2 * (C) Copyright 2009 DENX Software Engineering
3 * Author: John Rigby <jrigby@gmail.com>
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 //#define CONFIG_OF_LIBFDT
25 //#ifdef CONFIG_OF_LIBFDT
26 //MACH_TYPE_SC8830=2014
28 #define DT_PLATFROM_ID 8830
29 #define DT_HARDWARE_ID 1
30 #define DT_SOC_VER 0x20000
32 //only used in fdl2 .in uart download, the debug infors from serial will break the download process.
33 #define CONFIG_FDL2_PRINT 0
34 #define BOOT_NATIVE_LINUX 1
35 #define BOOT_NATIVE_LINUX_MODEM 1
36 #define CONFIG_SILENT_CONSOLE
37 #define CONFIG_GPIOLIB 1
40 //#define CONFIG_SDRAMDISK
41 #define U_BOOT_SPRD_VER 1
42 /*#define SPRD_EVM_TAG_ON 1*/
43 #ifdef SPRD_EVM_TAG_ON
44 #define SPRD_EVM_ADDR_START 0x00026000
45 #define SPRD_EVM_TAG(_x) (*(((unsigned long *)SPRD_EVM_ADDR_START)+_x) = *(volatile unsigned long *)0x87003004)
47 #define CONFIG_L2_OFF 1
51 #define CONFIG_YAFFS2 1
53 #define BOOT_PART "boot"
54 //#define BOOT_PART "kernel"
55 #define RECOVERY_PART "recovery"
56 #define UBIPAC_PART "ubipac"
59 * SPREADTRUM BIGPHONE board - SoC Configuration
61 //#define CONFIG_SP8830
65 #define CONFIG_PIKEAYOUNG2DTV
66 //#define CONFIG_SP8830WCN
67 #define CONFIG_ADIE_SC2723S
69 #define CONFIG_SUPPORT_W
70 #define WDSP_ADR 0x88020000
71 #define WFIXNV_ADR 0x88240000
72 #define WRUNTIMENV_ADR 0x88280000
73 #define WMODEM_ADR 0x88300000
74 #define MODEM_ADR WMODEM_ADR
75 //#define CONFIG_SUPPORT_WIFI
76 #define WCNMODEM_ADR 0x8a808000
77 #define WCNFIXNV_ADR 0x8a800000
78 #define WCNRUNTIMENV_ADR 0x8a820000
79 //#define WMODEM_CODE_COPY_ADR 0x50000000
80 //#define WCN_CODE_COPY_ADR 0x50003000
82 #define CP0_CODE_COPY_ADR 0x50000000
83 #define CP2_CODE_COPY_ADR 0x50003000
85 #define CONFIG_AUTODLOADER
87 #define CHIP_ENDIAN_LITTLE
88 #define _LITTLE_ENDIAN 1
90 #define CONFIG_RAM512M
93 #define CONFIG_EMMC_BOOT
96 #ifdef CONFIG_EMMC_BOOT
97 #define EMMC_SECTOR_SIZE 512
100 #define CONFIG_FS_EXT4
101 #define CONFIG_EXT4_WRITE
102 #define CONFIG_CMD_EXT4
103 #define CONFIG_CMD_EXT4_WRITE
105 //#define CONFIG_TIGER_MMC
106 #define CONFIG_UEFI_PARTITION
107 #define CONFIG_EFI_PARTITION
108 #define CONFIG_EXT4_SPARSE_DOWNLOAD
109 //#define CONFIG_EMMC_SPL
110 #define CONFIG_SYS_EMMC_U_BOOT_SECTOR_NUM ((CONFIG_SYS_NAND_U_BOOT_SIZE+EMMC_SECTOR_SIZE-1)/EMMC_SECTOR_SIZE)
117 #define CONFIG_CMD_MMC
118 #ifdef CONFIG_CMD_MMC
119 #define CONFIG_CMD_FAT 1
120 #define CONFIG_FAT_WRITE 1
122 #define CONFIG_GENERIC_MMC 1
123 #define CONFIG_SDHCI 1
124 #define CONFIG_SDHCI_CTRL_NO_HISPD 1 /* disable high speed control */
125 #define CONFIG_SYS_MMC_MAX_BLK_COUNT 0x1000
126 #define CONFIG_MMC_SDMA 1
127 #define CONFIG_MV_SDHCI 1
128 #define CONFIG_DOS_PARTITION 1
129 #define CONFIG_EFI_PARTITION 1
130 #define CONFIG_SYS_MMC_NUM 1
131 #define CONFIG_SYS_MMC_BASE {0x20600000}
132 #define CONFIG_SYS_SD_BASE 0x20300000
