1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2010-2011 Freescale Semiconductor, Inc.
8 * QorIQ RDB boards configuration file
13 #include <linux/stringify.h>
15 #if defined(CONFIG_TARGET_P1020RDB_PC)
16 #define CONFIG_VSC7385_ENET
18 #define __SW_BOOT_MASK 0x03
19 #define __SW_BOOT_NOR 0x5c
20 #define __SW_BOOT_SPI 0x1c
21 #define __SW_BOOT_SD 0x9c
22 #define __SW_BOOT_NAND 0xec
23 #define __SW_BOOT_PCIE 0x6c
24 #define __SW_NOR_BANK_MASK 0xfd
25 #define __SW_NOR_BANK_UP 0x00
26 #define __SW_NOR_BANK_LO 0x02
27 #define CONFIG_SYS_L2_SIZE (256 << 10)
31 * P1020RDB-PD board has user selectable switches for evaluating different
32 * frequency and boot options for the P1020 device. The table that
33 * follow describe the available options. The front six binary number was in
34 * accordance with SW3[1:6].
35 * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off
36 * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off
37 * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off
38 * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off
39 * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off
40 * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off
41 * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
43 #if defined(CONFIG_TARGET_P1020RDB_PD)
44 #define CONFIG_VSC7385_ENET
46 #define __SW_BOOT_MASK 0x03
47 #define __SW_BOOT_NOR 0x64
48 #define __SW_BOOT_SPI 0x34
49 #define __SW_BOOT_SD 0x24
50 #define __SW_BOOT_NAND 0x44
51 #define __SW_BOOT_PCIE 0x74
52 #define __SW_NOR_BANK_MASK 0xfd
53 #define __SW_NOR_BANK_UP 0x00
54 #define __SW_NOR_BANK_LO 0x02
55 #define CONFIG_SYS_L2_SIZE (256 << 10)
57 * Dynamic MTD Partition support with mtdparts
61 #if defined(CONFIG_TARGET_P2020RDB)
62 #define CONFIG_VSC7385_ENET
63 #define __SW_BOOT_MASK 0x03
64 #define __SW_BOOT_NOR 0xc8
65 #define __SW_BOOT_SPI 0x28
66 #define __SW_BOOT_SD 0x68
67 #define __SW_BOOT_SD2 0x18
68 #define __SW_BOOT_NAND 0xe8
69 #define __SW_BOOT_PCIE 0xa8
70 #define __SW_NOR_BANK_MASK 0xfd
71 #define __SW_NOR_BANK_UP 0x00
72 #define __SW_NOR_BANK_LO 0x02
73 #define CONFIG_SYS_L2_SIZE (512 << 10)
75 * Dynamic MTD Partition support with mtdparts
80 #define CONFIG_SPL_FLUSH_IMAGE
81 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
82 #define CONFIG_SPL_PAD_TO 0x20000
83 #define CONFIG_SPL_MAX_SIZE (128 * 1024)
84 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10)
85 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000)
86 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000)
87 #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10)
88 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
89 #ifdef CONFIG_SPL_BUILD
90 #define CONFIG_SPL_COMMON_INIT_DDR
92 #elif defined(CONFIG_SPIFLASH)
93 #define CONFIG_SPL_SPI_FLASH_MINIMAL
94 #define CONFIG_SPL_FLUSH_IMAGE
95 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
96 #define CONFIG_SPL_PAD_TO 0x20000
97 #define CONFIG_SPL_MAX_SIZE (128 * 1024)
98 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)
99 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000)
100 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000)
101 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10)
102 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
103 #ifdef CONFIG_SPL_BUILD
104 #define CONFIG_SPL_COMMON_INIT_DDR
106 #elif defined(CONFIG_MTD_RAW_NAND)
107 #ifdef CONFIG_TPL_BUILD
108 #define CONFIG_SPL_FLUSH_IMAGE
109 #define CONFIG_SPL_NAND_INIT
110 #define CONFIG_SPL_COMMON_INIT_DDR
111 #define CONFIG_SPL_MAX_SIZE (128 << 10)
112 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
113 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10)
114 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000)
115 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000)
116 #elif defined(CONFIG_SPL_BUILD)
117 #define CONFIG_SPL_INIT_MINIMAL
118 #define CONFIG_SPL_FLUSH_IMAGE
119 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
120 #define CONFIG_SPL_MAX_SIZE 4096
121 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10)
122 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000
123 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000
125 #ifndef CONFIG_MPC85XX_HAVE_RESET_VECTOR
126 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
128 #endif /* not CONFIG_TPL_BUILD */
130 #define CONFIG_SPL_PAD_TO 0x20000
131 #define CONFIG_TPL_PAD_TO 0x20000
132 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
135 #ifndef CONFIG_RESET_VECTOR_ADDRESS
136 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
139 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
140 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
144 #define CONFIG_HWCONFIG
146 * These can be toggled for performance analysis, otherwise use default.
