2 * Copyright 2010-2011 Freescale Semiconductor, Inc.
4 * SPDX-License-Identifier: GPL-2.0+
8 * QorIQ RDB boards configuration file
14 #define CONFIG_PHYS_64BIT
17 #if defined(CONFIG_P1020MBG)
18 #define CONFIG_BOARDNAME "P1020MBG-PC"
20 #define CONFIG_VSC7385_ENET
22 #define __SW_BOOT_MASK 0x03
23 #define __SW_BOOT_NOR 0xe4
24 #define __SW_BOOT_SD 0x54
25 #define CONFIG_SYS_L2_SIZE (256 << 10)
28 #if defined(CONFIG_P1020UTM)
29 #define CONFIG_BOARDNAME "P1020UTM-PC"
31 #define __SW_BOOT_MASK 0x03
32 #define __SW_BOOT_NOR 0xe0
33 #define __SW_BOOT_SD 0x50
34 #define CONFIG_SYS_L2_SIZE (256 << 10)
37 #if defined(CONFIG_P1020RDB)
38 #define CONFIG_BOARDNAME "P1020RDB-PC"
39 #define CONFIG_NAND_FSL_ELBC
41 #define CONFIG_SPI_FLASH
42 #define CONFIG_VSC7385_ENET
44 #define __SW_BOOT_MASK 0x03
45 #define __SW_BOOT_NOR 0x5c
46 #define __SW_BOOT_SPI 0x1c
47 #define __SW_BOOT_SD 0x9c
48 #define __SW_BOOT_NAND 0xec
49 #define __SW_BOOT_PCIE 0x6c
50 #define CONFIG_SYS_L2_SIZE (256 << 10)
53 #if defined(CONFIG_P1021RDB)
54 #define CONFIG_BOARDNAME "P1021RDB-PC"
55 #define CONFIG_NAND_FSL_ELBC
58 #define CONFIG_SPI_FLASH
59 #define CONFIG_VSC7385_ENET
60 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of
61 addresses in the LBC */
62 #define __SW_BOOT_MASK 0x03
63 #define __SW_BOOT_NOR 0x5c
64 #define __SW_BOOT_SPI 0x1c
65 #define __SW_BOOT_SD 0x9c
66 #define __SW_BOOT_NAND 0xec
67 #define __SW_BOOT_PCIE 0x6c
68 #define CONFIG_SYS_L2_SIZE (256 << 10)
71 #if defined(CONFIG_P1024RDB)
72 #define CONFIG_BOARDNAME "P1024RDB"
73 #define CONFIG_NAND_FSL_ELBC
76 #define CONFIG_SPI_FLASH
77 #define __SW_BOOT_MASK 0xf3
78 #define __SW_BOOT_NOR 0x00
79 #define __SW_BOOT_SPI 0x08
80 #define __SW_BOOT_SD 0x04
81 #define __SW_BOOT_NAND 0x0c
82 #define CONFIG_SYS_L2_SIZE (256 << 10)
85 #if defined(CONFIG_P1025RDB)
86 #define CONFIG_BOARDNAME "P1025RDB"
87 #define CONFIG_NAND_FSL_ELBC
91 #define CONFIG_SPI_FLASH
93 #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Implement conversion of
94 addresses in the LBC */
95 #define __SW_BOOT_MASK 0xf3
96 #define __SW_BOOT_NOR 0x00
97 #define __SW_BOOT_SPI 0x08
98 #define __SW_BOOT_SD 0x04
99 #define __SW_BOOT_NAND 0x0c
100 #define CONFIG_SYS_L2_SIZE (256 << 10)
103 #if defined(CONFIG_P2020RDB)
104 #define CONFIG_BOARDNAME "P2020RDB-PCA"
105 #define CONFIG_NAND_FSL_ELBC
107 #define CONFIG_SPI_FLASH
108 #define CONFIG_VSC7385_ENET
109 #define __SW_BOOT_MASK 0x03
110 #define __SW_BOOT_NOR 0xc8
111 #define __SW_BOOT_SPI 0x28
112 #define __SW_BOOT_SD 0x68 /* or 0x18 */
113 #define __SW_BOOT_NAND 0xe8
114 #define __SW_BOOT_PCIE 0xa8
115 #define CONFIG_SYS_L2_SIZE (512 << 10)
118 #if CONFIG_SYS_L2_SIZE >= (512 << 10)
120 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
121 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
122 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
126 #define CONFIG_RAMBOOT_SDCARD
127 #define CONFIG_SYS_RAMBOOT