135 #define BB_DRAM_TYPE_256MB_32BIT
137 #define CONFIG_SYS_HZ 1000
138 #define CONFIG_SPRD_TIMER_CLK 1000 /*32768*/
140 //#define CONFIG_SYS_HUSH_PARSER
142 #ifdef CONFIG_SYS_HUSH_PARSER
143 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
146 #define FIXNV_SIZE (2*128 * 1024)
147 #define PRODUCTINFO_SIZE (16 * 1024)
148 #define WMODEM_SIZE (0x800000)
149 #define WDSP_SIZE (0x200000)
150 #define WCNMODEM_SIZE (0x100000)
151 #define VMJALUNA_SIZE (0x64000) /* 400K */
152 #define RUNTIMENV_SIZE (3*128 * 1024)
153 #define CONFIG_SPL_LOAD_LEN (0x6000)
155 #define PRODUCTINFO_ADR 0x80490000
157 /*#define CMDLINE_NEED_CONV */
159 #define WATCHDOG_LOAD_VALUE 0x4000
160 #define CONFIG_SYS_STACK_SIZE 0x400
161 //#define CONFIG_SYS_TEXT_BASZE 0x80f00000
163 //#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */
165 /* NAND BOOT is the only boot method */
166 #define CONFIG_NAND_U_BOOT
167 #define DYNAMIC_CRC_TABLE
168 /* Start copying real U-boot from the second page */
169 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
170 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0xa0000
171 #define RAM_TYPPE_IS_SDRAM 0
172 //#define FPGA_TRACE_DOWNLOAD //for download image from trace
174 /* Load U-Boot to this address */
175 #define CONFIG_SYS_NAND_U_BOOT_DST 0x8f800000
176 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
177 #define CONFIG_SYS_SDRAM_BASE 0x80000000
178 #define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE + 256*1024*1024)
180 #ifdef CONFIG_NAND_SPL
181 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_END - 0x40000)
184 #define CONFIG_MMU_TABLE_ADDR (0x00020000)
185 #define CONFIG_SYS_INIT_SP_ADDR \
186 (CONFIG_SYS_SDRAM_END - 0x10000 - GENERATED_GBL_DATA_SIZE)
188 #define CONFIG_SKIP_LOWLEVEL_INIT
191 #define CONFIG_HW_WATCHDOG
192 //#define CONFIG_AUTOBOOT //used for FPGA test, auto boot other image
193 //#define CONFIG_DISPLAY_CPUINFO
195 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
196 #define CONFIG_SETUP_MEMORY_TAGS 1
197 #define CONFIG_INITRD_TAG 1
203 #define CONFIG_SYS_MALLOC_LEN (2 << 20) /* 1 MiB */
205 * Board has 2 32MB banks of DRAM but there is a bug when using
206 * both so only the first is configured
208 #define CONFIG_NR_DRAM_BANKS 1
210 #define PHYS_SDRAM_1 0x80000000
211 #define PHYS_SDRAM_1_SIZE 0x10000000
212 #if (CONFIG_NR_DRAM_BANKS == 2)
213 #define PHYS_SDRAM_2 0x90000000
214 #define PHYS_SDRAM_2_SIZE 0x10000000
217 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
218 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1+0x0800000)
219 #define CONFIG_STACKSIZE (256 * 1024) /* regular stack */
224 #define CONFIG_SPRD_UART 1
225 #define CONFIG_SYS_SC8800X_UART1 1
226 #define CONFIG_CONS_INDEX 1 /* use UART0 for console */
227 #define CONFIG_BAUDRATE 115200 /* Default baud rate */
228 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
229 #define CONFIG_SPRD_SPI
