816c571511f9b749c0abcee78c2661faeb717a64
[platform/kernel/u-boot.git] / include / configs / pengwyn.h
1 /*
2  * pengwyn.h
3  *
4  * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
5  *
6  * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc.
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 #ifndef __CONFIG_PENGWYN_H
12 #define __CONFIG_PENGWYN_H
13
14 #define CONFIG_NAND
15 #define CONFIG_SERIAL1
16 #define CONFIG_CONS_INDEX               1
17
18 #include <configs/ti_am335x_common.h>
19
20 /* Clock Defines */
21 #define V_OSCK                          24000000
22 #define V_SCLK                          V_OSCK
23
24 /* set env size */
25 #define CONFIG_ENV_SIZE                 0x4000
26
27 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
28
29 #ifndef CONFIG_SPL_BUILD
30 #define CONFIG_EXTRA_ENV_SETTINGS \
31         "loadaddr=0x80200000\0" \
32         "fdtaddr=0x80F80000\0" \
33         "bootpart=0:2\0" \
34         "bootdir=/boot\0" \
35         "bootfile=zImage\0" \
36         "fdtfile=am335x-pengwyn.dtb\0" \
37         "console=ttyO0,115200n8\0" \
38         "optargs=\0" \
39         "mmcdev=0\0" \
40         "mmcroot=/dev/mmcblk0p2 ro\0" \
41         "mmcrootfstype=ext4 rootwait\0" \
42         "rootpath=/export/rootfs\0" \
43         "nfsopts=nolock\0" \
44         "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
45                 "::off\0" \
46         "mmcargs=setenv bootargs console=${console} " \
47                 "${optargs} " \
48                 "root=${mmcroot} " \
49                 "rootfstype=${mmcrootfstype}\0" \
50         "netargs=setenv bootargs console=${console} " \
51                 "${optargs} " \
52                 "root=/dev/nfs " \
53                 "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
54                 "ip=dhcp\0" \
55         "bootenv=uEnv.txt\0" \
56         "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
57         "importbootenv=echo Importing environment from mmc ...; " \
58                 "env import -t $loadaddr $filesize\0" \
59         "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
60         "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
61         "mmcloados=run mmcargs; " \
62                 "bootz ${loadaddr} - ${fdtaddr};\0" \
63         "mmcboot=mmc dev ${mmcdev}; " \
64                 "if mmc rescan; then " \
65                         "echo SD/MMC found on device ${mmcdev};" \
66                         "if run loadbootenv; then " \
67                                 "echo Loaded environment from ${bootenv};" \
68                                 "run importbootenv;" \
69                         "fi;" \
70                         "if test -n $uenvcmd; then " \
71                                 "echo Running uenvcmd ...;" \
72                                 "run uenvcmd;" \
73                         "fi;" \
74                         "if run loadimage; then " \
75                                 "run loadfdt;" \
76                                 "run mmcloados;" \
77                         "fi;" \
78                 "fi;\0" \
79         "netboot=echo Booting from network ...; " \
80                 "setenv autoload no; " \
81                 "dhcp; " \
82                 "tftp ${loadaddr} ${bootfile}; " \
83                 "tftp ${fdtaddr} ${fdtfile}; " \
84                 "run netargs; " \
85                 "bootz ${loadaddr} - ${fdtaddr}\0" \
86         "mtdids=" MTDIDS_DEFAULT "\0" \
87         "mtdparts=" MTDPARTS_DEFAULT "\0" \
88         "nandargs=setenv bootargs console=${console} " \
89                 "${optargs} " \
90                 "root=${nandroot} " \
91                 "rootfstype=${nandrootfstype}\0" \
92         "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
93         "nandrootfstype=ubifs rootwait=1\0" \
94         "nandboot=echo Booting from nand ...; " \
95                 "run nandargs; " \
96                 "nand read ${fdtaddr} u-boot-spl-os; " \
97                 "nand read ${loadaddr} kernel; " \
98                 "bootz ${loadaddr} - ${fdtaddr}\0"
99 #endif
100
101 #define CONFIG_BOOTCOMMAND \
102         "run mmcboot;" \
103         "run nandboot;"
104
105 /* NS16550 Configuration: primary UART via FTDI */
106 #define CONFIG_SYS_NS16550_COM1         0x44e09000
107 #define CONFIG_BAUDRATE                 115200
108
109 /* I2C Configuration */
110 #define CONFIG_SYS_I2C_SPEED            100000
111 #define CONFIG_CMD_EEPROM
112 #define CONFIG_ENV_EEPROM_IS_ON_I2C
113 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
114 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
115
116 /* SPL */
117 #define CONFIG_SPL_POWER_SUPPORT
118 #define CONFIG_SPL_YMODEM_SUPPORT
119
120 /* General network SPL */
121 #define CONFIG_SPL_NET_SUPPORT
122 #define CONFIG_SPL_ENV_SUPPORT
123 #define CONFIG_SPL_NET_VCI_STRING       "AM335x U-Boot SPL"
124
125 /* NAND support */
126 #define CONFIG_CMD_NAND
127 #define CONFIG_NAND_OMAP_GPMC
