api: Convert to Kconfig
[platform/kernel/u-boot.git] / include / configs / redwood.h
1 /*
2  * Configuration for AMCC 460SX Ref (redwood)
3  *
4  * (C) Copyright 2008
5  * Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 /*-----------------------------------------------------------------------
13  * High Level Configuration Options
14  *----------------------------------------------------------------------*/
15 #define CONFIG_440                      1       /* ... PPC460 family    */
16 #define CONFIG_460SX                    1       /* ... PPC460 family    */
17
18 #define CONFIG_SYS_TEXT_BASE    0xfffb0000
19
20 /*-----------------------------------------------------------------------
21  * Include common defines/options for all AMCC boards
22  *----------------------------------------------------------------------*/
23 #define CONFIG_HOSTNAME         redwood
24
25 #include "amcc-common.h"
26
27 #define CONFIG_SYS_CLK_FREQ     33333333        /* external freq to pll */
28
29 /*-----------------------------------------------------------------------
30  * Base addresses -- Note these are effective addresses where the
31  * actual resources get mapped (not physical addresses)
32  *----------------------------------------------------------------------*/
33 #define CONFIG_SYS_FLASH_BASE           0xfff00000      /* start of FLASH       */
34 #define CONFIG_SYS_ISRAM_BASE           0x90000000      /* internal SRAM        */
35
36 #define CONFIG_SYS_PCI_BASE             0xd0000000      /* internal PCI regs    */
37
38 #define CONFIG_SYS_PCIE_MEMBASE 0x90000000      /* mapped PCIe memory   */
39 #define CONFIG_SYS_PCIE0_MEMBASE        0x90000000      /* mapped PCIe memory   */
40 #define CONFIG_SYS_PCIE1_MEMBASE        0xa0000000      /* mapped PCIe memory   */
41 #define CONFIG_SYS_PCIE_MEMSIZE 0x01000000
42
43 #define CONFIG_SYS_PCIE0_XCFGBASE       0xb0000000
44 #define CONFIG_SYS_PCIE1_XCFGBASE       0xb2000000
45 #define CONFIG_SYS_PCIE2_XCFGBASE       0xb4000000
46 #define CONFIG_SYS_PCIE0_CFGBASE        0xb6000000
47 #define CONFIG_SYS_PCIE1_CFGBASE        0xb8000000
48 #define CONFIG_SYS_PCIE2_CFGBASE        0xba000000
49
50 /* PCIe mapped UTL registers */
51 #define CONFIG_SYS_PCIE0_REGBASE   0xd0000000
52 #define CONFIG_SYS_PCIE1_REGBASE   0xd0010000
53 #define CONFIG_SYS_PCIE2_REGBASE   0xd0020000
54
55 /* System RAM mapped to PCI space */
56 #define CONFIG_PCI_SYS_MEM_BUS  CONFIG_SYS_SDRAM_BASE
57 #define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
58 #define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
59
60 #define CONFIG_SYS_FPGA_BASE            0xe2000000      /* epld                 */
61 #define CONFIG_SYS_OPER_FLASH           0xe7000000      /* SRAM - OPER Flash    */
62
63 /*
64  * Serial Port
65  */
66 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
67
68 /*-----------------------------------------------------------------------
69  * Initial RAM & stack pointer (placed in internal SRAM)
70  *----------------------------------------------------------------------*/
71 #define CONFIG_SYS_TEMP_STACK_OCM       1
72 #define CONFIG_SYS_OCM_DATA_ADDR        CONFIG_SYS_ISRAM_BASE
73 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_ISRAM_BASE   /* Initial RAM address  */
74 #define CONFIG_SYS_INIT_RAM_SIZE        0x2000          /* Size of used area in RAM */
75
76 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
77 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
78
79 /*-----------------------------------------------------------------------
80  * DDR SDRAM
81  *----------------------------------------------------------------------*/
82 #define CONFIG_SPD_EEPROM       1       /* Use SPD EEPROM for setup     */
83 #define CONFIG_DDR_ECC          1       /* with ECC support             */
84
85 #define CONFIG_SYS_SPD_MAX_DIMMS        2
86
87 /* SPD i2c spd addresses */
