3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * SPDX-License-Identifier: GPL-2.0+
9 * This file contains the configuration parameters for qemu-mips64 target.
15 #define CONFIG_QEMU_MIPS
17 #define CONFIG_DISPLAY_BOARDINFO
18 #define CONFIG_MISC_INIT_R
20 #define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
22 #define CONFIG_BAUDRATE 115200
24 #define CONFIG_TIMESTAMP /* Print image info with timestamp */
25 #undef CONFIG_BOOTARGS
27 #define CONFIG_EXTRA_ENV_SETTINGS \
28 "addmisc=setenv bootargs ${bootargs} " \
29 "console=ttyS0,${baudrate} " \
31 "bootfile=/tftpboot/vmlinux\0" \
32 "load=tftp ffffffff80500000 ${u-boot}\0" \
35 #define CONFIG_BOOTCOMMAND "bootp;bootelf"
40 #define CONFIG_BOOTP_BOOTFILESIZE
41 #define CONFIG_BOOTP_BOOTPATH
42 #define CONFIG_BOOTP_GATEWAY
43 #define CONFIG_BOOTP_HOSTNAME
46 * Command line configuration.
49 #define CONFIG_DRIVER_NE2000
50 #define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300
52 #define CONFIG_SYS_NS16550_SERIAL
53 #define CONFIG_SYS_NS16550_REG_SIZE 1
54 #define CONFIG_SYS_NS16550_CLK 115200
55 #define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8
56 #define CONFIG_CONS_INDEX 1
58 #define CONFIG_CMD_IDE
59 #define CONFIG_DOS_PARTITION
61 #ifdef CONFIG_SYS_BIG_ENDIAN
62 #define CONFIG_IDE_SWAP_IO
65 #define CONFIG_SYS_IDE_MAXBUS 2
66 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
67 #define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
68 #define CONFIG_SYS_ATA_DATA_OFFSET 0
69 #define CONFIG_SYS_ATA_REG_OFFSET 0
70 #define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000
72 #define CONFIG_SYS_IDE_MAXDEVICE 4
75 * Miscellaneous configurable options
77 #define CONFIG_SYS_LONGHELP /* undef to save memory */
79 #define CONFIG_AUTO_COMPLETE
80 #define CONFIG_CMDLINE_EDITING
82 /* Console I/O Buffer Size */
83 #define CONFIG_SYS_CBSIZE 256
84 /* Print Buffer Size */
85 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
86 /* max number of command args */
87 #define CONFIG_SYS_MAXARGS 16
89 #define CONFIG_SYS_MALLOC_LEN 128*1024
91 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
93 #define CONFIG_SYS_MHZ 132
95 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
98 #define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000
100 /* default load address */
101 #define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000
103 #define CONFIG_SYS_MEMTEST_START 0xffffffff80100000
104 #define CONFIG_SYS_MEMTEST_END 0xffffffff80800000
106 /*-----------------------------------------------------------------------
107 * FLASH and environment organization
109 /* The following #defines are needed to get flash environment right */
110 #define CONFIG_SYS_TEXT_BASE 0xffffffffbfc00000 /* Rom version */
111 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
112 #define CONFIG_SYS_MONITOR_LEN (192 << 10)
114 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000
116 /* We boot from this flash, selected with dip switch */
117 #define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000
118 #define CONFIG_SYS_MAX_FLASH_BANKS 1
119 #define CONFIG_SYS_MAX_FLASH_SECT 128
120 #define CONFIG_SYS_FLASH_CFI
121 #define CONFIG_FLASH_CFI_DRIVER
122 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
124 #define CONFIG_ENV_IS_IN_FLASH
125 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
127 /* Address and size of Primary Environment Sector */
128 #define CONFIG_ENV_SIZE 0x8000
130 #define CONFIG_ENV_OVERWRITE 1
136 /*-----------------------------------------------------------------------
137 * Cache Configuration
139 #define CONFIG_SYS_DCACHE_SIZE 16384
140 #define CONFIG_SYS_ICACHE_SIZE 16384
141 #define CONFIG_SYS_CACHELINE_SIZE 32
143 #endif /* __CONFIG_H */