f4f96a71a05b5fadc3bc63e4ec9cd43fe763f6e3
[platform/kernel/u-boot.git] / include / configs / pm9261.h
1 /*
2  * (C) Copyright 2007-2008
3  * Stelian Pop <stelian@popies.net>
4  * Lead Tech Design <www.leadtechdesign.com>
5  * Ilko Iliev <www.ronetix.at>
6  *
7  * Configuation settings for the RONETIX PM9261 board.
8  *
9  * SPDX-License-Identifier:     GPL-2.0+
10  */
11
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14
15 /*
16  * SoC must be defined first, before hardware.h is included.
17  * In this case SoC is defined in boards.cfg.
18  */
19
20 #include <asm/hardware.h>
21 /* ARM asynchronous clock */
22
23 #define CONFIG_SYS_GENERIC_BOARD
24
25 #define CONFIG_DISPLAY_BOARDINFO
26
27 #define MASTER_PLL_DIV          15
28 #define MASTER_PLL_MUL          162
29 #define MAIN_PLL_DIV            2
30 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
31 #define CONFIG_SYS_AT91_MAIN_CLOCK      18432000
32
33 #define CONFIG_SYS_AT91_CPU_NAME        "AT91SAM9261"
34 #define CONFIG_PM9261           1       /* on a Ronetix PM9261 Board    */
35 #define CONFIG_ARCH_CPU_INIT
36 #define CONFIG_SYS_TEXT_BASE    0
37
38 #define MACH_TYPE_PM9261        1187
39 #define CONFIG_MACH_TYPE        MACH_TYPE_PM9261
40
41 /* clocks */
42 /* CKGR_MOR - enable main osc. */
43 #define CONFIG_SYS_MOR_VAL                                              \
44                 (AT91_PMC_MOR_MOSCEN |                                  \
45                  (255 << 8))            /* Main Oscillator Start-up Time */
46 #define CONFIG_SYS_PLLAR_VAL                                            \
47                 (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \
48                  AT91_PMC_PLLXR_OUT(3) |                                                \
49                  ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
50
51 /* PCK/2 = MCK Master Clock from PLLA */
52 #define CONFIG_SYS_MCKR1_VAL            \
53                 (AT91_PMC_MCKR_CSS_SLOW |       \
54                  AT91_PMC_MCKR_PRES_1 | \
55                  AT91_PMC_MCKR_MDIV_2)
56
57 /* PCK/2 = MCK Master Clock from PLLA */
58 #define CONFIG_SYS_MCKR2_VAL            \
59                 (AT91_PMC_MCKR_CSS_PLLA |       \
60                  AT91_PMC_MCKR_PRES_1 | \
61                  AT91_PMC_MCKR_MDIV_2)
62
63 /* define PDC[31:16] as DATA[31:16] */
64 #define CONFIG_SYS_PIOC_PDR_VAL1        0xFFFF0000
65 /* no pull-up for D[31:16] */
66 #define CONFIG_SYS_PIOC_PPUDR_VAL       0xFFFF0000
67
68 /* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
69 #define CONFIG_SYS_MATRIX_EBICSA_VAL            \
70         (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A)
71
72 /* SDRAM */
73 /* SDRAMC_MR Mode register */
74 #define CONFIG_SYS_SDRC_MR_VAL1         AT91_SDRAMC_MODE_NORMAL
75 /* SDRAMC_TR - Refresh Timer register */
76 #define CONFIG_SYS_SDRC_TR_VAL1         0x13C
77 /* SDRAMC_CR - Configuration register*/
78 #define CONFIG_SYS_SDRC_CR_VAL                                                  \
79                 (AT91_SDRAMC_NC_9 |                                             \
80                  AT91_SDRAMC_NR_13 |                                            \
81                  AT91_SDRAMC_NB_4 |                                             \
82                  AT91_SDRAMC_CAS_3 |                                            \
83                  AT91_SDRAMC_DBW_32 |                                           \
84                  (1 <<  8) |            /* Write Recovery Delay */              \
85                  (7 << 12) |            /* Row Cycle Delay */                   \
86                  (3 << 16) |            /* Row Precharge Delay */               \
87                  (2 << 20) |            /* Row to Column Delay */               \
88                  (5 << 24) |            /* Active to Precharge Delay */         \
89                  (1 << 28))             /* Exit Self Refresh to Active Delay */
90
91 /* Memory Device Register -> SDRAM */
92 #define CONFIG_SYS_SDRC_MDR_VAL         AT91_SDRAMC_MD_SDRAM
93 #define CONFIG_SYS_SDRC_MR_VAL2         AT91_SDRAMC_MODE_PRECHARGE
94 #define CONFIG_SYS_SDRAM_VAL1           0               /* SDRAM_BASE */
