Merge branch 'master' of git://git.denx.de/u-boot-sh
[platform/kernel/u-boot.git] / include / configs / pxm2.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * siemens pxm2
4  * (C) Copyright 2013 Siemens Schweiz AG
5  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
6  *
7  * Based on:
8  * U-Boot file:/include/configs/am335x_evm.h
9  *
10  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
11  */
12
13 #ifndef __CONFIG_PXM2_H
14 #define __CONFIG_PXM2_H
15
16 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_PXM2
17
18 #include "siemens-am33x-common.h"
19
20 #define DDR_IOCTRL_VAL          0x18b
21 #define DDR_PLL_FREQ            266
22
23 #define BOARD_DFU_BUTTON_GPIO   59
24 #define BOARD_LCD_POWER         111
25 #define BOARD_BACK_LIGHT        112
26 #define BOARD_TOUCH_POWER       57
27
28 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
29         "button_dfu0=59\0" \
30         "led0=117,0,1\0" \
31
32  /* Physical Memory Map */
33 #define CONFIG_MAX_RAM_BANK_SIZE        (512 << 20)     /* 1GB */
34
35 /* I2C Configuration */
36 #define CONFIG_SYS_I2C_SPEED            400000
37 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
38
39 #define CONFIG_PHY_ATHEROS
40
41 #define CONFIG_FACTORYSET
42
43 #ifndef CONFIG_SPL_BUILD
44
45 /* Use common default */
46
47 /* Default env settings */
48 #define CONFIG_EXTRA_ENV_SETTINGS \
49         "hostname=pxm2\0" \
50         "ubi_off=2048\0"\
51         "nand_img_size=0x500000\0" \
52         "optargs=\0" \
53         "preboot=draco_led 0\0" \
54         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
55         "splashpos=m,m\0"       \
56         CONFIG_ENV_SETTINGS_V1 \
57         CONFIG_ENV_SETTINGS_NAND_V1 \
58         "mmc_dev=0\0" \
59         "mmc_root=/dev/mmcblk0p2 rw\0" \
60         "mmc_root_fs_type=ext4 rootwait\0" \
61         "mmc_load_uimage=" \
62                 "mmc rescan; " \
63                 "setenv bootfile uImage;" \
64                 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
65         "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
66         "importbootenv=echo Importing environment from mmc ...; " \
67                 "env import -t $loadaddr $filesize\0" \
68         "mmc_args=run bootargs_defaults;" \
69                 "mtdparts default;" \
70                 "setenv bootargs ${bootargs} " \
71                 "root=${mmc_root} ${mtdparts}" \
72                 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
73                 "eth=${ethaddr} " \
74                 "\0" \
75         "mmc_boot=run mmc_args; " \
76                 "run mmc_load_uimage; " \
77                 "bootm ${kloadaddr}\0" \
78         ""
79
80 #ifndef CONFIG_RESTORE_FLASH
81 /* set to negative value for no autoboot */
82
83 #define CONFIG_BOOTCOMMAND \
84         "if dfubutton; then " \
85                 "run dfu_start; " \
86                 "reset; " \
87         "fi; " \
88         "if mmc rescan; then " \
89                 "echo SD/MMC found on device ${mmc_dev};" \
90                 "if run loadbootenv; then " \
91                         "echo Loaded environment from ${bootenv};" \
92                         "run importbootenv;" \
93                 "fi;" \
94                 "if test -n $uenvcmd; then " \
95                         "echo Running uenvcmd ...;" \
96                         "run uenvcmd;" \
97                 "fi;" \
98                 "if run mmc_load_uimage; then " \
99                         "run mmc_args;" \
100                         "bootm ${kloadaddr};" \
101                 "fi;" \
102         "fi;" \
103         "run nand_boot;" \
104         "reset;"
105
106 #else
107
108 #define CONFIG_BOOTCOMMAND                      \
109         "setenv autoload no; "                  \
110         "dhcp; "                                \
111         "if tftp 80000000 debrick.scr; then "   \
112                 "source 80000000; "             \
113         "fi"
114 #endif
115 #endif  /* CONFIG_SPL_BUILD */
116
117 #if defined(CONFIG_VIDEO)
118 #define CONFIG_VIDEO_DA8XX
119 #define CONFIG_SPLASH_SCREEN
120 #define CONFIG_SPLASH_SCREEN_ALIGN
121 #define CONFIG_VIDEO_LOGO
122 #define CONFIG_VIDEO_BMP_RLE8
123 #define CONFIG_VIDEO_BMP_LOGO
124 #define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
125 #define PWM_TICKS       0x1388
126 #define PWM_DUTY        0x200
127 #endif
128
129 #endif  /* ! __CONFIG_PXM2_H */