230 #define CONFIG_SPRD_I2C
231 #define CONFIG_SC8830_I2C
233 * Flash & Environment
235 /* No NOR flash present */
236 #define CONFIG_SYS_MONITOR_LEN ((CONFIG_SYS_NAND_U_BOOT_OFFS)+(CONFIG_SYS_NAND_U_BOOT_SIZE))
237 #define CONFIG_SYS_NO_FLASH 1
238 #define CONFIG_ENV_IS_NOWHERE
239 #define CONFIG_ENV_SIZE (128 * 1024)
241 #define CONFIG_ENV_IS_IN_NAND
242 #define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN
243 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
247 #define CONFIG_CLK_PARA
249 #ifndef CONFIG_CLK_PARA
252 #define MAGIC_HEADER 0x5555AAAA
253 #define MAGIC_END 0xAAAA5555
254 #define CONFIG_PARA_VERSION 1
255 #define CLK_CA7_CORE ARM_CLK_1000M
256 #define CLK_CA7_AXI ARM_CLK_500M
257 #define CLK_CA7_DGB ARM_CLK_200M
258 #define CLK_CA7_AHB AHB_CLK_192M
259 #define CLK_CA7_APB APB_CLK_64M
260 #define CLK_PUB_AHB PUB_AHB_CLK_153_6M
261 #define CLK_AON_APB AON_APB_CLK_128M
262 #define DDR_FREQ 800000000
263 #define DCDC_ARM 1200
264 #define DCDC_CORE 1100
265 #define CONFIG_VOL_PARA
270 #define CONFIG_NAND_SC8830
271 #define CONFIG_SPRD_NAND_REGS_BASE (0x20B00000)
272 #define CONFIG_SYS_MAX_NAND_DEVICE 1
273 #define CONFIG_SYS_NAND_BASE (0x20B00000)
274 //#define CONFIG_JFFS2_NAND
275 //#define CONFIG_SPRD_NAND_HWECC
276 #define CONFIG_SYS_NAND_HW_ECC
277 #define CONFIG_SYS_NAND_LARGEPAGE
278 //#define CONFIG_SYS_NAND_5_ADDR_CYCLE
280 #define CONFIG_SYS_64BIT_VSPRINTF
282 #define CONFIG_CMD_MTDPARTS
283 #define CONFIG_MTD_PARTITIONS
284 #define CONFIG_MTD_DEVICE
285 #define CONFIG_CMD_UBI
286 #define CONFIG_RBTREE
288 #define CONFIG_CMD_UBIFS
290 #ifdef CONFIG_CMD_UBIFS
291 #define CONFIG_FS_UBIFS
294 /* U-Boot general configuration */
295 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
296 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
297 /* Print buffer sz */
298 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
299 sizeof(CONFIG_SYS_PROMPT) + 16)
300 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
301 /* Boot Argument Buffer Size */
302 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
303 #define CONFIG_CMDLINE_EDITING
304 #define CONFIG_SYS_LONGHELP
306 /* support OS choose */
307 #undef CONFIG_BOOTM_NETBSD
308 #undef CONFIG_BOOTM_RTEMS
310 /* U-Boot commands */
311 #include <config_cmd_default.h>
312 #define CONFIG_CMD_NAND
313 #undef CONFIG_CMD_FPGA
314 #undef CONFIG_CMD_LOADS
315 #undef CONFIG_CMD_NET
316 #undef CONFIG_CMD_NFS
317 #undef CONFIG_CMD_SETGETDCR
319 #define CONFIG_ENV_OVERWRITE
321 #ifdef SPRD_EVM_TAG_ON
322 #define CONFIG_BOOTDELAY 0
324 #define CONFIG_BOOTDELAY 0
325 #define CONFIG_ZERO_BOOTDELAY_CHECK
328 #define CONFIG_LOADADDR (CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_LEN - 4*1024*1024) /* loadaddr env var */
329 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
331 #define xstr(s) str(s)
334 #ifdef CONFIG_RAM512M
335 #define MEM_INIT_PARA "mem=512M"
