include/configs/pdu001.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * pdu001.h
   4  *
   5  * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
   6  *
   7  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   8  */
   9
  10 #ifndef __CONFIG_PDU001_H
  11 #define __CONFIG_PDU001_H
  12
  13 #include <configs/ti_am335x_common.h>
  14
  15 /* Using 32K of volatile storage for environment */
  16
  17 #define MACH_TYPE_PDU001        5075
  18 #define CONFIG_MACH_TYPE        MACH_TYPE_PDU001
  19
  20 /* Clock Defines */
  21 #define V_OSCK                  24000000  /* Clock output from T2 */
  22 #define V_SCLK                  (V_OSCK)
  23
  24 #if CONFIG_CONS_INDEX == 1
  25         #define CONSOLE_DEV "ttyO0"
  26 #elif CONFIG_CONS_INDEX == 2
  27         #define CONSOLE_DEV "ttyO1"
  28 #elif CONFIG_CONS_INDEX == 3
  29         #define CONSOLE_DEV "ttyO2"
  30 #elif CONFIG_CONS_INDEX == 4
  31         #define CONSOLE_DEV "ttyO3"
  32 #elif CONFIG_CONS_INDEX == 5
  33         #define CONSOLE_DEV "ttyO4"
  34 #elif CONFIG_CONS_INDEX == 6
  35         #define CONSOLE_DEV "ttyO5"
  36 #endif
  37
  38 #define CONFIG_BOOTCOMMAND \
  39         "run eval_boot_device;" \
  40         "part uuid mmc ${mmc_boot}:${root_fs_partition} root_fs_partuuid;" \
  41         "setenv bootargs console=${console} " \
  42         "vt.global_cursor_default=0 " \
  43         "root=PARTUUID=${root_fs_partuuid} " \
  44         "rootfstype=ext4 " \
  45         "rootwait " \
  46         "rootdelay=1;" \
  47         "fatload mmc ${mmc_boot} ${fdtaddr} ${fdtfile};" \
  48         "fatload mmc ${mmc_boot} ${loadaddr} ${bootfile};" \
  49         "bootz ${loadaddr} - ${fdtaddr}"
  50
  51 #ifndef CONFIG_SPL_BUILD
  52 #define CONFIG_EXTRA_ENV_SETTINGS \
  53         DEFAULT_LINUX_BOOT_ENV \
  54         "fdtfile=am335x-pdu001.dtb\0" \
  55         "bootfile=zImage\0" \
  56         "console=" CONSOLE_DEV ",115200n8\0" \
  57         "root_fs_partition=2\0" \
  58         "eval_boot_device=" \
  59                 "if test $boot_device = emmc; then " \
  60                         "setenv mmc_boot 0;" \
  61                 "elif test $boot_device = sdcard; then " \
  62                         "setenv mmc_boot 1;" \
  63                 "else " \
  64                         "echo Bootdevice is neither MMC0 nor MMC1;" \
  65                         "reset;" \
  66                 "fi;" \
  67         "\0"
  68 #endif
  69
  70 /* NS16550 Configuration */
  71 #define CONFIG_SYS_NS16550_COM1 UART0_BASE
  72 #define CONFIG_SYS_NS16550_COM2 UART1_BASE
  73 #define CONFIG_SYS_NS16550_COM3 UART2_BASE
  74 #define CONFIG_SYS_NS16550_COM4 UART3_BASE
  75 #define CONFIG_SYS_NS16550_COM5 UART4_BASE
  76 #define CONFIG_SYS_NS16550_COM6 UART5_BASE
  77
  78 #endif  /* ! __CONFIG_PDU001_H */