128 #define CONFIG_SYS_EXTRA_ENV_RELOC
129 #define CONFIG_SYS_TEXT_BASE 0x11000000
130 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
133 #ifdef CONFIG_SPIFLASH
134 #define CONFIG_RAMBOOT_SPIFLASH
135 #define CONFIG_SYS_RAMBOOT
136 #define CONFIG_SYS_EXTRA_ENV_RELOC
137 #define CONFIG_SYS_TEXT_BASE 0x11000000
138 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
143 #define CONFIG_SPL_INIT_MINIMAL
144 #define CONFIG_SPL_SERIAL_SUPPORT
145 #define CONFIG_SPL_NAND_SUPPORT
146 #define CONFIG_SPL_NAND_MINIMAL
147 #define CONFIG_SPL_FLUSH_IMAGE
148 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
150 #define CONFIG_SPL_TEXT_BASE 0xfffff000
151 #define CONFIG_SPL_MAX_SIZE 4096
153 #ifdef CONFIG_SYS_INIT_L2_ADDR
154 /* We multiply CONFIG_SPL_MAX_SIZE by two to leave some room for BSS. */
155 #define CONFIG_SYS_TEXT_BASE 0xf8f82000
156 #define CONFIG_SPL_RELOC_TEXT_BASE \
157 (CONFIG_SYS_INIT_L2_END - CONFIG_SPL_MAX_SIZE * 2)
158 #define CONFIG_SPL_RELOC_STACK \
159 (CONFIG_SYS_INIT_L2_END - CONFIG_SPL_MAX_SIZE * 2)
160 #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR)
161 #define CONFIG_SYS_NAND_U_BOOT_START \
162 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SPL_MAX_SIZE)
164 #define CONFIG_SYS_TEXT_BASE 0x00201000
165 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
166 #define CONFIG_SPL_RELOC_STACK 0x00100000
167 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
168 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
171 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000)
172 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0
173 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
176 #ifndef CONFIG_SYS_TEXT_BASE
177 #define CONFIG_SYS_TEXT_BASE 0xeff80000
180 #ifndef CONFIG_RESET_VECTOR_ADDRESS
181 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
184 #ifndef CONFIG_SYS_MONITOR_BASE
185 #ifdef CONFIG_SPL_BUILD
186 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
188 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
192 /* High Level Configuration Options */
195 #define CONFIG_MPC85xx
199 #define CONFIG_FSL_ELBC
201 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
202 #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
203 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
204 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
205 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
206 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
208 #define CONFIG_FSL_LAW
209 #define CONFIG_TSEC_ENET /* tsec ethernet support */
210 #define CONFIG_ENV_OVERWRITE
212 #define CONFIG_CMD_SATA
213 #define CONFIG_SATA_SIL
214 #define CONFIG_SYS_SATA_MAX_DEVICE 2
215 #define CONFIG_LIBATA
218 #if defined(CONFIG_P2020RDB)
219 #define CONFIG_SYS_CLK_FREQ 100000000
221 #define CONFIG_SYS_CLK_FREQ 66666666
223 #define CONFIG_DDR_CLK_FREQ 66666666
225 #define CONFIG_HWCONFIG
227 * These can be toggled for performance analysis, otherwise use default.
