1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) Stefano Babic <sbabic@denx.de>
7 #ifndef __PCM058_CONFIG_H
8 #define __PCM058_CONFIG_H
11 #define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
15 #include "mx6_common.h"
18 #define CONFIG_IMX_THERMAL
21 #define CONFIG_MXC_UART
22 #define CONFIG_MXC_UART_BASE UART4_BASE
23 #define CONSOLE_DEV "ttymxc3"
28 /* Size of malloc() pool */
29 #define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M)
32 #define IMX_FEC_BASE ENET_BASE_ADDR
33 #define CONFIG_FEC_XCV_TYPE RGMII
34 #define CONFIG_ETHPRIME "FEC"
35 #define CONFIG_FEC_MXC_PHYADDR 3
38 #define CONFIG_SF_DEFAULT_BUS 2
39 #define CONFIG_SF_DEFAULT_CS 0
40 #define CONFIG_SF_DEFAULT_SPEED 20000000
41 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
44 #define CONFIG_SYS_I2C
45 #define CONFIG_SYS_I2C_MXC
46 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 0 */
47 #define CONFIG_SYS_I2C_SPEED 100000
49 #ifndef CONFIG_SPL_BUILD
50 #define CONFIG_CMD_NAND
51 /* Enable NAND support */
52 #define CONFIG_CMD_NAND_TRIMFFS
53 #define CONFIG_SYS_MAX_NAND_DEVICE 1
54 #define CONFIG_SYS_NAND_BASE 0x40000000
55 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
56 #define CONFIG_SYS_NAND_ONFI_DETECTION
59 /* DMA stuff, needed for GPMI/MXS NAND support */
61 /* Filesystem support */
63 /* Various command support */
65 /* Physical Memory Map */
66 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
68 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
69 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
70 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
72 #define CONFIG_SYS_INIT_SP_OFFSET \
73 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
74 #define CONFIG_SYS_INIT_SP_ADDR \
75 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
78 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
79 #define CONFIG_SYS_FSL_USDHC_NUM 2
81 /* Environment organization */
82 #define CONFIG_ENV_IS_IN_SPI_FLASH
83 #define CONFIG_ENV_SIZE (16 * 1024)
84 #define CONFIG_ENV_OFFSET (1024 * SZ_1K)
85 #define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
86 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
87 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
88 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
89 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
90 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
91 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
93 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
95 #ifdef CONFIG_ENV_IS_IN_NAND
96 #define CONFIG_ENV_OFFSET (0x1E0000)
97 #define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
100 /* Default environment */
101 #define CONFIG_EXTRA_ENV_SETTINGS \
102 "addcons=setenv bootargs ${bootargs} " \
103 "console=${console},${baudrate}\0" \
104 "addip=setenv bootargs ${bootargs} " \
105 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
106 "${netmask}:${hostname}:${netdev}:off\0" \
107 "addmisc=setenv bootargs ${bootargs} ${miscargs}\0" \
108 "addmtd=run mtdnand;run mtdspi;" \
109 "setenv bootargs ${bootargs} ${mtdparts}\0" \
110 "mtdnand=setenv mtdparts mtdparts=gpmi-nand:" \
111 "40m(Kernels),400m(root),-(nand)\0" \
112 "mtdspi=setenv mtdparts ${mtdparts}" \
113 "';spi2.0:1024k(bootloader)," \
114 "64k(env1),64k(env2),-(rescue)'\0" \
115 "bootcmd=if test -n ${rescue};" \
116 "then run swupdate;fi;run nandboot;run swupdate\0" \
117 "bootfile=uImage\0" \
118 "bootimage=uImage\0" \
119 "console=ttymxc3\0" \
120 "fdt_addr_r=0x18000000\0" \
121 "fdt_file=pfla02.dtb\0" \
122 "fdt_high=0xffffffff\0" \
123 "initrd_high=0xffffffff\0" \
124 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
125 "miscargs=panic=1 quiet\0" \
126 "mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0" \
127 "mmcboot=if run mmcload;then " \
128 "run mmcargs addcons addmisc;" \
130 "mmcload=mmc rescan;" \
131 "load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\
133 "mmcroot=/dev/mmcblk0p1\0" \
135 "nandargs=setenv bootargs ubi.mtd=1 " \
136 "root=ubi0:rootfs${ubiroot} rootfstype=ubifs\0" \
137 "nandboot=run mtdnand;ubi part nand0,0;" \
138 "ubi readvol ${kernel_addr_r} kernel${ubiroot};" \
139 "run nandargs addip addcons addmtd addmisc;" \
140 "bootm ${kernel_addr_r}\0" \
141 "net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};" \
142 "tftp ${fdt_addr_r} ${board_name}/${fdt_file};" \
143 "run nfsargs addip addcons addmtd addmisc;" \
144 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
145 "net_nfs_fit=tftp ${kernel_addr_r} ${board_name}/${fitfile};" \
146 "run nfsargs addip addcons addmtd addmisc;" \
147 "bootm ${kernel_addr_r}\0" \
148 "nfsargs=setenv bootargs root=/dev/nfs" \
149 " nfsroot=${serverip}:${nfsroot},v3 panic=1\0" \
150 "swupdate=setenv bootargs root=/dev/ram;" \
151 "run addip addcons addmtd addmisc;" \
153 "sf read ${kernel_addr_r} 120000 600000;" \
154 "sf read 14000000 730000 800000;" \
155 "bootm ${kernel_addr_r} 14000000\0"