1 /* SPDX-License-Identifier: GPL-2.0+ */
4 * Texas Instruments Incorporated.
5 * Sricharan R <r.sricharan@ti.com>
7 * Configuration settings for the TI EVM5430 board.
8 * See ti_omap5_common.h for omap5 common settings.
11 #ifndef __CONFIG_OMAP5_EVM_H
12 #define __CONFIG_OMAP5_EVM_H
14 #include <environment/ti/dfu.h>
16 #ifndef CONFIG_SPL_BUILD
17 /* Define the default GPT table for eMMC */
18 #define PARTS_DEFAULT \
19 "uuid_disk=${uuid_gpt_disk};" \
20 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
24 "dfu_bufsiz=0x10000\0" \
29 #include <configs/ti_omap5_common.h>
31 #define CONFIG_SYS_NS16550_COM3 UART3_BASE
33 #define CONFIG_MISC_INIT_R
34 /* MMC ENV related defines */
35 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
36 #define CONFIG_ENV_SIZE (128 << 10)
37 #define CONFIG_ENV_OFFSET 0x260000
38 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
39 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
41 /* Enhance our eMMC support / experience. */
42 #define CONFIG_HSMMC2_8BIT
43 #define CONFIG_SUPPORT_EMMC_BOOT
45 /* Required support for the TCA642X GPIO we have on the uEVM */
46 #define CONFIG_TCA642X
47 #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
48 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
50 /* USB UHH support options */
51 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
53 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
54 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
56 /* Enabled commands */
58 /* USB Networking options */
60 #define CONSOLEDEV "ttyO2"
62 #define CONFIG_SCSI_AHCI_PLAT
63 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
64 #define CONFIG_SYS_SCSI_MAX_LUN 1
65 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
66 CONFIG_SYS_SCSI_MAX_LUN)
68 #endif /* __CONFIG_OMAP5_EVM_H */