88 #define SPD_EEPROM_ADDRESS     {IIC0_DIMM0_ADDR, IIC0_DIMM1_ADDR}
89 #define IIC0_DIMM0_ADDR                0x53
90 #define IIC0_DIMM1_ADDR                0x52
91
92 /*-----------------------------------------------------------------------
93  * I2C
94  *----------------------------------------------------------------------*/
95 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           400000
96
97 #define IIC0_BOOTPROM_ADDR      0x50
98 #define IIC0_ALT_BOOTPROM_ADDR  0x54
99
100 /* Don't probe these addrs */
101 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x50}, {0, 0x52}, {0, 0x53}, {0, 0x54} }
102
103 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2       /* Bytes of address             */
104
105 /*-----------------------------------------------------------------------
106  * Environment
107  *----------------------------------------------------------------------*/
108 #undef  CONFIG_ENV_IS_IN_NVRAM          /* ... not in NVRAM             */
109 #define CONFIG_ENV_IS_IN_FLASH  1       /* Environment uses flash       */
110 #undef  CONFIG_ENV_IS_IN_EEPROM         /* ... not in EEPROM            */
111
112 #define CONFIG_PREBOOT  "echo;" \
113         "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
114         "echo"
115
116 #undef  CONFIG_BOOTARGS
117
118 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
119         CONFIG_AMCC_DEF_ENV                                             \
120         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
121         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
122         "kernel_addr=fc000000\0"                                        \
123         "fdt_addr=fc1e0000\0"                                           \
124         "ramdisk_addr=fc200000\0"                                       \
125         ""
126
127 /*----------------------------------------------------------------------------+
128 | Commands in addition to amcc-common.h
129 +----------------------------------------------------------------------------*/
130 #define CONFIG_CMD_SDRAM
131
132 #define CONFIG_BOOTCOMMAND      "run flash_self"
133
134
135 #define CONFIG_IBM_EMAC4_V4     1
136 #define CONFIG_PHY_RESET        1       /* reset phy upon startup       */
137 #define CONFIG_PHY_RESET_DELAY  1000
138 #define CONFIG_M88E1141_PHY     1       /* Enable phy */
139 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
140
141 #define CONFIG_HAS_ETH0
142 #define CONFIG_HAS_ETH1
143 #define CONFIG_PHY_ADDR         0       /* PHY address, See schematics  */
144 #define CONFIG_PHY1_ADDR        1       /* PHY address, See schematics  */
145
146 #undef CONFIG_WATCHDOG                  /* watchdog disabled            */
147
148 /*-----------------------------------------------------------------------
149  * FLASH related
150  *----------------------------------------------------------------------*/
151 #define CONFIG_SYS_FLASH_CFI                    /* The flash is CFI compatible  */
152 #define CONFIG_FLASH_CFI_DRIVER         /* Use common CFI driver        */
153 #define CONFIG_SYS_FLASH_CFI_AMD_RESET 1        /* Use AMD (Spansion) reset cmd */
154
155 #define CONFIG_SYS_MAX_FLASH_BANKS      3       /* number of banks              */
156 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* sectors per device           */
157
158 #undef  CONFIG_SYS_FLASH_CHECKSUM
159 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms) */
160 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms) */
161
162 #ifdef CONFIG_ENV_IS_IN_FLASH
163 #define CONFIG_ENV_SECT_SIZE    0x10000 /* size of one complete sector  */
164 #define CONFIG_ENV_ADDR         0xfffa0000
165 #define CONFIG_ENV_SIZE         0x10000 /* Size of Environment vars     */
166 #endif /* CONFIG_ENV_IS_IN_FLASH */
167
168 /*---------------------------------------------------------------------------*/
169
170 #endif  /* __CONFIG_H */