336 #elif defined(CONFIG_RAM256M)
337 #define MEM_INIT_PARA "mem=256M"
338 //#elif defined(CONFIG_RAMxxxM)
339 ////#define MEM_INIT_PARA "mem=xxxM" //xxx maybe 1024 etc
341 #error "CONFIG_RAMxxxM macro must be defined"
343 #define MTDIDS_DEFAULT "nand0=sprd-nand"
344 //#define MTDPARTS_DEFAULT "mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),250m(system),180m(userdata),20m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic)"
345 #define MTDPARTS_DEFAULT "mtdparts=sprd-nand:256k(spl),768k(2ndbl),512k(kpanic),-(ubipac)"
346 #define CONFIG_BOOTARGS MEM_INIT_PARA" loglevel=1 console=ttyS1,115200n8 init=/init " MTDPARTS_DEFAULT
348 #define COPY_LINUX_KERNEL_SIZE (0x600000)
349 #define LINUX_INITRD_NAME "modem"
351 #define CONFIG_BOOTCOMMAND "cboot normal"
352 #define CONFIG_EXTRA_ENV_SETTINGS ""
354 #ifdef CONFIG_CMD_NET
355 #define CONFIG_IPADDR 192.168.10.2
356 #define CONFIG_SERVERIP 192.168.10.5
357 #define CONFIG_NETMASK 255.255.255.0
358 #define CONFIG_USBNET_DEVADDR 26:03:ee:00:87:9f
359 #define CONFIG_USBNET_HOSTADDR 9a:04:c7:d6:30:d0
362 #define CONFIG_NET_MULTI
363 #define CONFIG_CMD_DNS
364 #define CONFIG_CMD_NFS
365 #define CONFIG_CMD_RARP
366 #define CONFIG_CMD_PING
367 /*#define CONFIG_CMD_SNTP */
370 #define CONFIG_USB_CORE_IP_293A
371 #define CONFIG_USB_GADGET_SC8800G
372 #define CONFIG_USB_DWC
373 #define CONFIG_USB_GADGET_DUALSPEED
374 //#define CONFIG_USB_ETHER
375 #define CONFIG_CMD_FASTBOOT
376 #define SCRATCH_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100000)
377 #define FB_DOWNLOAD_BUF_SIZE (CONFIG_SYS_NAND_U_BOOT_DST - SCRATCH_ADDR-0x800000)
378 #define SCRATCH_ADDR_EXT1 (CONFIG_SYS_NAND_U_BOOT_DST + 32*1024*1024)
379 #define FB_DOWNLOAD_BUF_EXT1_SIZE (224*1024*1024)
381 #define CONFIG_MODEM_CALIBERATE
382 #define CONFIG_MODEM_CALI_UART
386 #define CONFIG_DSIH_VERSION_1P21A
387 #define CONFIG_SPLASH_SCREEN
388 #define LCD_BPP LCD_COLOR16
389 #define CONFIG_LCD_HVGA 1
390 //#define CONFIG_LCD_QVGA 1
391 //#define CONFIG_LCD_QHD 1
392 //#define CONFIG_LCD_720P 1
393 //#define CONFIG_LCD_INFO
394 //#define LCD_TEST_PATTERN
395 //#define CONFIG_LCD_LOGO
396 //#define CONFIG_FB_LCD_S6D0139
397 //#define CONFIG_FB_LCD_HX8389C_MIPI
398 //#define CONFIG_FB_LCD_SSD2075_MIPI
399 //#define CONFIG_FB_LCD_NT35516_MIPI
400 #define CONFIG_FB_LCD_ILI9486S1_MIPI
401 #define CONFIG_SYS_WHITE_ON_BLACK
402 #ifdef LCD_TEST_PATTERN
403 #define CONSOLE_COLOR_RED 0xf800
404 #define CONSOLE_COLOR_GREEN 0x07e0
405 #define CONSOLE_COLOR_YELLOW 0x07e0
406 #define CONSOLE_COLOR_BLUE 0x001f
407 #define CONSOLE_COLOR_MAGENTA 0x001f
408 #define CONSOLE_COLOR_CYAN 0x001f
412 #define CONFIG_SPRD_SYSDUMP
413 #include <asm/sizes.h>
415 #ifdef CONFIG_RAM512M
416 #define SPRD_SYSDUMP_MAGIC ((PHYS_OFFSET_ADDR & (~(SZ_512M - 1))) + SZ_512M - SZ_1M)
417 #elif defined(CONFIG_RAM256M)
