3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * SPDX-License-Identifier: GPL-2.0+
9 * This file contains the configuration parameters for qemu-mips target.
15 #define CONFIG_QEMU_MIPS
17 #define CONFIG_MISC_INIT_R
19 #define CONFIG_TIMESTAMP /* Print image info with timestamp */
20 #undef CONFIG_BOOTARGS
22 #define CONFIG_EXTRA_ENV_SETTINGS \
23 "addmisc=setenv bootargs ${bootargs} " \
24 "console=ttyS0,${baudrate} " \
26 "bootfile=/tftpboot/vmlinux\0" \
27 "load=tftp 80500000 ${u-boot}\0" \
30 #define CONFIG_BOOTCOMMAND "bootp;bootelf"
35 #define CONFIG_BOOTP_BOOTFILESIZE
36 #define CONFIG_BOOTP_BOOTPATH
37 #define CONFIG_BOOTP_GATEWAY
38 #define CONFIG_BOOTP_HOSTNAME
41 * Command line configuration.
44 #define CONFIG_DRIVER_NE2000
45 #define CONFIG_DRIVER_NE2000_BASE 0xb4000300
47 #define CONFIG_SYS_NS16550_SERIAL
48 #define CONFIG_SYS_NS16550_REG_SIZE 1
49 #define CONFIG_SYS_NS16550_CLK 115200
50 #define CONFIG_SYS_NS16550_COM1 0xb40003f8
51 #define CONFIG_CONS_INDEX 1
53 #define CONFIG_CMD_IDE
55 #ifdef CONFIG_SYS_BIG_ENDIAN
56 #define CONFIG_IDE_SWAP_IO
59 #define CONFIG_SYS_IDE_MAXBUS 2
60 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
61 #define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
62 #define CONFIG_SYS_ATA_DATA_OFFSET 0
63 #define CONFIG_SYS_ATA_REG_OFFSET 0
64 #define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000
66 #define CONFIG_SYS_IDE_MAXDEVICE 4
69 * Miscellaneous configurable options
71 #define CONFIG_SYS_LONGHELP /* undef to save memory */
73 #define CONFIG_AUTO_COMPLETE
74 #define CONFIG_CMDLINE_EDITING
76 /* Console I/O Buffer Size */
77 #define CONFIG_SYS_CBSIZE 256
78 /* Print Buffer Size */
79 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
80 /* max number of command args */
81 #define CONFIG_SYS_MAXARGS 16
83 #define CONFIG_SYS_MALLOC_LEN 128*1024
85 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
87 #define CONFIG_SYS_MHZ 132
89 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
92 #define CONFIG_SYS_SDRAM_BASE 0x80000000
94 /* default load address */
95 #define CONFIG_SYS_LOAD_ADDR 0x81000000
97 #define CONFIG_SYS_MEMTEST_START 0x80100000
98 #define CONFIG_SYS_MEMTEST_END 0x80800000
100 /*-----------------------------------------------------------------------
101 * FLASH and environment organization
103 /* The following #defines are needed to get flash environment right */
104 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
106 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000
108 /* We boot from this flash, selected with dip switch */
109 #define CONFIG_SYS_FLASH_BASE 0xbfc00000
110 #define CONFIG_SYS_MAX_FLASH_BANKS 1
111 #define CONFIG_SYS_MAX_FLASH_SECT 128
112 #define CONFIG_SYS_FLASH_CFI
113 #define CONFIG_FLASH_CFI_DRIVER
114 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
116 #define CONFIG_ENV_IS_IN_FLASH
118 /* Address and size of Primary Environment Sector */
119 #define CONFIG_ENV_SIZE 0x8000
120 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
122 #define CONFIG_ENV_OVERWRITE 1
128 #endif /* __CONFIG_H */