Merge branch 'master' of git://git.denx.de/u-boot-spi
[platform/kernel/u-boot.git] / include / configs / pxm2.h
1 /*
2  * siemens pxm2
3  * (C) Copyright 2013 Siemens Schweiz AG
4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5  *
6  * Based on:
7  * U-Boot file:/include/configs/am335x_evm.h
8  *
9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10  *
11  * SPDX-License-Identifier:     GPL-2.0+
12  */
13
14 #ifndef __CONFIG_PXM2_H
15 #define __CONFIG_PXM2_H
16
17 #define CONFIG_SIEMENS_PXM2
18 #define MACH_TYPE_PXM2                  4309
19 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_PXM2
20
21 #include "siemens-am33x-common.h"
22
23 #define CONFIG_SYS_MPUCLK       720
24 #define DDR_IOCTRL_VAL          0x18b
25 #define DDR_PLL_FREQ            266
26
27 #define BOARD_DFU_BUTTON_GPIO   59
28 #define BOARD_LCD_POWER         111
29 #define BOARD_BACK_LIGHT        112
30 #define BOARD_TOUCH_POWER       57
31
32 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
33         "button_dfu0=59\0" \
34         "led0=117,0,1\0" \
35
36  /* Physical Memory Map */
37 #define CONFIG_MAX_RAM_BANK_SIZE        (512 << 20)     /* 1GB */
38
39 /* I2C Configuration */
40 #define CONFIG_SYS_I2C_SPEED            400000
41 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
42
43
44 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x300
45
46 #undef CONFIG_SPL_NET_SUPPORT
47 #undef CONFIG_SPL_NET_VCI_STRING
48 #undef CONFIG_SPL_ETH_SUPPORT
49
50 #define CONFIG_PHY_ATHEROS
51
52 #define CONFIG_FACTORYSET
53
54
55 /* Watchdog */
56 #define CONFIG_OMAP_WATCHDOG
57
58 #ifndef CONFIG_SPL_BUILD
59
60 /* Use common default */
61 #define MTDPARTS_DEFAULT        MTDPARTS_DEFAULT_V1
62
63 /* Default env settings */
64 #define CONFIG_EXTRA_ENV_SETTINGS \
65         "hostname=pxm2\0" \
66         "nand_img_size=0x500000\0" \
67         "optargs=\0" \
68         "preboot=draco_led 0\0" \
69         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
70         "splashpos=m,m\0"       \
71         CONFIG_ENV_SETTINGS_V1 \
72         CONFIG_ENV_SETTINGS_NAND_V1 \
73         "mmc_dev=0\0" \
74         "mmc_root=/dev/mmcblk0p2 rw\0" \
75         "mmc_root_fs_type=ext4 rootwait\0" \
76         "mmc_load_uimage=" \
77                 "mmc rescan; " \
78                 "setenv bootfile uImage;" \
79                 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
80         "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
81         "importbootenv=echo Importing environment from mmc ...; " \
82                 "env import -t $loadaddr $filesize\0" \
83         "mmc_args=run bootargs_defaults;" \
84                 "mtdparts default;" \
85                 "setenv bootargs ${bootargs} " \
86                 "root=${mmc_root} ${mtdparts}" \
87                 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
88                 "eth=${ethaddr} " \
89                 "\0" \
90         "mmc_boot=run mmc_args; " \
91                 "run mmc_load_uimage; " \
92                 "bootm ${kloadaddr}\0" \
93         ""
94
95 #ifndef CONFIG_RESTORE_FLASH
96 /* set to negative value for no autoboot */
97 #define CONFIG_BOOTDELAY                3
98
99 #define CONFIG_BOOTCOMMAND \
100         "if dfubutton; then " \
101                 "run dfu_start; " \
102                 "reset; " \
103         "fi; " \
104         "if mmc rescan; then " \
105                 "echo SD/MMC found on device ${mmc_dev};" \
106                 "if run loadbootenv; then " \
107                         "echo Loaded environment from ${bootenv};" \
108                         "run importbootenv;" \
109                 "fi;" \
110                 "if test -n $uenvcmd; then " \
111                         "echo Running uenvcmd ...;" \
112                         "run uenvcmd;" \
113                 "fi;" \
114                 "if run mmc_load_uimage; then " \
115                         "run mmc_args;" \
116                         "bootm ${kloadaddr};" \
117                 "fi;" \
118         "fi;" \
119         "run nand_boot;" \
120         "reset;"
121
122 #else
123 #define CONFIG_BOOTDELAY                0
124
125 #define CONFIG_BOOTCOMMAND                      \
126         "setenv autoload no; "                  \
127         "dhcp; "                                \
128         "if tftp 80000000 debrick.scr; then "   \
129                 "source 80000000; "             \
130         "fi"
131 #endif
132 #endif  /* CONFIG_SPL_BUILD */
133
134 #define CONFIG_VIDEO
135 #if defined(CONFIG_VIDEO)
136 #define CONFIG_VIDEO_DA8XX
137 #define CONFIG_CFB_CONSOLE
138 #define CONFIG_VGA_AS_SINGLE_DEVICE
139 #define CONFIG_SPLASH_SCREEN
140 #define CONFIG_SPLASH_SCREEN_ALIGN
141 #define CONFIG_VIDEO_LOGO
142 #define CONFIG_VIDEO_BMP_RLE8
143 #define CONFIG_VIDEO_BMP_LOGO
144 #define CONFIG_CMD_BMP
145 #define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
146 #define PWM_TICKS       0x1388
147 #define PWM_DUTY        0x200
148 #define CONFIG_SYS_CONSOLE_BG_COL       0xff
149 #define CONFIG_SYS_CONSOLE_FG_COL       0x00
150 #endif
151
152 #endif  /* ! __CONFIG_PXM2_H */