95 #define CONFIG_SYS_SDRC_MR_VAL3         AT91_SDRAMC_MODE_REFRESH
96 #define CONFIG_SYS_SDRAM_VAL2           0               /* SDRAM_BASE */
97 #define CONFIG_SYS_SDRAM_VAL3           0               /* SDRAM_BASE */
98 #define CONFIG_SYS_SDRAM_VAL4           0               /* SDRAM_BASE */
99 #define CONFIG_SYS_SDRAM_VAL5           0               /* SDRAM_BASE */
100 #define CONFIG_SYS_SDRAM_VAL6           0               /* SDRAM_BASE */
101 #define CONFIG_SYS_SDRAM_VAL7           0               /* SDRAM_BASE */
102 #define CONFIG_SYS_SDRAM_VAL8           0               /* SDRAM_BASE */
103 #define CONFIG_SYS_SDRAM_VAL9           0               /* SDRAM_BASE */
104 #define CONFIG_SYS_SDRC_MR_VAL4         AT91_SDRAMC_MODE_LMR
105 #define CONFIG_SYS_SDRAM_VAL10          0               /* SDRAM_BASE */
106 #define CONFIG_SYS_SDRC_MR_VAL5         AT91_SDRAMC_MODE_NORMAL
107 #define CONFIG_SYS_SDRAM_VAL11          0               /* SDRAM_BASE */
108 #define CONFIG_SYS_SDRC_TR_VAL2         1200            /* SDRAM_TR */
109 #define CONFIG_SYS_SDRAM_VAL12          0               /* SDRAM_BASE */
110
111 /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
112 #define CONFIG_SYS_SMC0_SETUP0_VAL                                      \
113                 (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) |   \
114                  AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
115 #define CONFIG_SYS_SMC0_PULSE0_VAL                                      \
116                 (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) |   \
117                  AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
118 #define CONFIG_SYS_SMC0_CYCLE0_VAL      \
119                 (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
120 #define CONFIG_SYS_SMC0_MODE0_VAL                               \
121                 (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |  \
122                  AT91_SMC_MODE_DBW_16 |                         \
123                  AT91_SMC_MODE_TDF |                            \
124                  AT91_SMC_MODE_TDF_CYCLE(6))
125
126 /* user reset enable */
127 #define CONFIG_SYS_RSTC_RMR_VAL                 \
128                 (AT91_RSTC_KEY |                \
129                 AT91_RSTC_CR_PROCRST |          \
130                 AT91_RSTC_MR_ERSTL(1) | \
131                 AT91_RSTC_MR_ERSTL(2))
132
133 /* Disable Watchdog */
134 #define CONFIG_SYS_WDTC_WDMR_VAL                                \
135                 (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
136                  AT91_WDT_MR_WDV(0xfff) |                                       \
137                  AT91_WDT_MR_WDDIS |                            \
138                  AT91_WDT_MR_WDD(0xfff))
139
140 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs */
141 #define CONFIG_SETUP_MEMORY_TAGS 1
142 #define CONFIG_INITRD_TAG       1
143
144 #undef CONFIG_SKIP_LOWLEVEL_INIT
145 #define CONFIG_BOARD_EARLY_INIT_F
146
147 /*
148  * Hardware drivers
149  */
150 #define CONFIG_AT91_GPIO        1
151 #define CONFIG_ATMEL_USART      1
152 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
153 #define CONFIG_USART_ID                 ATMEL_ID_SYS
154
155 /* LCD */
156 #define CONFIG_LCD                      1
157 #define LCD_BPP                         LCD_COLOR8
158 #define CONFIG_LCD_LOGO                 1
159 #undef LCD_TEST_PATTERN
160 #define CONFIG_LCD_INFO                 1
161 #define CONFIG_LCD_INFO_BELOW_LOGO      1
162 #define CONFIG_SYS_WHITE_ON_BLACK       1
163 #define CONFIG_ATMEL_LCD                1
164 #define CONFIG_ATMEL_LCD_BGR555         1
165 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
166
167 /* LED */
168 #define CONFIG_AT91_LED
169 #define CONFIG_RED_LED          GPIO_PIN_PC(12)
170 #define CONFIG_GREEN_LED        GPIO_PIN_PC(13)
171 #define CONFIG_YELLOW_LED       GPIO_PIN_PC(15)
172
173 #define CONFIG_BOOTDELAY        3
174
175 /*
176  * BOOTP options
177  */
178 #define CONFIG_BOOTP_BOOTFILESIZE       1
179 #define CONFIG_BOOTP_BOOTPATH           1
180 #define CONFIG_BOOTP_GATEWAY            1
181 #define CONFIG_BOOTP_HOSTNAME           1
182
183 /*
184  * Command line configuration.