229 #define CONFIG_L2_CACHE
232 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */
234 #define CONFIG_ENABLE_36BIT_PHYS
236 #ifdef CONFIG_PHYS_64BIT
237 #define CONFIG_ADDR_MAP 1
238 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
241 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
242 #define CONFIG_SYS_MEMTEST_END 0x1fffffff
243 #define CONFIG_PANIC_HANG /* do not reset board on panic */
245 #define CONFIG_SYS_CCSRBAR 0xffe00000
246 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
248 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
250 #ifdef CONFIG_SPL_BUILD
251 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
255 #define CONFIG_FSL_DDR3
256 #define CONFIG_SYS_DDR_RAW_TIMING
257 #define CONFIG_DDR_SPD
258 #define CONFIG_SYS_SPD_BUS_NUM 1
259 #define SPD_EEPROM_ADDRESS 0x52
260 #undef CONFIG_FSL_DDR_INTERACTIVE
262 #ifdef CONFIG_P1020MBG
263 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G
264 #define CONFIG_CHIP_SELECTS_PER_CTRL 2
266 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G
267 #define CONFIG_CHIP_SELECTS_PER_CTRL 1
269 #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
270 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
271 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
273 #define CONFIG_NUM_DDR_CONTROLLERS 1
274 #define CONFIG_DIMM_SLOTS_PER_CTLR 1
276 /* Default settings for DDR3 */
277 #ifndef CONFIG_P2020RDB
278 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
279 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
280 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
281 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f
282 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302
283 #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000
285 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
286 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
287 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
288 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
290 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
291 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608
292 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000
293 #define CONFIG_SYS_DDR_RCW_1 0x00000000
294 #define CONFIG_SYS_DDR_RCW_2 0x00000000
295 #define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
296 #define CONFIG_SYS_DDR_CONTROL_2 0x04401050
297 #define CONFIG_SYS_DDR_TIMING_4 0x00220001
298 #define CONFIG_SYS_DDR_TIMING_5 0x03402400
300 #define CONFIG_SYS_DDR_TIMING_3 0x00020000
301 #define CONFIG_SYS_DDR_TIMING_0 0x00330004
302 #define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846
303 #define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF
304 #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000
305 #define CONFIG_SYS_DDR_MODE_1 0x40461520
306 #define CONFIG_SYS_DDR_MODE_2 0x8000c000
307 #define CONFIG_SYS_DDR_INTERVAL 0x0C300000
310 #undef CONFIG_CLOCKS_IN_MHZ
315 * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable
316 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3)
317 * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1
318 * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 512K cacheable
320 * 0xff80_0000 0xff80_7fff NAND flash 32K non-cacheable CS1/0
321 * 0xff98_0000 0xff98_ffff PMC 64K non-cacheable CS2
322 * 0xffa0_0000 0xffaf_ffff CPLD 1M non-cacheable CS3
323 * 0xffb0_0000 0xffbf_ffff VSC7385 switch 1M non-cacheable CS2
324 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
325 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable
326 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
331 * Local Bus Definitions
333 #if defined(CONFIG_P1020MBG)
334 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */
335 #define CONFIG_SYS_FLASH_BASE 0xec000000
336 #elif defined(CONFIG_P1020UTM)
337 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */
338 #define CONFIG_SYS_FLASH_BASE 0xee000000
340 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* 16M */
341 #define CONFIG_SYS_FLASH_BASE 0xef000000
345 #ifdef CONFIG_PHYS_64BIT
346 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
348 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
351 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
354 #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
356 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
357 #define CONFIG_SYS_FLASH_QUIET_TEST
358 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
360 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
362 #undef CONFIG_SYS_FLASH_CHECKSUM
363 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
364 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
366 #define CONFIG_FLASH_CFI_DRIVER
367 #define CONFIG_SYS_FLASH_CFI
368 #define CONFIG_SYS_FLASH_EMPTY_INFO
369 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
372 #ifdef CONFIG_NAND_FSL_ELBC
373 #define CONFIG_SYS_NAND_BASE 0xff800000
374 #ifdef CONFIG_PHYS_64BIT
375 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull
377 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
380 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
381 #define CONFIG_SYS_MAX_NAND_DEVICE 1
382 #define CONFIG_MTD_NAND_VERIFY_WRITE
383 #define CONFIG_CMD_NAND
384 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024)
386 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
387 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
388 | BR_PS_8 /* Port Size = 8 bit */ \
389 | BR_MS_FCM /* MSEL = FCM */ \
