configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS
[platform/kernel/u-boot.git] / include / configs / pcm052.h
1 /*
2  * Copyright 2013 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the phytec PCM-052 SoM.
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #include <asm/arch/imx-regs.h>
13
14 #define CONFIG_SKIP_LOWLEVEL_INIT
15
16 /* Enable passing of ATAGs */
17 #define CONFIG_CMDLINE_TAG
18
19 /* Size of malloc() pool */
20 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
21
22 /* Allow to overwrite serial and ethaddr */
23 #define CONFIG_ENV_OVERWRITE
24
25 /* NAND support */
26 #define CONFIG_CMD_NAND
27 #define CONFIG_CMD_NAND_TRIMFFS
28 #define CONFIG_SYS_NAND_ONFI_DETECTION
29
30 #ifdef CONFIG_CMD_NAND
31 #define CONFIG_SYS_MAX_NAND_DEVICE      1
32 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
33
34 #define CONFIG_JFFS2_NAND
35
36 /* Dynamic MTD partition support */
37 #define CONFIG_MTD_PARTITIONS
38 #define CONFIG_MTD_DEVICE
39
40 #ifndef MTDIDS_DEFAULT
41 #define MTDIDS_DEFAULT                  "nand0=NAND"
42 #endif
43
44 #ifndef MTDPARTS_DEFAULT
45 #define MTDPARTS_DEFAULT                "mtdparts=NAND:640k(bootloader)"\
46                                         ",128k(env1)"\
47                                         ",128k(env2)"\
48                                         ",128k(dtb)"\
49                                         ",6144k(kernel)"\
50                                         ",-(root)"
51 #endif
52
53 #endif
54
55 #define CONFIG_FSL_ESDHC
56 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
57 #define CONFIG_SYS_FSL_ESDHC_NUM        1
58
59 /*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/
60
61 #define CONFIG_FEC_MXC
62 #define CONFIG_MII
63 #define IMX_FEC_BASE                    ENET_BASE_ADDR
64 #define CONFIG_FEC_XCV_TYPE             RMII
65 #define CONFIG_FEC_MXC_PHYADDR          0
66 #define CONFIG_PHYLIB
67 #define CONFIG_PHY_MICREL
68
69 /* QSPI Configs*/
70
71 #ifdef CONFIG_FSL_QSPI
72 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
73 #define FSL_QSPI_FLASH_NUM              2
74 #define CONFIG_SYS_FSL_QSPI_LE
75 #endif
76
77 /* I2C Configs */
78 #define CONFIG_SYS_I2C
79 #define CONFIG_SYS_I2C_MXC_I2C3
80 #define CONFIG_SYS_I2C_MXC
81
82 /* RTC (actually an RV-4162 but M41T62-compatible) */
83 #define CONFIG_RTC_M41T62
84 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
85 #define CONFIG_SYS_RTC_BUS_NUM 2
86
87 /* EEPROM (24FC256) */
88 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
89 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
90 #define CONFIG_SYS_I2C_EEPROM_BUS 2
91
92
93 #define CONFIG_LOADADDR                 0x82000000
94
95 /* We boot from the gfxRAM area of the OCRAM. */
96 #define CONFIG_SYS_TEXT_BASE            0x3f408000
97 #define CONFIG_BOARD_SIZE_LIMIT         524288
98
99 /* if no target-specific extra environment settings were defined by the
100    target, define an empty one */
101 #ifndef PCM052_EXTRA_ENV_SETTINGS
102 #define PCM052_EXTRA_ENV_SETTINGS
103 #endif
104
105 /* if no target-specific boot command was defined by the target,
106    define an empty one */
107 #ifndef PCM052_BOOTCOMMAND
108 #define PCM052_BOOTCOMMAND
109 #endif
110
111 /* if no target-specific extra environment settings were defined by the
112    target, define an empty one */
113 #ifndef PCM052_NET_INIT
114 #define PCM052_NET_INIT
115 #endif
116
117 /* boot command, including the target-defined one if any */
118 #define CONFIG_BOOTCOMMAND      PCM052_BOOTCOMMAND "run bootcmd_nand"
119
120 /* Extra env settings (including the target-defined ones if any) */
121 #define CONFIG_EXTRA_ENV_SETTINGS \
122         PCM052_EXTRA_ENV_SETTINGS \
123         "autoload=no\0" \
124         "fdt_high=0xffffffff\0" \
125         "initrd_high=0xffffffff\0" \
126         "blimg_file=u-boot.vyb\0" \
127         "blimg_addr=0x81000000\0" \
128         "kernel_file=zImage\0" \
129         "kernel_addr=0x82000000\0" \
130         "fdt_file=zImage.dtb\0" \
131         "fdt_addr=0x81000000\0" \
132         "ram_file=uRamdisk\0" \
133         "ram_addr=0x83000000\0" \
134         "filesys=rootfs.ubifs\0" \
135         "sys_addr=0x81000000\0" \
136         "tftploc=/path/to/tftp/directory/\0" \
137         "nfs_root=/path/to/nfs/root\0" \
138         "tftptimeout=1000\0" \
139         "tftptimeoutcountmax=1000000\0" \
140         "mtdparts=" MTDPARTS_DEFAULT "\0" \
141         "bootargs_base=setenv bootargs rw " \
142                 " mem=" __stringify(CONFIG_PCM052_DDR_SIZE) "M " \
143                 "console=ttyLP1,115200n8\0" \
144         "bootargs_sd=setenv bootargs ${bootargs} " \
145                 "root=/dev/mmcblk0p2 rootwait\0" \
146         "bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \
147                 "nfsroot=${serverip}:${nfs_root},v3,tcp\0" \
148         "bootargs_nand=setenv bootargs ${bootargs} " \
149                 "ubi.mtd=5 rootfstype=ubifs root=ubi0:rootfs\0" \
150         "bootargs_ram=setenv bootargs ${bootargs} " \
151                 "root=/dev/ram rw initrd=${ram_addr}\0" \
