3 * Net Insight <www.netinsight.net>
4 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
6 * Based on sheevaplug.h:
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
11 * SPDX-License-Identifier: GPL-2.0+
14 #ifndef _CONFIG_OPENRD_H
15 #define _CONFIG_OPENRD_H
18 * Version number information
20 #ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
21 # define CONFIG_IDENT_STRING "\nOpenRD-Ultimate"
23 # ifdef CONFIG_BOARD_IS_OPENRD_CLIENT
24 # define CONFIG_IDENT_STRING "\nOpenRD-Client"
26 # ifdef CONFIG_BOARD_IS_OPENRD_BASE
27 # define CONFIG_IDENT_STRING "\nOpenRD-Base"
29 # error Unknown OpenRD board specified
35 * High Level Configuration Options (easy to change)
37 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
38 #define CONFIG_KIRKWOOD 1 /* SOC Family Name */
39 #define CONFIG_KW88F6281 1 /* SOC Name */
40 #define CONFIG_MACH_OPENRD_BASE /* Machine type */
41 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
44 * Commands configuration
46 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
47 #define CONFIG_SYS_MVFS
48 #include <config_cmd_default.h>
49 #define CONFIG_CMD_DHCP
50 #define CONFIG_CMD_ENV
51 #define CONFIG_CMD_MII
52 #define CONFIG_CMD_MMC
53 #define CONFIG_CMD_NAND
54 #define CONFIG_CMD_PING
55 #define CONFIG_CMD_USB
56 #define CONFIG_CMD_IDE
59 * mv-common.h should be defined after CMD configs since it used them
60 * to enable certain macros
62 #include "mv-common.h"
65 * Environment variables configurations
67 #ifdef CONFIG_CMD_NAND
68 #define CONFIG_ENV_IS_IN_NAND 1
69 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
71 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
74 * max 4k env size is enough, but in case of nand
75 * it has to be rounded to sector size
77 #define CONFIG_ENV_SIZE 0x20000 /* 128k */
78 #define CONFIG_ENV_ADDR 0x60000
79 #define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
81 * Environment is right behind U-Boot in flash. Make sure U-Boot
82 * doesn't grow into the environment area.
84 #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET
87 * Default environment variables
89 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
90 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
91 "${x_bootcmd_usb}; bootm 0x6400000;"
93 #define MTDIDS_DEFAULT "nand0=nand_mtd"
94 #define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
95 "0x400000@0x100000(uImage),"\
96 "0x1fb00000@0x500000(rootfs)"
98 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
99 "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
100 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
101 "x_bootcmd_usb=usb start\0" \
102 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \
103 "mtdids="MTDIDS_DEFAULT"\0" \
104 "mtdparts="MTDPARTS_DEFAULT"\0"
107 * Ethernet Driver configuration
109 #ifdef CONFIG_CMD_NET
110 # ifdef CONFIG_BOARD_IS_OPENRD_BASE
111 # define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
113 # define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
115 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
116 # define CONFIG_PHY_BASE_ADR 0x0
117 # define PHY_NO "88E1121"
119 # define CONFIG_PHY_BASE_ADR 0x8
120 # define PHY_NO "88E1116"
122 #endif /* CONFIG_CMD_NET */
125 * SATA Driver configuration
127 #ifdef CONFIG_MVSATA_IDE
128 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
129 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
130 #endif /*CONFIG_MVSATA_IDE*/
132 #ifdef CONFIG_CMD_MMC
134 #define CONFIG_GENERIC_MMC
135 #define CONFIG_MVEBU_MMC
136 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
137 #endif /* CONFIG_CMD_MMC */
139 #endif /* _CONFIG_OPENRD_BASE_H */