391 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \
398 #endif /* CONFIG_NAND_FSL_ELBC */
400 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
402 #define CONFIG_SYS_INIT_RAM_LOCK
403 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
404 #ifdef CONFIG_PHYS_64BIT
405 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
406 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
407 /* The assembler doesn't like typecast */
408 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
409 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
410 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
412 /* Initial L1 address */
413 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
414 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
415 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
417 /* Size of used area in RAM */
418 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
420 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
421 GENERATED_GBL_DATA_SIZE)
422 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
424 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */
425 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */
427 #define CONFIG_SYS_CPLD_BASE 0xffa00000
428 #ifdef CONFIG_PHYS_64BIT
429 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull
431 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
433 /* CPLD config size: 1Mb */
434 #define CONFIG_CPLD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \
436 #define CONFIG_CPLD_OR_PRELIM (0xfff009f7)
438 #define CONFIG_SYS_PMC_BASE 0xff980000
439 #define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE
440 #define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
442 #define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
443 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
447 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
448 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
449 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
450 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
452 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
453 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
454 #ifdef CONFIG_NAND_FSL_ELBC
455 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
456 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
459 #define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */
460 #define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */
464 #ifdef CONFIG_VSC7385_ENET
465 #define CONFIG_SYS_VSC7385_BASE 0xffb00000
467 #ifdef CONFIG_PHYS_64BIT
468 #define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull
470 #define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE
473 #define CONFIG_SYS_VSC7385_BR_PRELIM \
474 (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V)
475 #define CONFIG_SYS_VSC7385_OR_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | \
476 OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \
477 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
479 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM
480 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM
482 /* The size of the VSC7385 firmware image */
483 #define CONFIG_VSC7385_IMAGE_SIZE 8192
486 /* Serial Port - controlled on board with jumper J8
490 #define CONFIG_CONS_INDEX 1
491 #undef CONFIG_SERIAL_SOFTWARE_FIFO
492 #define CONFIG_SYS_NS16550
493 #define CONFIG_SYS_NS16550_SERIAL
494 #define CONFIG_SYS_NS16550_REG_SIZE 1
495 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
496 #ifdef CONFIG_SPL_BUILD
497 #define CONFIG_NS16550_MIN_FUNCTIONS
500 #define CONFIG_SYS_BAUDRATE_TABLE \
501 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
503 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
504 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
506 /* Use the HUSH parser */
507 #define CONFIG_SYS_HUSH_PARSER
510 * Pass open firmware flat tree
512 #define CONFIG_OF_LIBFDT
513 #define CONFIG_OF_BOARD_SETUP
514 #define CONFIG_OF_STDOUT_VIA_ALIAS
516 /* new uImage format support */
518 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
521 #define CONFIG_SYS_I2C
522 #define CONFIG_SYS_I2C_FSL
523 #define CONFIG_SYS_FSL_I2C_SPEED 400000
524 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
525 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
526 #define CONFIG_SYS_FSL_I2C2_SPEED 400000
527 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
528 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
529 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} }
530 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
531 #define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */
536 #undef CONFIG_ID_EEPROM
538 #define CONFIG_RTC_PT7C4338
539 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
540 #define CONFIG_SYS_I2C_PCA9557_ADDR 0x18
542 /* enable read and write access to EEPROM */
543 #define CONFIG_CMD_EEPROM
544 #define CONFIG_SYS_I2C_MULTI_EEPROMS
545 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
546 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
547 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
550 * eSPI - Enhanced SPI
552 #define CONFIG_HARD_SPI
553 #define CONFIG_FSL_ESPI
555 #if defined(CONFIG_SPI_FLASH)
556 #define CONFIG_SPI_FLASH_SPANSION
557 #define CONFIG_CMD_SF
558 #define CONFIG_SF_DEFAULT_SPEED 10000000
559 #define CONFIG_SF_DEFAULT_MODE 0
562 #if defined(CONFIG_PCI)
565 * Memory space is mapped 1-1, but I/O space must start from 0.