148 #define CONFIG_L2_CACHE
150 #define CONFIG_ENABLE_36BIT_PHYS
152 #define CONFIG_SYS_CCSRBAR 0xffe00000
153 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
155 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
157 #ifdef CONFIG_SPL_BUILD
158 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
162 #define CONFIG_SYS_DDR_RAW_TIMING
163 #define CONFIG_SYS_SPD_BUS_NUM 1
164 #define SPD_EEPROM_ADDRESS 0x52
166 #if defined(CONFIG_TARGET_P1020RDB_PD)
167 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G
169 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G
171 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
172 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
173 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
175 /* Default settings for DDR3 */
176 #ifndef CONFIG_TARGET_P2020RDB
177 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
178 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
179 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
180 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f
181 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302
182 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000
184 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
185 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
186 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
187 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
189 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
190 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608
191 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000
192 #define CONFIG_SYS_DDR_RCW_1 0x00000000
193 #define CONFIG_SYS_DDR_RCW_2 0x00000000
194 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
195 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050
196 #define CONFIG_SYS_DDR_TIMING_4 0x00220001
197 #define CONFIG_SYS_DDR_TIMING_5 0x03402400
199 #define CONFIG_SYS_DDR_TIMING_3 0x00020000
200 #define CONFIG_SYS_DDR_TIMING_0 0x00330004
201 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846
202 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF
203 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000
204 #define CONFIG_SYS_DDR_MODE_1 0x40461520
205 #define CONFIG_SYS_DDR_MODE_2 0x8000c000
206 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000
212 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable
213 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3)
214 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1
215 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable
217 * 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0
218 * 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2
219 * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3
220 * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2
221 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
222 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable
223 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
227 * Local Bus Definitions
229 #if defined(CONFIG_TARGET_P1020RDB_PD)
230 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */
231 #define CONFIG_SYS_FLASH_BASE 0xec000000
233 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */
234 #define CONFIG_SYS_FLASH_BASE 0xef000000
237 #ifdef CONFIG_PHYS_64BIT
238 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
240 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
243 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
246 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
248 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
249 #define CONFIG_SYS_FLASH_QUIET_TEST
250 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
252 #undef CONFIG_SYS_FLASH_CHECKSUM
253 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
254 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
256 #define CONFIG_SYS_FLASH_EMPTY_INFO
259 #ifdef CONFIG_NAND_FSL_ELBC
260 #define CONFIG_SYS_NAND_BASE 0xff800000
261 #ifdef CONFIG_PHYS_64BIT
262 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull
264 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
267 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
268 #define CONFIG_SYS_MAX_NAND_DEVICE 1
270 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
271 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
272 | BR_PS_8 /* Port Size = 8 bit */ \
273 | BR_MS_FCM /* MSEL = FCM */ \
275 #if defined(CONFIG_TARGET_P1020RDB_PD)
276 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \
277 | OR_FCM_PGS /* Large Page*/ \
285 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \
293 #endif /* CONFIG_NAND_FSL_ELBC */
295 #define CONFIG_SYS_INIT_RAM_LOCK
296 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
297 #ifdef CONFIG_PHYS_64BIT
298 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
299 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
300 /* The assembler doesn't like typecast */
301 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
302 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
303 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
305 /* Initial L1 address */
306 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
307 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
308 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
310 /* Size of used area in RAM */
311 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
313 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
314 GENERATED_GBL_DATA_SIZE)
315 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
317 #define CONFIG_SYS_MONITOR_LEN (768 * 1024)
319 #define CONFIG_SYS_CPLD_BASE 0xffa00000
320 #ifdef CONFIG_PHYS_64BIT
321 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull
323 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
325 /* CPLD config size: 1Mb */
327 #define CONFIG_SYS_PMC_BASE 0xff980000
328 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE
329 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
