include/configs/pxm2.h

   1 /*
   2  * siemens pxm2
   3  * (C) Copyright 2013 Siemens Schweiz AG
   4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * U-Boot file:/include/configs/am335x_evm.h
   8  *
   9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef __CONFIG_PXM2_H
  15 #define __CONFIG_PXM2_H
  16
  17 #define CONFIG_SIEMENS_PXM2
  18 #define MACH_TYPE_PXM2                  4309
  19 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_PXM2
  20
  21 #include "siemens-am33x-common.h"
  22
  23 #define CONFIG_SYS_MPUCLK       720
  24 #define DDR_IOCTRL_VAL          0x18b
  25 #define DDR_PLL_FREQ            266
  26
  27 #define BOARD_DFU_BUTTON_GPIO   59
  28 #define BOARD_LCD_POWER         111
  29 #define BOARD_BACK_LIGHT        112
  30 #define BOARD_TOUCH_POWER       57
  31
  32 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  33         "button_dfu0=59\0" \
  34         "led0=117,0,1\0" \
  35
  36  /* Physical Memory Map */
  37 #define CONFIG_MAX_RAM_BANK_SIZE        (512 << 20)     /* 1GB */
  38
  39 /* I2C Configuration */
  40 #define CONFIG_SYS_I2C_SPEED            400000
  41 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
  42
  43
  44 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x300
  45
  46 #undef CONFIG_SPL_NET_SUPPORT
  47 #undef CONFIG_SPL_NET_VCI_STRING
  48 #undef CONFIG_SPL_ETH_SUPPORT
  49
  50 #define CONFIG_PHY_ATHEROS
  51
  52 #define CONFIG_FACTORYSET
  53
  54
  55 /* Watchdog */
  56 #define CONFIG_OMAP_WATCHDOG
  57
  58 #ifndef CONFIG_SPL_BUILD
  59
  60 /* Use common default */
  61 #define MTDPARTS_DEFAULT        MTDPARTS_DEFAULT_V1
  62
  63 /* Default env settings */
  64 #define CONFIG_EXTRA_ENV_SETTINGS \
  65         "hostname=pxm2\0" \
  66         "nand_img_size=0x500000\0" \
  67         "optargs=\0" \
  68         "preboot=draco_led 0\0" \
  69         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  70         "splashpos=m,m\0"       \
  71         CONFIG_ENV_SETTINGS_V1 \
  72         CONFIG_ENV_SETTINGS_NAND_V1 \
  73         "mmc_dev=0\0" \
  74         "mmc_root=/dev/mmcblk0p2 rw\0" \
  75         "mmc_root_fs_type=ext4 rootwait\0" \
  76         "mmc_load_uimage=" \
  77                 "mmc rescan; " \
  78                 "setenv bootfile uImage;" \
  79                 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
  80         "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
  81         "importbootenv=echo Importing environment from mmc ...; " \
  82                 "env import -t $loadaddr $filesize\0" \
  83         "mmc_args=run bootargs_defaults;" \
  84                 "mtdparts default;" \
  85                 "setenv bootargs ${bootargs} " \
  86                 "root=${mmc_root} ${mtdparts}" \
  87                 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
  88                 "eth=${ethaddr} " \
  89                 "\0" \
  90         "mmc_boot=run mmc_args; " \
  91                 "run mmc_load_uimage; " \
  92                 "bootm ${kloadaddr}\0" \
  93         ""
  94
  95 #ifndef CONFIG_RESTORE_FLASH
  96 /* set to negative value for no autoboot */
  97 #define CONFIG_BOOTDELAY                3
  98
  99 #define CONFIG_BOOTCOMMAND \
 100         "if dfubutton; then " \
 101                 "run dfu_start; " \
 102                 "reset; " \
 103         "fi; " \
 104         "if mmc rescan; then " \
 105                 "echo SD/MMC found on device ${mmc_dev};" \
 106                 "if run loadbootenv; then " \
 107                         "echo Loaded environment from ${bootenv};" \
 108                         "run importbootenv;" \
 109                 "fi;" \
 110                 "if test -n $uenvcmd; then " \
 111                         "echo Running uenvcmd ...;" \
 112                         "run uenvcmd;" \
 113                 "fi;" \
 114                 "if run mmc_load_uimage; then " \
 115                         "run mmc_args;" \
 116                         "bootm ${kloadaddr};" \
 117                 "fi;" \
 118         "fi;" \
 119         "run nand_boot;" \
 120         "reset;"
 121
 122 #else
 123 #define CONFIG_BOOTDELAY                0
 124
 125 #define CONFIG_BOOTCOMMAND                      \
 126         "setenv autoload no; "                  \
 127         "dhcp; "                                \
 128         "if tftp 80000000 debrick.scr; then "   \
 129                 "source 80000000; "             \
 130         "fi"
 131 #endif
 132 #endif  /* CONFIG_SPL_BUILD */
 133
 134 #define CONFIG_VIDEO
 135 #if defined(CONFIG_VIDEO)
 136 #define CONFIG_VIDEO_DA8XX
 137 #define CONFIG_CFB_CONSOLE
 138 #define CONFIG_VGA_AS_SINGLE_DEVICE
 139 #define CONFIG_SPLASH_SCREEN
 140 #define CONFIG_SPLASH_SCREEN_ALIGN
 141 #define CONFIG_VIDEO_LOGO
 142 #define CONFIG_VIDEO_BMP_RLE8
 143 #define CONFIG_VIDEO_BMP_LOGO
 144 #define CONFIG_CMD_BMP
 145 #define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
 146 #define PWM_TICKS       0x1388
 147 #define PWM_DUTY        0x200
 148 #define CONFIG_SYS_CONSOLE_BG_COL       0xff
 149 #define CONFIG_SYS_CONSOLE_FG_COL       0x00
 150 #endif
 151
 152 #ifndef CONFIG_SPL_BUILD
 153 #define CONFIG_FIT
 154 #endif
 155
 156 #endif  /* ! __CONFIG_PXM2_H */