128 #define CONFIG_NAND_OMAP_ELM
129
130 /* NAND Configuration. */
131 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
132 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
133                                          CONFIG_SYS_NAND_PAGE_SIZE)
134 #define CONFIG_SYS_NAND_PAGE_SIZE       4096
135 #define CONFIG_SYS_NAND_OOBSIZE         224
136 #define CONFIG_SYS_NAND_ONFI_DETECTION
137 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*4096)
138 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
139 #define CONFIG_SYS_NAND_ECCPOS          {   2,   3,   4,   5,   6,   7,   8,   9,  10,  11,  12,  13,  14,  15,  16,  17,\
140                                            18,  19,  20,  21,  22,  23,  24,  25,  26,  27,  28,  29,  30,  31,  32,  33,\
141                                            34,  35,  36,  37,  38,  39,  40,  41,  42,  43,  44,  45,  46,  47,  48,  49,\
142                                            50,  51,  52,  53,  54,  55,  56,  57,  58,  59,  60,  61,  62,  63,  64,  65,\
143                                            66,  67,  68,  69,  70,  71,  72,  73,  74,  75,  76,  77,  78,  79,  80,  81,\
144                                            82,  83,  84,  85,  86,  87,  88,  89,  90,  91,  92,  93,  94,  95,  96,  97,\
145                                            98,  99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113,\
146                                           114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133,\
147                                           134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153,\
148                                           154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173,\
149                                           174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193,\
150                                           194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209}
151
152 #define CONFIG_SYS_NAND_ECCSIZE         512
153 #define CONFIG_SYS_NAND_ECCBYTES        26
154 #define CONFIG_SYS_NAND_ECCSTEPS        8
155 #define CONFIG_SYS_NAND_ECCTOTAL        (CONFIG_SYS_NAND_ECCBYTES * \
156                                                 CONFIG_SYS_NAND_ECCSTEPS)
157 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH16_CODE_HW
158 /* END NAND Configuration. */
159
160 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
161 /* #define CONFIG_SYS_NAND_U_BOOT_OFFS  0x80000 */
162 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x200000
163
164 #define CONFIG_CMD_MTDPARTS
165
166 #define CONFIG_VERSION_VARIABLE /* monitor functions :  u-boot version */
167 #define CONFIG_CMD_DIAG /* monitor functions : Diagnostics */
168
169 #define MTDIDS_DEFAULT                  "nand0=omap2-nand.0"
170 /* Size must be a multiple of Nand erase size (524288 b) */
171 #define MTDPARTS_DEFAULT                "mtdparts=omap2-nand.0:512k(SPL)," \
172                                         "512k(SPL.backup1)," \
173                                         "512k(SPL.backup2)," \
174                                         "512k(SPL.backup3),1536k(u-boot)," \
175                                         "512k(u-boot-spl-os)," \
176                                         "512k(u-boot-env),5m(kernel),-(rootfs)"
177 #define CONFIG_ENV_IS_IN_NAND
178 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
179 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
180 /* NAND: SPL falcon mode configs */
181 #ifdef CONFIG_SPL_OS_BOOT
182 #define CONFIG_CMD_SPL_NAND_OFS         0x240000 /* un-assigned */
183 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
184 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
185 #endif
186
187 /*
188  * USB configuration.  We enable MUSB support, both for host and for
189  * gadget.  We set USB0 as peripheral and USB1 as host, based on the
190  * board schematic and physical port wired to each.  Then for host we
191  * add mass storage support.
192  */
193 #define CONFIG_USB_MUSB_DSPS
194 #define CONFIG_ARCH_MISC_INIT
195 #define CONFIG_USB_MUSB_PIO_ONLY
196 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
197 #define CONFIG_AM335X_USB0
198 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
199 #define CONFIG_AM335X_USB1
200 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
201
202 #if defined(CONFIG_USB_MUSB_HOST)
203 #define CONFIG_USB_STORAGE
204 #endif
205
206 #if defined(CONFIG_SPL_BUILD)
207 /* disable host part of MUSB in SPL */
208 /* Disable CPSW SPL support so we fit within the 101KiB limit. */
209 #undef CONFIG_SPL_ETH_SUPPORT
210 #endif
211
212 /* CPSW ethernet */
213 #define CONFIG_NET_MULTI
214
215 /* Network */
216 #define CONFIG_PHYLIB
217 #define CONFIG_PHY_RESET        1
218 #define CONFIG_PHY_NATSEMI
219 #define CONFIG_PHY_REALTEK
220
221 /* CPSW support */
222 #define CONFIG_SPL_ETH_SUPPORT
223
224 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/am33xx/u-boot-spl.lds"
225
226 #endif  /* ! __CONFIG_PENGWYN_H */