include/configs/rastaban.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2013 Siemens Schweiz AG
   4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * U-Boot file:/include/configs/am335x_evm.h
   8  *
   9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  10  */
  11
  12 #ifndef __CONFIG_RASTABAN_H
  13 #define __CONFIG_RASTABAN_H
  14
  15 #include "siemens-am33x-common.h"
  16
  17 #define DDR_PLL_FREQ    303
  18
  19 /* FWD Button = 27
  20  * SRV Button = 87 */
  21 #define BOARD_DFU_BUTTON_GPIO   27
  22 #define GPIO_LAN9303_NRST       88      /* GPIO2_24 = gpio88 */
  23 /* In dfu mode keep led1 on */
  24 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  25         "button_dfu0=27\0" \
  26         "button_dfu1=87\0" \
  27         "led0=3,0,1\0" \
  28         "led1=4,0,0\0" \
  29         "led2=5,0,1\0" \
  30         "led3=62,0,1\0" \
  31         "led4=60,0,1\0" \
  32         "led5=63,0,1\0"
  33
  34  /* Physical Memory Map */
  35 #define CONFIG_MAX_RAM_BANK_SIZE        (1024 << 20)    /* 1GB */
  36
  37 /* I2C Configuration */
  38 #define CONFIG_SYS_I2C_SPEED            100000
  39
  40 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
  41 #define EEPROM_ADDR_DDR3 0x90
  42 #define EEPROM_ADDR_CHIP 0x120
  43
  44 #define CONFIG_PHY_SMSC
  45
  46 #define CONFIG_FACTORYSET
  47
  48 /* Define own nand partitions */
  49 #define CONFIG_ENV_OFFSET_REDUND        0x2E0000
  50 #define CONFIG_ENV_SIZE_REDUND          0x2000
  51 #define CONFIG_ENV_RANGE                (4 * CONFIG_SYS_ENV_SECT_SIZE)
  52
  53 #ifndef CONFIG_SPL_BUILD
  54
  55 /* Default env settings */
  56 #define CONFIG_EXTRA_ENV_SETTINGS \
  57         "hostname=rastaban\0" \
  58         "ubi_off=2048\0"\
  59         "nand_img_size=0x400000\0" \
  60         "optargs=\0" \
  61         "preboot=draco_led 0\0" \
  62         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  63         CONFIG_ENV_SETTINGS_V2 \
  64         CONFIG_ENV_SETTINGS_NAND_V2
  65
  66 #ifndef CONFIG_RESTORE_FLASH
  67 /* set to negative value for no autoboot */
  68
  69 #define CONFIG_BOOTCOMMAND \
  70 "if dfubutton; then " \
  71         "run dfu_start; " \
  72         "reset; " \
  73 "fi;" \
  74 "run nand_boot;" \
  75 "run nand_boot_backup;" \
  76 "reset;"
  77
  78 #else
  79
  80 #define CONFIG_BOOTCOMMAND                      \
  81         "setenv autoload no; "                  \
  82         "dhcp; "                                \
  83         "if tftp 80000000 debrick.scr; then "   \
  84                 "source 80000000; "             \
  85         "fi"
  86 #endif
  87 #endif  /* CONFIG_SPL_BUILD */
  88 #endif  /* ! __CONFIG_RASTABAN_H */