331 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
332 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
336 #ifdef CONFIG_VSC7385_ENET
337 #define __VSCFW_ADDR "vscfw_addr=ef000000\0"
338 #define CONFIG_SYS_VSC7385_BASE 0xffb00000
340 #ifdef CONFIG_PHYS_64BIT
341 #define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull
343 #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE
346 #define CONFIG_SYS_VSC7385_BR_PRELIM \
347 (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V)
348 #define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \
349 OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \
350 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
352 /* The size of the VSC7385 firmware image */
353 #define CONFIG_VSC7385_IMAGE_SIZE 8192
357 #define __VSCFW_ADDR ""
361 * Config the L2 Cache as L2 SRAM
363 #if defined(CONFIG_SPL_BUILD)
364 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
365 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
366 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
367 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
368 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000
369 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
370 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
371 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
372 #if defined(CONFIG_TARGET_P2020RDB)
373 #define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10)
375 #define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10)
377 #elif defined(CONFIG_MTD_RAW_NAND)
378 #ifdef CONFIG_TPL_BUILD
379 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
380 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
381 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
382 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000
383 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
384 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
385 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10)
386 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
388 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
389 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
390 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
391 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000)
392 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
393 #endif /* CONFIG_TPL_BUILD */
397 /* Serial Port - controlled on board with jumper J8
401 #undef CONFIG_SERIAL_SOFTWARE_FIFO
402 #define CONFIG_SYS_NS16550_SERIAL
403 #define CONFIG_SYS_NS16550_REG_SIZE 1
404 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
405 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
406 #define CONFIG_NS16550_MIN_FUNCTIONS
409 #define CONFIG_SYS_BAUDRATE_TABLE \
410 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
412 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
413 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
416 #if !CONFIG_IS_ENABLED(DM_I2C)
417 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} }
420 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */
426 #define CONFIG_RTC_PT7C4338
427 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
428 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18
430 /* enable read and write access to EEPROM */
432 #if defined(CONFIG_PCI)
435 * Memory space is mapped 1-1, but I/O space must start from 0.
438 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
439 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
440 #ifdef CONFIG_PHYS_64BIT
441 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
443 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
445 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
446 #ifdef CONFIG_PHYS_64BIT
447 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull
449 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
452 /* controller 1, Slot 2, tgtid 1, Base address a000 */
453 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
454 #ifdef CONFIG_PHYS_64BIT
455 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
457 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
459 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
460 #ifdef CONFIG_PHYS_64BIT
461 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull
463 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
466 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
467 #endif /* CONFIG_PCI */
469 #if defined(CONFIG_TSEC_ENET)
471 #define CONFIG_TSEC1_NAME "eTSEC1"
473 #define CONFIG_TSEC2_NAME "eTSEC2"
475 #define CONFIG_TSEC3_NAME "eTSEC3"
477 #define TSEC1_PHY_ADDR 2
478 #define TSEC2_PHY_ADDR 0
479 #define TSEC3_PHY_ADDR 1
481 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
482 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
483 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
485 #define TSEC1_PHYIDX 0
486 #define TSEC2_PHYIDX 0
487 #define TSEC3_PHYIDX 0
488 #endif /* CONFIG_TSEC_ENET */
493 #if defined(CONFIG_SDCARD)
494 #define CONFIG_FSL_FIXED_MMC_LOCATION
495 #elif defined(CONFIG_MTD_RAW_NAND)
496 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
497 #ifdef CONFIG_TPL_BUILD
498 #define SPL_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
500 #elif defined(CONFIG_SYS_RAMBOOT)
501 #define SPL_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
504 #define CONFIG_LOADS_ECHO /* echo on for serial download */
505 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
510 #define CONFIG_HAS_FSL_DR_USB
512 #if defined(CONFIG_HAS_FSL_DR_USB)
513 #ifdef CONFIG_USB_EHCI_HCD
514 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
518 #if defined(CONFIG_TARGET_P1020RDB_PD)
519 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
523 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
527 * Miscellaneous configurable options
531 * For booting Linux, the board info and command line data
532 * have to be in the first 64 MB of memory, since this is
533 * the maximum mapped by the Linux kernel during initialization.