568 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
569 #define CONFIG_SYS_PCIE2_NAME "PCIe SLOT"
570 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
571 #ifdef CONFIG_PHYS_64BIT
572 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
573 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
575 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
576 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
578 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
579 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
580 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
581 #ifdef CONFIG_PHYS_64BIT
582 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull
584 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
586 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
588 /* controller 1, Slot 2, tgtid 1, Base address a000 */
589 #define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT"
590 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
591 #ifdef CONFIG_PHYS_64BIT
592 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
593 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
595 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
596 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
598 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
599 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
600 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
601 #ifdef CONFIG_PHYS_64BIT
602 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull
604 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
606 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
608 #define CONFIG_PCI_PNP /* do pci plug-and-play */
609 #define CONFIG_E1000 /* Defind e1000 pci Ethernet card*/
610 #define CONFIG_CMD_PCI
611 #define CONFIG_CMD_NET
613 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
614 #define CONFIG_DOS_PARTITION
615 #endif /* CONFIG_PCI */
617 #if defined(CONFIG_TSEC_ENET)
618 #define CONFIG_MII /* MII PHY management */
620 #define CONFIG_TSEC1_NAME "eTSEC1"
622 #define CONFIG_TSEC2_NAME "eTSEC2"
624 #define CONFIG_TSEC3_NAME "eTSEC3"
626 #define TSEC1_PHY_ADDR 2
627 #define TSEC2_PHY_ADDR 0
628 #define TSEC3_PHY_ADDR 1
630 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
631 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
632 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
634 #define TSEC1_PHYIDX 0
635 #define TSEC2_PHYIDX 0
636 #define TSEC3_PHYIDX 0
638 #define CONFIG_ETHPRIME "eTSEC1"
640 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
642 #define CONFIG_HAS_ETH0
643 #define CONFIG_HAS_ETH1
644 #define CONFIG_HAS_ETH2
645 #endif /* CONFIG_TSEC_ENET */
648 /* QE microcode/firmware address */
649 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
650 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xefec0000
651 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
652 #endif /* CONFIG_QE */
654 #ifdef CONFIG_P1025RDB
656 * QE UEC ethernet configuration
658 #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120)
660 #undef CONFIG_UEC_ETH
661 #define CONFIG_PHY_MODE_NEED_CHANGE
663 #define CONFIG_UEC_ETH1 /* ETH1 */
664 #define CONFIG_HAS_ETH0
666 #ifdef CONFIG_UEC_ETH1
667 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
668 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */
669 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */
670 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
671 #define CONFIG_SYS_UEC1_PHY_ADDR 0x0 /* 0x0 for MII */
672 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
673 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
674 #endif /* CONFIG_UEC_ETH1 */
676 #define CONFIG_UEC_ETH5 /* ETH5 */
677 #define CONFIG_HAS_ETH1
679 #ifdef CONFIG_UEC_ETH5