185  */
186 #define CONFIG_CMD_CACHE
187 #define CONFIG_CMD_PING         1
188 #define CONFIG_CMD_DHCP         1
189 #define CONFIG_CMD_NAND         1
190 #define CONFIG_CMD_USB          1
191
192 /* SDRAM */
193 #define CONFIG_NR_DRAM_BANKS                    1
194 #define PHYS_SDRAM                              0x20000000
195 #define PHYS_SDRAM_SIZE                         0x04000000      /* 64 megs */
196
197 /* DataFlash */
198 #define CONFIG_ATMEL_DATAFLASH_SPI
199 #define CONFIG_HAS_DATAFLASH
200 #define CONFIG_SYS_MAX_DATAFLASH_BANKS          1
201 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0     0xC0000000      /* CS0 */
202 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3     0xD0000000      /* CS3 */
203 #define AT91_SPI_CLK                            15000000
204 #define DATAFLASH_TCSS                          (0x1a << 16)
205 #define DATAFLASH_TCHS                          (0x1 << 24)
206
207 /* NAND flash */
208 #define CONFIG_NAND_ATMEL
209 #define CONFIG_SYS_MAX_NAND_DEVICE              1
210 #define CONFIG_SYS_NAND_BASE                    0x40000000
211 #define CONFIG_SYS_NAND_DBW_8                   1
212 /* our ALE is AD22 */
213 #define CONFIG_SYS_NAND_MASK_ALE                (1 << 22)
214 /* our CLE is AD21 */
215 #define CONFIG_SYS_NAND_MASK_CLE                (1 << 21)
216 #define CONFIG_SYS_NAND_ENABLE_PIN              GPIO_PIN_PC(14)
217 #define CONFIG_SYS_NAND_READY_PIN               GPIO_PIN_PA(16)
218
219 /* NOR flash */
220 #define CONFIG_SYS_FLASH_CFI                    1
221 #define CONFIG_FLASH_CFI_DRIVER                 1
222 #define PHYS_FLASH_1                            0x10000000
223 #define CONFIG_SYS_FLASH_BASE                   PHYS_FLASH_1
224 #define CONFIG_SYS_MAX_FLASH_SECT               256
225 #define CONFIG_SYS_MAX_FLASH_BANKS              1
226
227 /* Ethernet */
228 #define CONFIG_DRIVER_DM9000                    1
229 #define CONFIG_DM9000_BASE                      0x30000000
230 #define DM9000_IO                               CONFIG_DM9000_BASE
231 #define DM9000_DATA                             (CONFIG_DM9000_BASE + 4)
232 #define CONFIG_DM9000_USE_16BIT                 1
233 #define CONFIG_NET_RETRY_COUNT                  20
234 #define CONFIG_RESET_PHY_R                      1
235
236 /* USB */
237 #define CONFIG_USB_ATMEL
238 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
239 #define CONFIG_USB_OHCI_NEW                     1
240 #define CONFIG_DOS_PARTITION                    1
241 #define CONFIG_SYS_USB_OHCI_CPU_INIT            1
242 #define CONFIG_SYS_USB_OHCI_REGS_BASE           0x00500000
243 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9261"
244 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
245 #define CONFIG_USB_STORAGE                      1
246
247 #define CONFIG_SYS_LOAD_ADDR                    0x22000000
248
249 #define CONFIG_SYS_MEMTEST_START                PHYS_SDRAM
250 #define CONFIG_SYS_MEMTEST_END                  0x23e00000
251
252 #undef CONFIG_SYS_USE_DATAFLASH_CS0
253 #undef CONFIG_SYS_USE_NANDFLASH
254 #define CONFIG_SYS_USE_FLASH    1
255
256 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
257
258 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
259 #define CONFIG_ENV_IS_IN_DATAFLASH      1
260 #define CONFIG_SYS_MONITOR_BASE         \
261                 (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
262 #define CONFIG_ENV_OFFSET       0x4200
263 #define CONFIG_ENV_ADDR         \
264                 (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
265 #define CONFIG_ENV_SIZE         0x4200
266 #define CONFIG_BOOTCOMMAND      "cp.b 0xC0042000 0x22000000 0x210000; bootm"
267 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
268                                 "root=/dev/mtdblock0 "                  \
269                                 "mtdparts=atmel_nand:-(root) "          \
