include/configs/rastaban.h

   1 /*
   2  * (C) Copyright 2013 Siemens Schweiz AG
   3  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4  *
   5  * Based on:
   6  * U-Boot file:/include/configs/am335x_evm.h
   7  *
   8  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_RASTABAN_H
  14 #define __CONFIG_RASTABAN_H
  15
  16 #include "siemens-am33x-common.h"
  17
  18 #define CONFIG_SYS_MPUCLK       300
  19 #define DDR_PLL_FREQ    303
  20 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
  21
  22 /* FWD Button = 27
  23  * SRV Button = 87 */
  24 #define BOARD_DFU_BUTTON_GPIO   27
  25 #define GPIO_LAN9303_NRST       88      /* GPIO2_24 = gpio88 */
  26 /* In dfu mode keep led1 on */
  27 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  28         "button_dfu0=27\0" \
  29         "button_dfu1=87\0" \
  30         "led0=3,0,1\0" \
  31         "led1=4,0,0\0" \
  32         "led2=5,0,1\0" \
  33         "led3=62,0,1\0" \
  34         "led4=60,0,1\0" \
  35         "led5=63,0,1\0"
  36
  37 #undef CONFIG_DOS_PARTITION
  38
  39 #define CONFIG_BOARD_LATE_INIT
  40
  41  /* Physical Memory Map */
  42 #define CONFIG_MAX_RAM_BANK_SIZE        (1024 << 20)    /* 1GB */
  43
  44 /* I2C Configuration */
  45 #define CONFIG_SYS_I2C_SPEED            100000
  46
  47 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
  48 #define EEPROM_ADDR_DDR3 0x90
  49 #define EEPROM_ADDR_CHIP 0x120
  50
  51 #undef CONFIG_MII
  52 #undef CONFIG_PHY_GIGE
  53 #define CONFIG_PHY_SMSC
  54
  55 #define CONFIG_FACTORYSET
  56
  57 /* Watchdog */
  58 #define CONFIG_OMAP_WATCHDOG
  59
  60 /* Define own nand partitions */
  61 #define CONFIG_ENV_OFFSET_REDUND        0x2E0000
  62 #define CONFIG_ENV_SIZE_REDUND          0x2000
  63 #define CONFIG_ENV_RANGE                (4 * CONFIG_SYS_ENV_SECT_SIZE)
  64
  65 #define MTDPARTS_DEFAULT        MTDPARTS_DEFAULT_V3
  66
  67 #ifndef CONFIG_SPL_BUILD
  68
  69 /* Default env settings */
  70 #define CONFIG_EXTRA_ENV_SETTINGS \
  71         "hostname=rastaban\0" \
  72         "ubi_off=2048\0"\
  73         "nand_img_size=0x400000\0" \
  74         "optargs=\0" \
  75         "preboot=draco_led 0\0" \
  76         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  77         CONFIG_ENV_SETTINGS_V2 \
  78         CONFIG_ENV_SETTINGS_NAND_V2
  79
  80 #ifndef CONFIG_RESTORE_FLASH
  81 /* set to negative value for no autoboot */
  82
  83 #define CONFIG_BOOTCOMMAND \
  84 "if dfubutton; then " \
  85         "run dfu_start; " \
  86         "reset; " \
  87 "fi;" \
  88 "run nand_boot;" \
  89 "run nand_boot_backup;" \
  90 "reset;"
  91
  92 #else
  93
  94 #define CONFIG_BOOTCOMMAND                      \
  95         "setenv autoload no; "                  \
  96         "dhcp; "                                \
  97         "if tftp 80000000 debrick.scr; then "   \
  98                 "source 80000000; "             \
  99         "fi"
 100 #endif
 101 #endif  /* CONFIG_SPL_BUILD */
 102 #endif  /* ! __CONFIG_RASTABAN_H */