include/configs/pico-imx6ul.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Technexion Ltd.
   4  *
   5  * Configuration settings for the Technexion PICO-IMX6UL-EMMC board.
   6  */
   7 #ifndef __PICO_IMX6UL_CONFIG_H
   8 #define __PICO_IMX6UL_CONFIG_H
   9
  10
  11 #include <asm/arch/imx-regs.h>
  12 #include <linux/sizes.h>
  13 #include "mx6_common.h"
  14 #include <asm/mach-imx/gpio.h>
  15 #include "imx6_spl.h"
  16
  17 #ifdef CONFIG_SPL_OS_BOOT
  18 /* Falcon Mode */
  19 #define CONFIG_SPL_FS_LOAD_ARGS_NAME   "args"
  20 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
  21 #define CONFIG_SYS_SPL_ARGS_ADDR   0x88000000
  22
  23 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  24 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
  25 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  26 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1000  /* 2MB */
  27 #endif
  28
  29 /* Network support */
  30
  31 #define CONFIG_FEC_MXC
  32 #define IMX_FEC_BASE                    ENET2_BASE_ADDR
  33 #define CONFIG_FEC_MXC_PHYADDR          0x1
  34 #define CONFIG_FEC_XCV_TYPE             RMII
  35
  36 /* Size of malloc() pool */
  37 #define CONFIG_SYS_MALLOC_LEN           (35 * SZ_1M) /* Increase due to DFU */
  38
  39 #define CONFIG_MXC_UART
  40 #define CONFIG_MXC_UART_BASE            UART6_BASE_ADDR
  41
  42 /* MMC Configs */
  43 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC1_BASE_ADDR
  44 #define CONFIG_SUPPORT_EMMC_BOOT
  45
  46 /* USB Configs */
  47 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  48 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  49 #define CONFIG_MXC_USB_FLAGS            0
  50 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  51
  52 #define CONFIG_USBD_HS
  53
  54 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
  55 #define DFU_DEFAULT_POLL_TIMEOUT 300
  56
  57 #define CONFIG_DFU_ENV_SETTINGS \
  58         "dfu_alt_info=" \
  59                 "spl raw 0x2 0x400;" \
  60                 "u-boot raw 0x8a 0x400;" \
  61                 "/boot/zImage ext4 0 1;" \
  62                 "/boot/imx6ul-pico-hobbit.dtb ext4 0 1;" \
  63                 "/boot/imx6ul-pico-pi.dtb ext4 0 1;" \
  64                 "rootfs part 0 1\0" \
  65
  66 #define BOOTMENU_ENV \
  67         "bootmenu_0=Boot using PICO-Hobbit baseboard=" \
  68                 "setenv fdtfile imx6ul-pico-hobbit.dtb\0" \
  69         "bootmenu_1=Boot using PICO-Pi baseboard=" \
  70                 "setenv fdtfile imx6ul-pico-pi.dtb\0" \
  71
  72 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  73
  74 #define CONFIG_EXTRA_ENV_SETTINGS \
  75         "script=boot.scr\0" \
  76         "image=zImage\0" \
  77         "console=ttymxc5\0" \
  78         "fdt_high=0xffffffff\0" \
  79         "initrd_high=0xffffffff\0" \
  80         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
  81         BOOTMENU_ENV \
  82         "fdt_addr=0x83000000\0" \
  83         "fdt_addr_r=0x83000000\0" \
  84         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  85         "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
  86         "ramdisk_addr_r=0x83000000\0" \
  87         "ramdiskaddr=0x83000000\0" \
  88         "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
  89         "mmcautodetect=yes\0" \
  90         CONFIG_DFU_ENV_SETTINGS \
  91         "findfdt=" \
  92                 "if test $fdtfile = ask ; then " \
  93                         "bootmenu -1; fi;" \
  94                 "if test $fdtfile != ask ; then " \
  95                         "saveenv; fi;\0" \
  96         "finduuid=part uuid mmc 0:1 uuid\0" \
  97         "partitions=" \
  98                 "uuid_disk=${uuid_gpt_disk};" \
  99                 "name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \
 100         "fastboot_partition_alias_system=rootfs\0" \
 101         "setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \
 102         BOOTENV
 103
 104 #define BOOT_TARGET_DEVICES(func) \
 105         func(MMC, mmc, 0) \
 106         func(USB, usb, 0) \
 107         func(PXE, pxe, na) \
 108         func(DHCP, dhcp, na)
 109
 110 #include <config_distro_bootcmd.h>
 111
 112 #define CONFIG_SYS_MEMTEST_START        0x80000000
 113 #define CONFIG_SYS_MEMTEST_END          CONFIG_SYS_MEMTEST_START + SZ_128M
 114
 115 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 116 #define CONFIG_SYS_HZ                   1000
 117
 118 /* Physical Memory Map */
 119 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 120
 121 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 122 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 123 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 124
 125 #define CONFIG_SYS_INIT_SP_OFFSET \
 126         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 127 #define CONFIG_SYS_INIT_SP_ADDR \
 128         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 129
 130 /* I2C configs */
 131 #define CONFIG_SYS_I2C
 132 #define CONFIG_SYS_I2C_MXC
 133 #define CONFIG_SYS_I2C_MXC_I2C1
 134 #define CONFIG_SYS_I2C_SPEED            100000
 135
 136 /* PMIC */
 137 #define CONFIG_POWER
 138 #define CONFIG_POWER_I2C
 139 #define CONFIG_POWER_PFUZE3000
 140 #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
 141
 142 /* environment organization */
 143 #define CONFIG_ENV_SIZE                 SZ_8K
 144 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 145
 146 #define CONFIG_SYS_MMC_ENV_DEV          0
 147 #define CONFIG_SYS_MMC_ENV_PART         0
 148
 149 #endif /* __PICO_IMX6UL_CONFIG_H */