Merge branch 'master' of git://git.denx.de/u-boot-socfpga
[platform/kernel/u-boot.git] / include / configs / pxm2.h
1 /*
2  * siemens pxm2
3  * (C) Copyright 2013 Siemens Schweiz AG
4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  *
6  * Based on:
7  * U-Boot file:/include/configs/am335x_evm.h
8  *
9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10  *
11  * SPDX-License-Identifier:     GPL-2.0+
12  */
13
14 #ifndef __CONFIG_PXM2_H
15 #define __CONFIG_PXM2_H
16
17 #define CONFIG_SIEMENS_PXM2
18 #define MACH_TYPE_PXM2                  4309
19 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_PXM2
20
21 #include "siemens-am33x-common.h"
22
23 #define CONFIG_SYS_MPUCLK       720
24 #define DDR_IOCTRL_VAL          0x18b
25 #define DDR_PLL_FREQ            266
26
27 #define BOARD_DFU_BUTTON_GPIO   59
28 #define BOARD_LCD_POWER         111
29 #define BOARD_BACK_LIGHT        112
30 #define BOARD_TOUCH_POWER       57
31
32 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
33         "button_dfu0=59\0" \
34         "led0=117,0,1\0" \
35
36  /* Physical Memory Map */
37 #define CONFIG_MAX_RAM_BANK_SIZE        (512 << 20)     /* 1GB */
38
39 /* I2C Configuration */
40 #define CONFIG_SYS_I2C_SPEED            400000
41 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
42
43 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x300
44
45 #undef CONFIG_SPL_NET_SUPPORT
46 #undef CONFIG_SPL_NET_VCI_STRING
47 #undef CONFIG_SPL_ETH_SUPPORT
48
49 #define CONFIG_PHY_ATHEROS
50
51 #define CONFIG_FACTORYSET
52
53 /* Watchdog */
54 #define CONFIG_OMAP_WATCHDOG
55
56 #ifndef CONFIG_SPL_BUILD
57
58 /* Use common default */
59 #define MTDPARTS_DEFAULT        MTDPARTS_DEFAULT_V1
60
61 /* Default env settings */
62 #define CONFIG_EXTRA_ENV_SETTINGS \
63         "hostname=pxm2\0" \
64         "ubi_off=2048\0"\
65         "nand_img_size=0x500000\0" \
66         "optargs=\0" \
67         "preboot=draco_led 0\0" \
68         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
69         "splashpos=m,m\0"       \
70         CONFIG_ENV_SETTINGS_V1 \
71         CONFIG_ENV_SETTINGS_NAND_V1 \
72         "mmc_dev=0\0" \
73         "mmc_root=/dev/mmcblk0p2 rw\0" \
74         "mmc_root_fs_type=ext4 rootwait\0" \
75         "mmc_load_uimage=" \
76                 "mmc rescan; " \
77                 "setenv bootfile uImage;" \
78                 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
79         "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
80         "importbootenv=echo Importing environment from mmc ...; " \
81                 "env import -t $loadaddr $filesize\0" \
82         "mmc_args=run bootargs_defaults;" \
83                 "mtdparts default;" \
84                 "setenv bootargs ${bootargs} " \
85                 "root=${mmc_root} ${mtdparts}" \
86                 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
87                 "eth=${ethaddr} " \
88                 "\0" \
89         "mmc_boot=run mmc_args; " \
90                 "run mmc_load_uimage; " \
91                 "bootm ${kloadaddr}\0" \
92         ""
93
94 #ifndef CONFIG_RESTORE_FLASH
95 /* set to negative value for no autoboot */
96
97 #define CONFIG_BOOTCOMMAND \
98         "if dfubutton; then " \
99                 "run dfu_start; " \
100                 "reset; " \
101         "fi; " \
102         "if mmc rescan; then " \
103                 "echo SD/MMC found on device ${mmc_dev};" \
104                 "if run loadbootenv; then " \
105                         "echo Loaded environment from ${bootenv};" \
106                         "run importbootenv;" \
107                 "fi;" \
108                 "if test -n $uenvcmd; then " \
109                         "echo Running uenvcmd ...;" \
110                         "run uenvcmd;" \
111                 "fi;" \
112                 "if run mmc_load_uimage; then " \
113                         "run mmc_args;" \
114                         "bootm ${kloadaddr};" \
115                 "fi;" \
116         "fi;" \
117         "run nand_boot;" \
118         "reset;"
119
120 #else
121
122 #define CONFIG_BOOTCOMMAND                      \
123         "setenv autoload no; "                  \
124         "dhcp; "                                \
125         "if tftp 80000000 debrick.scr; then "   \
126                 "source 80000000; "             \
127         "fi"
128 #endif
129 #endif  /* CONFIG_SPL_BUILD */
130
131 #define CONFIG_VIDEO
132 #if defined(CONFIG_VIDEO)
133 #define CONFIG_VIDEO_DA8XX
134 #define CONFIG_CFB_CONSOLE
135 #define CONFIG_VGA_AS_SINGLE_DEVICE
136 #define CONFIG_SPLASH_SCREEN
137 #define CONFIG_SPLASH_SCREEN_ALIGN
138 #define CONFIG_VIDEO_LOGO
139 #define CONFIG_VIDEO_BMP_RLE8
140 #define CONFIG_VIDEO_BMP_LOGO
141 #define CONFIG_CMD_BMP
142 #define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
143 #define PWM_TICKS       0x1388
144 #define PWM_DUTY        0x200
145 #define CONFIG_SYS_CONSOLE_BG_COL       0xff
146 #define CONFIG_SYS_CONSOLE_FG_COL       0x00
147 #endif
148
149 #endif  /* ! __CONFIG_PXM2_H */