Merge branch 'master' of git://git.denx.de/u-boot-mmc
[platform/kernel/u-boot.git] / include / configs / pxm2.h
1 /*
2  * siemens pxm2
3  * (C) Copyright 2013 Siemens Schweiz AG
4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  *
6  * Based on:
7  * U-Boot file:/include/configs/am335x_evm.h
8  *
9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10  *
11  * SPDX-License-Identifier:     GPL-2.0+
12  */
13
14 #ifndef __CONFIG_PXM2_H
15 #define __CONFIG_PXM2_H
16
17 #define CONFIG_SIEMENS_PXM2
18 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_PXM2
19
20 #include "siemens-am33x-common.h"
21
22 #define DDR_IOCTRL_VAL          0x18b
23 #define DDR_PLL_FREQ            266
24
25 #define BOARD_DFU_BUTTON_GPIO   59
26 #define BOARD_LCD_POWER         111
27 #define BOARD_BACK_LIGHT        112
28 #define BOARD_TOUCH_POWER       57
29
30 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
31         "button_dfu0=59\0" \
32         "led0=117,0,1\0" \
33
34  /* Physical Memory Map */
35 #define CONFIG_MAX_RAM_BANK_SIZE        (512 << 20)     /* 1GB */
36
37 /* I2C Configuration */
38 #define CONFIG_SYS_I2C_SPEED            400000
39 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
40
41 #define CONFIG_PHY_ATHEROS
42
43 #define CONFIG_FACTORYSET
44
45 #ifndef CONFIG_SPL_BUILD
46
47 /* Use common default */
48 #define MTDPARTS_DEFAULT        MTDPARTS_DEFAULT_V1
49
50 /* Default env settings */
51 #define CONFIG_EXTRA_ENV_SETTINGS \
52         "hostname=pxm2\0" \
53         "ubi_off=2048\0"\
54         "nand_img_size=0x500000\0" \
55         "optargs=\0" \
56         "preboot=draco_led 0\0" \
57         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
58         "splashpos=m,m\0"       \
59         CONFIG_ENV_SETTINGS_V1 \
60         CONFIG_ENV_SETTINGS_NAND_V1 \
61         "mmc_dev=0\0" \
62         "mmc_root=/dev/mmcblk0p2 rw\0" \
63         "mmc_root_fs_type=ext4 rootwait\0" \
64         "mmc_load_uimage=" \
65                 "mmc rescan; " \
66                 "setenv bootfile uImage;" \
67                 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
68         "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
69         "importbootenv=echo Importing environment from mmc ...; " \
70                 "env import -t $loadaddr $filesize\0" \
71         "mmc_args=run bootargs_defaults;" \
72                 "mtdparts default;" \
73                 "setenv bootargs ${bootargs} " \
74                 "root=${mmc_root} ${mtdparts}" \
75                 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
76                 "eth=${ethaddr} " \
77                 "\0" \
78         "mmc_boot=run mmc_args; " \
79                 "run mmc_load_uimage; " \
80                 "bootm ${kloadaddr}\0" \
81         ""
82
83 #ifndef CONFIG_RESTORE_FLASH
84 /* set to negative value for no autoboot */
85
86 #define CONFIG_BOOTCOMMAND \
87         "if dfubutton; then " \
88                 "run dfu_start; " \
89                 "reset; " \
90         "fi; " \
91         "if mmc rescan; then " \
92                 "echo SD/MMC found on device ${mmc_dev};" \
93                 "if run loadbootenv; then " \
94                         "echo Loaded environment from ${bootenv};" \
95                         "run importbootenv;" \
96                 "fi;" \
97                 "if test -n $uenvcmd; then " \
98                         "echo Running uenvcmd ...;" \
99                         "run uenvcmd;" \
100                 "fi;" \
101                 "if run mmc_load_uimage; then " \
102                         "run mmc_args;" \
103                         "bootm ${kloadaddr};" \
104                 "fi;" \
105         "fi;" \
106         "run nand_boot;" \
107         "reset;"
108
109 #else
110
111 #define CONFIG_BOOTCOMMAND                      \
112         "setenv autoload no; "                  \
113         "dhcp; "                                \
114         "if tftp 80000000 debrick.scr; then "   \
115                 "source 80000000; "             \
116         "fi"
117 #endif
118 #endif  /* CONFIG_SPL_BUILD */
119
120 #if defined(CONFIG_VIDEO)
121 #define CONFIG_VIDEO_DA8XX
122 #define CONFIG_SPLASH_SCREEN
123 #define CONFIG_SPLASH_SCREEN_ALIGN
124 #define CONFIG_VIDEO_LOGO
125 #define CONFIG_VIDEO_BMP_RLE8
126 #define CONFIG_VIDEO_BMP_LOGO
127 #define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
128 #define PWM_TICKS       0x1388
129 #define PWM_DUTY        0x200
130 #endif
131
132 #endif  /* ! __CONFIG_PXM2_H */