include/configs/omap5_uevm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2013
   4  * Texas Instruments Incorporated.
   5  * Sricharan R    <r.sricharan@ti.com>
   6  *
   7  * Configuration settings for the TI EVM5430 board.
   8  * See ti_omap5_common.h for omap5 common settings.
   9  */
  10
  11 #ifndef __CONFIG_OMAP5_EVM_H
  12 #define __CONFIG_OMAP5_EVM_H
  13
  14 #include <environment/ti/dfu.h>
  15
  16 #ifndef CONFIG_SPL_BUILD
  17 /* Define the default GPT table for eMMC */
  18 #define PARTS_DEFAULT \
  19         "uuid_disk=${uuid_gpt_disk};" \
  20         "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
  21 #endif
  22
  23 #define DFUARGS \
  24         "dfu_bufsiz=0x10000\0" \
  25         DFU_ALT_INFO_MMC \
  26         DFU_ALT_INFO_EMMC \
  27         DFU_ALT_INFO_RAM
  28
  29 #include <configs/ti_omap5_common.h>
  30
  31 #define CONFIG_SYS_NS16550_COM3         UART3_BASE
  32
  33 /* MMC ENV related defines */
  34 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SLOT2: eMMC(1) */
  35
  36 /* Enhance our eMMC support / experience. */
  37 #define CONFIG_HSMMC2_8BIT
  38
  39 /* Required support for the TCA642X GPIO we have on the uEVM */
  40 #define CONFIG_TCA642X
  41 #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
  42 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
  43
  44 /* USB UHH support options */
  45 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  46
  47 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
  48 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
  49
  50 /* Enabled commands */
  51
  52 /* USB Networking options */
  53
  54 #define CONSOLEDEV              "ttyS2"
  55
  56 #define CONFIG_SCSI_AHCI_PLAT
  57 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
  58 #define CONFIG_SYS_SCSI_MAX_LUN         1
  59 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  60                                                 CONFIG_SYS_SCSI_MAX_LUN)
  61
  62 #endif /* __CONFIG_OMAP5_EVM_H */