270                                 "rw rootfstype=jffs2"
271
272 #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */
273
274 /* bootstrap + u-boot + env + linux in nandflash */
275 #define CONFIG_ENV_IS_IN_NAND           1
276 #define CONFIG_ENV_OFFSET               0x60000
277 #define CONFIG_ENV_OFFSET_REDUND        0x80000
278 #define CONFIG_ENV_SIZE                 0x20000         /* 1 sector = 128 kB */
279 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0xA0000 0x200000; bootm"
280 #define CONFIG_BOOTARGS         "console=ttyS0,115200 "                 \
281                                 "root=/dev/mtdblock5 "                  \
282                                 "mtdparts=atmel_nand:128k(bootstrap)ro,"        \
283                                 "256k(uboot)ro,128k(env1)ro,"           \
284                                 "128k(env2)ro,2M(linux),-(root) "       \
285                                 "rw rootfstype=jffs2"
286
287 #elif defined (CONFIG_SYS_USE_FLASH)
288
289 #define CONFIG_ENV_IS_IN_FLASH  1
290 #define CONFIG_ENV_OFFSET       0x40000
291 #define CONFIG_ENV_SECT_SIZE    0x10000
292 #define CONFIG_ENV_SIZE         0x10000
293 #define CONFIG_ENV_OVERWRITE    1
294
295 /* JFFS Partition offset set */
296 #define CONFIG_SYS_JFFS2_FIRST_BANK     0
297 #define CONFIG_SYS_JFFS2_NUM_BANKS      1
298
299 /* 512k reserved for u-boot */
300 #define CONFIG_SYS_JFFS2_FIRST_SECTOR   11
301
302 #define CONFIG_BOOTCOMMAND      "run flashboot"
303
304 #define MTDIDS_DEFAULT          "nor0=physmap-flash.0,nand0=nand"
305 #define MTDPARTS_DEFAULT                \
306         "mtdparts=physmap-flash.0:"     \
307                 "256k(u-boot)ro,"       \
308                 "64k(u-boot-env)ro,"    \
309                 "1408k(kernel),"        \
310                 "-(rootfs);"            \
311         "nand:-(nand)"
312
313 #define CONFIG_CON_ROT "fbcon=rotate:3 "
314 #define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 " CONFIG_CON_ROT
315
316 #define CONFIG_EXTRA_ENV_SETTINGS                               \
317         "mtdids=" MTDIDS_DEFAULT "\0"                           \
318         "mtdparts=" MTDPARTS_DEFAULT "\0"                       \
319         "partition=nand0,0\0"                                   \
320         "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0"     \
321         "nfsargs=setenv bootargs root=/dev/nfs rw "             \
322                 CONFIG_CON_ROT                                  \
323                 "nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
324         "addip=setenv bootargs $(bootargs) "                    \
325                 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
326                 ":$(hostname):eth0:off\0"                       \
327         "ramboot=tftpboot 0x22000000 vmImage;"                  \
328                 "run ramargs;run addip;bootm 22000000\0"        \
329         "nfsboot=tftpboot 0x22000000 vmImage;"                  \
330                 "run nfsargs;run addip;bootm 22000000\0"        \
331         "flashboot=run ramargs;run addip;bootm 0x10050000\0"    \
332         ""
333 #else
334 #error "Undefined memory device"
335 #endif
336
337 #define CONFIG_BAUDRATE                 115200
338
339 #define CONFIG_SYS_CBSIZE               256
340 #define CONFIG_SYS_MAXARGS              16
341 #define CONFIG_SYS_PBSIZE               \
342                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
343 #define CONFIG_SYS_LONGHELP             1
344 #define CONFIG_CMDLINE_EDITING  1
345
346 /*
347  * Size of malloc() pool
348  */
349 #define CONFIG_SYS_MALLOC_LEN           \
350                 ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
351
352 #define CONFIG_SYS_SDRAM_BASE   PHYS_SDRAM
353 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
354                                 GENERATED_GBL_DATA_SIZE)
355
356 #endif