include/configs/pcl063_ull.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Board configuration file for Phytec phyBOARD-i.MX6ULL-Segin SBC
   4  * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
   5  *
   6  * Based on include/configs/xpress.h:
   7  * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
   8  */
   9 #ifndef __PCL063_ULL_H
  10 #define __PCL063_ULL_H
  11
  12 #include <linux/sizes.h>
  13 #include <linux/stringify.h>
  14 #include "mx6_common.h"
  15
  16 /* SPL options */
  17 #include "imx6_spl.h"
  18
  19 #define CONFIG_SYS_FSL_USDHC_NUM        2
  20
  21 /* Environment settings */
  22
  23 /* Environment in SD */
  24 #define MMC_ROOTFS_DEV          0
  25 #define MMC_ROOTFS_PART         2
  26
  27 /* Console configs */
  28 #define CONFIG_MXC_UART_BASE            UART1_BASE
  29
  30 /* MMC Configs */
  31
  32 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  33
  34 /* I2C configs */
  35
  36 /* Miscellaneous configurable options */
  37
  38 /* Physical Memory Map */
  39 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  40 #define PHYS_SDRAM_SIZE                 SZ_256M
  41
  42 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  43 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  44 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  45
  46 #define CONFIG_SYS_INIT_SP_OFFSET \
  47         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  48 #define CONFIG_SYS_INIT_SP_ADDR \
  49         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  50
  51 /* NAND */
  52 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  53 #define CONFIG_SYS_NAND_BASE            0x40000000
  54
  55 /* USB Configs */
  56 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  57 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  58 #define CONFIG_MXC_USB_FLAGS            0
  59 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  60
  61 #define ENV_MMC \
  62         "mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \
  63         "mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \
  64         "fitpart=1\0" \
  65         "bootdelay=3\0" \
  66         "silent=1\0" \
  67         "optargs=rw rootwait\0" \
  68         "mmcautodetect=yes\0" \
  69         "mmcrootfstype=ext4\0" \
  70         "mmcfit_name=fitImage\0" \
  71         "mmcloadfit=fatload mmc ${mmcdev}:${fitpart} ${fit_addr} " \
  72                     "${mmcfit_name}\0" \
  73         "mmcargs=setenv bootargs " \
  74                 "root=/dev/mmcblk${mmcdev}p${mmcpart} ${optargs} " \
  75                 "console=${console} rootfstype=${mmcrootfstype}\0" \
  76         "mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \
  77
  78 /* Default environment */
  79 #define CONFIG_EXTRA_ENV_SETTINGS \
  80         "fdt_high=0xffffffff\0" \
  81         "console=ttymxc0,115200n8\0" \
  82         "addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
  83         "fit_addr=0x82000000\0" \
  84         ENV_MMC
  85
  86 #define BOOT_TARGET_DEVICES(func) \
  87         func(MMC, mmc, 0) \
  88         func(MMC, mmc, 1) \
  89         func(DHCP, dhcp, na)
  90
  91 #include <config_distro_bootcmd.h>
  92
  93 #endif /* __PCL063_ULL_H */