSUM
161 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
162 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
164 #ifdef CONFIG_ENV_IS_IN_FLASH
165 #define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
166 #define CONFIG_ENV_ADDR 0xfffa0000
167 #define CONFIG_ENV_SIZE 0x10000 /* Size of Environment vars */
168 #endif /* CONFIG_ENV_IS_IN_FLASH */
170 /*---------------------------------------------------------------------------*/
172 #endif /* __CONFIG_H */