680 #define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */
681 #define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE
682 #define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */
683 #define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH
684 #define CONFIG_SYS_UEC5_PHY_ADDR 0x3 /* 0x3 for RMII */
685 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
686 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100
687 #endif /* CONFIG_UEC_ETH5 */
688 #endif /* CONFIG_P1025RDB */
693 #ifdef CONFIG_RAMBOOT_SPIFLASH
694 #define CONFIG_ENV_IS_IN_SPI_FLASH
695 #define CONFIG_ENV_SPI_BUS 0
696 #define CONFIG_ENV_SPI_CS 0
697 #define CONFIG_ENV_SPI_MAX_HZ 10000000
698 #define CONFIG_ENV_SPI_MODE 0
699 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */
700 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
701 #define CONFIG_ENV_SECT_SIZE 0x10000
702 #elif defined(CONFIG_RAMBOOT_SDCARD)
703 #define CONFIG_ENV_IS_IN_MMC
704 #define CONFIG_FSL_FIXED_MMC_LOCATION
705 #define CONFIG_ENV_SIZE 0x2000
706 #define CONFIG_SYS_MMC_ENV_DEV 0
707 #elif defined(CONFIG_NAND)
708 #define CONFIG_ENV_IS_IN_NAND
709 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
710 #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
711 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
712 #elif defined(CONFIG_SYS_RAMBOOT)
713 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
714 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
715 #define CONFIG_ENV_SIZE 0x2000
717 #define CONFIG_ENV_IS_IN_FLASH
718 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
719 #define CONFIG_ENV_ADDR 0xfff80000
721 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
723 #define CONFIG_ENV_SIZE 0x2000
724 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
727 #define CONFIG_LOADS_ECHO /* echo on for serial download */
728 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
731 * Command line configuration.
733 #include <config_cmd_default.h>
735 #define CONFIG_CMD_IRQ
736 #define CONFIG_CMD_PING
737 #define CONFIG_CMD_I2C
738 #define CONFIG_CMD_MII
739 #define CONFIG_CMD_DATE
740 #define CONFIG_CMD_ELF
741 #define CONFIG_CMD_SETEXPR
742 #define CONFIG_CMD_REGINFO
747 #define CONFIG_HAS_FSL_DR_USB
749 #if defined(CONFIG_HAS_FSL_DR_USB)
750 #define CONFIG_USB_EHCI
752 #ifdef CONFIG_USB_EHCI
753 #define CONFIG_CMD_USB
754 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
755 #define CONFIG_USB_EHCI_FSL
756 #define CONFIG_USB_STORAGE
763 #define CONFIG_FSL_ESDHC
764 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
765 #define CONFIG_CMD_MMC
766 #define CONFIG_GENERIC_MMC
769 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
770 || defined(CONFIG_FSL_SATA)
771 #define CONFIG_CMD_EXT2
772 #define CONFIG_CMD_FAT
773 #define CONFIG_DOS_PARTITION
776 #undef CONFIG_WATCHDOG /* watchdog disabled */
779 * Miscellaneous configurable options
781 #define CONFIG_SYS_LONGHELP /* undef to save memory */
782 #define CONFIG_CMDLINE_EDITING /* Command-line editing */
783 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
784 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
785 #if defined(CONFIG_CMD_KGDB)
786 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
788 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
790 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
791 /* Print Buffer Size */
792 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
793 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
794 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */
797 * For booting Linux, the board info and command line data
798 * have to be in the first 64 MB of memory, since this is
799 * the maximum mapped by the Linux kernel during initialization.