535 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/
536 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
539 * Environment Configuration
541 #define CONFIG_HOSTNAME "unknown"
542 #define CONFIG_ROOTPATH "/opt/nfsroot"
543 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
546 #define __NOR_RST_CMD \
547 norboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_NOR 1; \
548 i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
551 #define __SPI_RST_CMD \
552 spiboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_SPI 1; \
553 i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
556 #define __SD_RST_CMD \
557 sdboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_SD 1; \
558 i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
560 #ifdef __SW_BOOT_NAND
561 #define __NAND_RST_CMD \
562 nandboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_NAND 1; \
563 i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
565 #ifdef __SW_BOOT_PCIE
566 #define __PCIE_RST_CMD \
567 pciboot=i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 __SW_BOOT_PCIE 1; \
568 i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 __SW_BOOT_MASK 1; reset
571 #define CONFIG_EXTRA_ENV_SETTINGS \
573 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
574 "loadaddr=1000000\0" \
575 "bootfile=uImage\0" \
576 "tftpflash=tftpboot $loadaddr $uboot; " \
577 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
578 "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
579 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
580 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
581 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
582 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \
583 "consoledev=ttyS0\0" \
584 "ramdiskaddr=2000000\0" \
585 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
586 "fdtaddr=1e00000\0" \
588 "jffs2nor=mtdblock3\0" \
589 "norbootaddr=ef080000\0" \
590 "norfdtaddr=ef040000\0" \
591 "jffs2nand=mtdblock9\0" \
592 "nandbootaddr=100000\0" \
593 "nandfdtaddr=80000\0" \
594 "ramdisk_size=120000\0" \
596 "map_lowernorbank=i2c dev "__stringify(CONFIG_SYS_SPD_BUS_NUM)"; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 1 "__stringify(__SW_NOR_BANK_LO)" 1; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 3 "__stringify(__SW_NOR_BANK_MASK)" 1\0" \
597 "map_uppernorbank=i2c dev "__stringify(CONFIG_SYS_SPD_BUS_NUM)"; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 1 "__stringify(__SW_NOR_BANK_UP)" 1; i2c mw "__stringify(CONFIG_SYS_I2C_PCA9557_ADDR)" 3 "__stringify(__SW_NOR_BANK_MASK)" 1\0" \
598 __stringify(__NOR_RST_CMD)"\0" \
599 __stringify(__SPI_RST_CMD)"\0" \
600 __stringify(__SD_RST_CMD)"\0" \
601 __stringify(__NAND_RST_CMD)"\0" \
602 __stringify(__PCIE_RST_CMD)"\0"
604 #define CONFIG_USB_FAT_BOOT \
605 "setenv bootargs root=/dev/ram rw " \
606 "console=$consoledev,$baudrate $othbootargs " \
607 "ramdisk_size=$ramdisk_size;" \
609 "fatload usb 0:2 $loadaddr $bootfile;" \
610 "fatload usb 0:2 $fdtaddr $fdtfile;" \
611 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
612 "bootm $loadaddr $ramdiskaddr $fdtaddr"
614 #define CONFIG_USB_EXT2_BOOT \
615 "setenv bootargs root=/dev/ram rw " \
616 "console=$consoledev,$baudrate $othbootargs " \
617 "ramdisk_size=$ramdisk_size;" \
619 "ext2load usb 0:4 $loadaddr $bootfile;" \
620 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
621 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
622 "bootm $loadaddr $ramdiskaddr $fdtaddr"
624 #define CONFIG_NORBOOT \
625 "setenv bootargs root=/dev/$jffs2nor rw " \
626 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \
627 "bootm $norbootaddr - $norfdtaddr"
629 #endif /* __CONFIG_H */