1 /* SPDX-License-Identifier: GPL-2.0+ */
4 * Net Insight <www.netinsight.net>
5 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
7 * Based on sheevaplug.h:
9 * Marvell Semiconductor <www.marvell.com>
10 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
13 #ifndef _CONFIG_OPENRD_H
14 #define _CONFIG_OPENRD_H
17 * High Level Configuration Options (easy to change)
19 #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
20 #define CONFIG_KW88F6281 1 /* SOC Name */
21 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
23 #include "mv-common.h"
26 * Environment variables configurations
29 * max 4k env size is enough, but in case of nand
30 * it has to be rounded to sector size
33 * Environment is right behind U-Boot in flash. Make sure U-Boot
34 * doesn't grow into the environment area.
36 #define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET
39 * Default environment variables
41 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
42 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
43 "${x_bootcmd_usb}; bootm 0x6400000;"
45 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \
46 CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
47 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
48 "x_bootcmd_usb=usb start\0" \
49 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"
52 * Ethernet Driver configuration
55 # ifdef CONFIG_BOARD_IS_OPENRD_BASE
56 # define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
58 # define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
60 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
61 # define CONFIG_PHY_BASE_ADR 0x0
62 # define PHY_NO "88E1121"
64 # define CONFIG_PHY_BASE_ADR 0x8
65 # define PHY_NO "88E1116"
67 #endif /* CONFIG_CMD_NET */
70 * SATA Driver configuration
72 #ifdef CONFIG_MVSATA_IDE
73 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
74 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
75 #endif /*CONFIG_MVSATA_IDE*/
77 #endif /* _CONFIG_OPENRD_BASE_H */