418 #define SPRD_SYSDUMP_MAGIC ((PHYS_OFFSET_ADDR & (~(SZ_256M - 1))) + SZ_256M - SZ_1M)
419 //#elif defined(CONFIG_RAMxxxM)
420 //#define SPRD_SYSDUMP_MAGIC ((PHYS_OFFSET_ADDR & (~(SZ_xxxM - 1))) + SZ_xxxM - SZ_1M) //xxx maybe 1024 etc
422 #error "CONFIG_RAMxxxM macro must be defined"
425 #define CALIBRATE_ENUM_MS 3000
426 #define CALIBRATE_IO_MS 2000
428 //#define LOW_BAT_ADC_LEVEL 782 /*phone battery adc value low than this value will not boot up*/
429 #define LOW_BAT_VOL 3500 /*phone battery voltage low than this value will not boot up*/
430 #define LOW_BAT_VOL_CHG 3300 //3.3V charger connect
432 #define PWR_KEY_DETECT_CNT 12 /*this should match the count of boot_pwr_check() function */
433 #define ALARM_LEAD_SET_MS 0 /* time set for alarm boot in advancd */
435 #define PHYS_OFFSET_ADDR 0x80000000
436 #define TD_CP_OFFSET_ADDR 0x8000000 /*128*/
437 #define TD_CP_SDRAM_SIZE 0x1200000 /*18M*/
438 #define WCDMA_CP_OFFSET_ADDR 0x8000000 /*256M*/
439 #define WCDMA_CP_SDRAM_SIZE 0x1c00000 /*28M*/
440 #define WCN_CP_OFFSET_ADDR 0x0a800000 /*168M*/
441 #define WCN_CP_SDRAM_SIZE 0x201000 /*cp2size*/
443 #define SIPC_APCP_RESET_ADDR_SIZE 0xC00 /*3K*/
444 #define SIPC_APCP_RESET_SIZE 0x1000 /*4K*/
445 #define SIPC_TD_APCP_START_ADDR (PHYS_OFFSET_ADDR + TD_CP_OFFSET_ADDR + TD_CP_SDRAM_SIZE - SIPC_APCP_RESET_SIZE) /*0x897FF000*/
446 #define SIPC_WCDMA_APCP_START_ADDR (PHYS_OFFSET_ADDR + WCDMA_CP_OFFSET_ADDR + WCDMA_CP_SDRAM_SIZE - SIPC_APCP_RESET_SIZE) /*0x899F0000*/
447 #define SIPC_WCN_APCP_START_ADDR (PHYS_OFFSET_ADDR + WCN_CP_OFFSET_ADDR + WCN_CP_SDRAM_SIZE - SIPC_APCP_RESET_SIZE) /*0x94EFF000*/
448 #define CALIBRATION_FLAG (PHYS_OFFSET_ADDR + WCDMA_CP_OFFSET_ADDR + WCDMA_CP_SDRAM_SIZE - 0x400)
449 #define CALIBRATION_FLAG_WCDMA CALIBRATION_FLAG
451 #define CONFIG_RAM_CONSOLE
453 #ifdef CONFIG_RAM_CONSOLE
454 #define CONFIG_RAM_CONSOLE_SIZE 0x80000
455 #define CONFIG_RAM_CONSOLE_START (CONFIG_SYS_NAND_U_BOOT_START + 0x600000)
457 //#define CALIBRATION_FLAG 0x89700000
459 #define CONFIG_CMD_SOUND 1
460 #define CONFIG_CMD_FOR_HTC 1
461 #define CONFIG_SOUND_CODEC_SPRD_V3 1
462 #define CONFIG_SOUND_DAI_VBC_R2P0 1
463 /* #define CONFIG_SPRD_AUDIO_DEBUG */
465 #define CONFIG_RAMDUMP_NO_SPLIT 1 /* Don't split sysdump file */
467 #define CONFIG_PBINT_7S_RESET_V1
469 #define CONFIG_7S_RST_MODULE_EN 1 //0:disable module; 1:enable module
471 #define CONFIG_7S_RST_SW_MODE 1 //0:hw reset,1:arm reset,power keep on
472 #define CONFIG_7S_RST_SHORT_MODE 1 //0:long press then release key to trigger;1:press key some time to trigger
473 #define CONFIG_7S_RST_2KEY_MODE 0 //0:1Key--Normal mode; 1:2KEY
474 #define CONFIG_7S_RST_THRESHOLD 7 //7S, hold key down for this time to trigger
476 #define USB_PHY_TUNE_VALUE 0x44073e33
478 /*control the CP need to boot*/
479 #define modem_cp0_enable 1
480 #define modem_cp1_enable 0
481 #define modem_cp2_enable 0
483 #endif /* __CONFIG_H */