801 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/
802 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
804 #if defined(CONFIG_CMD_KGDB)
805 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
806 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
810 * Environment Configuration
812 #define CONFIG_HOSTNAME unknown
813 #define CONFIG_ROOTPATH "/opt/nfsroot"
814 #define CONFIG_BOOTFILE "uImage"
815 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
817 /* default location for tftp and bootm */
818 #define CONFIG_LOADADDR 1000000
820 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
821 #define CONFIG_BOOTARGS /* the boot command will set bootargs */
823 #define CONFIG_BAUDRATE 115200
826 #define __NOR_RST_CMD \
827 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
828 i2c mw 18 3 __SW_BOOT_MASK 1; reset
831 #define __SPI_RST_CMD \
832 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
833 i2c mw 18 3 __SW_BOOT_MASK 1; reset
836 #define __SD_RST_CMD \
837 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
838 i2c mw 18 3 __SW_BOOT_MASK 1; reset
840 #ifdef __SW_BOOT_NAND
841 #define __NAND_RST_CMD \
842 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
843 i2c mw 18 3 __SW_BOOT_MASK 1; reset
845 #ifdef __SW_BOOT_PCIE
846 #define __PCIE_RST_CMD \
847 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
848 i2c mw 18 3 __SW_BOOT_MASK 1; reset
851 #define CONFIG_EXTRA_ENV_SETTINGS \
853 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
854 "loadaddr=1000000\0" \
855 "bootfile=uImage\0" \
856 "tftpflash=tftpboot $loadaddr $uboot; " \
857 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
858 "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
859 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
860 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
861 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
862 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" \
863 "consoledev=ttyS0\0" \
864 "ramdiskaddr=2000000\0" \
865 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
868 "jffs2nor=mtdblock3\0" \
869 "norbootaddr=ef080000\0" \
870 "norfdtaddr=ef040000\0" \
871 "jffs2nand=mtdblock9\0" \
872 "nandbootaddr=100000\0" \
873 "nandfdtaddr=80000\0" \
874 "ramdisk_size=120000\0" \
875 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
876 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
877 __stringify(__NOR_RST_CMD)"\0" \
878 __stringify(__SPI_RST_CMD)"\0" \
879 __stringify(__SD_RST_CMD)"\0" \
880 __stringify(__NAND_RST_CMD)"\0" \
881 __stringify(__PCIE_RST_CMD)"\0"
883 #define CONFIG_NFSBOOTCOMMAND \
884 "setenv bootargs root=/dev/nfs rw " \
885 "nfsroot=$serverip:$rootpath " \
886 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
887 "console=$consoledev,$baudrate $othbootargs;" \
888 "tftp $loadaddr $bootfile;" \
889 "tftp $fdtaddr $fdtfile;" \
890 "bootm $loadaddr - $fdtaddr"
892 #define CONFIG_HDBOOT \
893 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \
894 "console=$consoledev,$baudrate $othbootargs;" \
896 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \
897 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \
898 "bootm $loadaddr - $fdtaddr"
900 #define CONFIG_USB_FAT_BOOT \
901 "setenv bootargs root=/dev/ram rw " \
902 "console=$consoledev,$baudrate $othbootargs " \
903 "ramdisk_size=$ramdisk_size;" \
905 "fatload usb 0:2 $loadaddr $bootfile;" \
906 "fatload usb 0:2 $fdtaddr $fdtfile;" \
907 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
908 "bootm $loadaddr $ramdiskaddr $fdtaddr"
910 #define CONFIG_USB_EXT2_BOOT \
911 "setenv bootargs root=/dev/ram rw " \
912 "console=$consoledev,$baudrate $othbootargs " \
913 "ramdisk_size=$ramdisk_size;" \
915 "ext2load usb 0:4 $loadaddr $bootfile;" \
916 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
917 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
918 "bootm $loadaddr $ramdiskaddr $fdtaddr"
920 #define CONFIG_NORBOOT \
921 "setenv bootargs root=/dev/$jffs2nor rw " \
922 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \
923 "bootm $norbootaddr - $norfdtaddr"
925 #define CONFIG_RAMBOOTCOMMAND \
926 "setenv bootargs root=/dev/ram rw " \
927 "console=$consoledev,$baudrate $othbootargs " \
928 "ramdisk_size=$ramdisk_size;" \
929 "tftp $ramdiskaddr $ramdiskfile;" \
930 "tftp $loadaddr $bootfile;" \
931 "tftp $fdtaddr $fdtfile;" \
932 "bootm $loadaddr $ramdiskaddr $fdtaddr"
934 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT
936 #endif /* __CONFIG_H */