152         "bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
153         "bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \
154                 "fatload mmc 0:1 ${kernel_addr} ${kernel_file}; " \
155                 "fatload mmc 0:1 ${fdt_addr} ${fdt_file}; " \
156                 "bootz ${kernel_addr} - ${fdt_addr}\0" \
157         "bootcmd_net=run bootargs_base bootargs_net bootargs_mtd; " \
158                 "tftpboot ${kernel_addr} ${tftpdir}${kernel_file}; " \
159                 "tftpboot ${fdt_addr} ${tftpdir}${fdt_file}; " \
160                 "bootz ${kernel_addr} - ${fdt_addr}\0" \
161         "bootcmd_nand=run bootargs_base bootargs_nand bootargs_mtd; " \
162                 "nand read ${fdt_addr} dtb; " \
163                 "nand read ${kernel_addr} kernel; " \
164                 "bootz ${kernel_addr} - ${fdt_addr}\0" \
165         "bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \
166                 "nand read ${fdt_addr} dtb; " \
167                 "nand read ${kernel_addr} kernel; " \
168                 "nand read ${ram_addr} root; " \
169                 "bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
170         "update_bootloader_from_tftp=" PCM052_NET_INIT \
171                 "if tftp ${blimg_addr} "\
172                 "${tftpdir}${blimg_file}; then " \
173                 "mtdparts default; " \
174                 "nand erase.part bootloader; " \
175                 "nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
176         "update_kernel_from_sd=if fatload mmc 0:2 ${kernel_addr} " \
177                 "${kernel_file}; " \
178                 "then mtdparts default; " \
179                 "nand erase.part kernel; " \
180                 "nand write ${kernel_addr} kernel ${filesize}; " \
181                 "if fatload mmc 0:2 ${fdt_addr} ${fdt_file}; then " \
182                 "nand erase.part dtb; " \
183                 "nand write ${fdt_addr} dtb ${filesize}; fi\0" \
184         "update_kernel_from_tftp=" PCM052_NET_INIT \
185                 "if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \
186                 "then setenv fdtsize ${filesize}; " \
187                 "if tftp ${kernel_addr} ${tftpdir}${kernel_file}; then " \
188                 "mtdparts default; " \
189                 "nand erase.part dtb; " \
190                 "nand write ${fdt_addr} dtb ${fdtsize}; " \
191                 "nand erase.part kernel; " \
192                 "nand write ${kernel_addr} kernel ${filesize}; fi; fi\0" \
193         "update_rootfs_from_tftp=" PCM052_NET_INIT \
194                 "if tftp ${sys_addr} ${tftpdir}${filesys}; " \
195                 "then mtdparts default; " \
196                 "nand erase.part root; " \
197                 "ubi part root; " \
198                 "ubi create rootfs; " \
199                 "ubi write ${sys_addr} rootfs ${filesize}; fi\0" \
200         "update_ramdisk_from_tftp=" PCM052_NET_INIT \
201                 "if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
202                 "then mtdparts default; " \
203                 "nand erase.part root; " \
204                 "nand write ${ram_addr} root ${filesize}; fi\0"
205
206 /* Miscellaneous configurable options */
207 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
208 #define CONFIG_AUTO_COMPLETE
209 #define CONFIG_CMDLINE_EDITING
210 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
211 #define CONFIG_SYS_PBSIZE               \
212                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
213 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
214 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
215
216 #define CONFIG_SYS_MEMTEST_START        0x80010000
217 #define CONFIG_SYS_MEMTEST_END          0x87C00000
218
219 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
220
221 /* Physical memory map */
222 #define CONFIG_NR_DRAM_BANKS            1
223 #define PHYS_SDRAM                      (0x80000000)
224 #define PHYS_SDRAM_SIZE                 (CONFIG_PCM052_DDR_SIZE * 1024 * 1024)
225
226 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
227 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
228 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
229
230 #define CONFIG_SYS_INIT_SP_OFFSET \
231         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
232 #define CONFIG_SYS_INIT_SP_ADDR \
233         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
234
235 /* environment organization */
236 #ifdef CONFIG_ENV_IS_IN_MMC
237 #define CONFIG_ENV_SIZE                 (8 * 1024)
238
239 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
240 #define CONFIG_SYS_MMC_ENV_DEV          0
241 #endif
242
243 #ifdef CONFIG_ENV_IS_IN_NAND
244 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
245 #define CONFIG_ENV_SIZE                 (8 * 1024)
246 #define CONFIG_ENV_OFFSET               0xA0000
247 #define CONFIG_ENV_SIZE_REDUND          (8 * 1024)
248 #define CONFIG_ENV_OFFSET_REDUND        0xC0000
249 #endif
250
251 #endif