Merge branch 'master' of git://git.denx.de/u-boot-usb
[platform/kernel/u-boot.git] / include / configs / omap3_zoom1.h
1 /*
2  * (C) Copyright 2006-2008
3  * Texas Instruments.
4  * Richard Woodruff <r-woodruff2@ti.com>
5  * Syed Mohammed Khasim <x0khasim@ti.com>
6  * Nishanth Menon <nm@ti.com>
7  *
8  * Configuration settings for the TI OMAP3430 Zoom MDK board.
9  *
10  * SPDX-License-Identifier:     GPL-2.0+
11  */
12
13 #ifndef __CONFIG_H
14 #define __CONFIG_H
15
16 /*
17  * High Level Configuration Options
18  */
19 #define CONFIG_OMAP3_ZOOM1      1       /* working with Zoom MDK Rev1 */
20 #define CONFIG_SYS_GENERIC_BOARD
21
22 #define CONFIG_NAND
23 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
24 #include <asm/arch/cpu.h>               /* get chip and board defs */
25 #include <asm/arch/omap3.h>
26 #include <configs/ti_omap3_common.h>
27
28 /* Remove SPL boot option - we do not support that on LDP yet */
29 #undef CONFIG_SPL_FRAMEWORK
30 #undef CONFIG_SPL_OS_BOOT
31
32 /* Generic NAND definition conflicts with debug_base */
33 #undef CONFIG_SYS_NAND_BASE
34
35 /*
36  * Display CPU and Board information
37  */
38 #define CONFIG_DISPLAY_CPUINFO          1
39 #define CONFIG_DISPLAY_BOARDINFO        1
40
41 #define CONFIG_MISC_INIT_R
42
43 #define CONFIG_REVISION_TAG             1
44
45 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
46
47 /*
48  * Hardware drivers
49  */
50
51 /* USB */
52 #define CONFIG_MUSB_UDC                 1
53 #define CONFIG_USB_OMAP3                1
54 #define CONFIG_TWL4030_USB              1
55
56 /* USB device configuration */
57 #define CONFIG_USB_DEVICE               1
58 #define CONFIG_USB_TTY                  1
59 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
60 /* Change these to suit your needs */
61 #define CONFIG_USBD_VENDORID            0x0451
62 #define CONFIG_USBD_PRODUCTID           0x5678
63 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
64 #define CONFIG_USBD_PRODUCT_NAME        "Zoom1"
65
66 #define MTDIDS_DEFAULT                  "nand0=nand"
67 #define MTDPARTS_DEFAULT                "mtdparts=nand:512k(x-loader),"\
68                                         "1920k(u-boot),128k(u-boot-env),"\
69                                         "4m(kernel),-(fs)"
70
71 #if defined(CONFIG_CMD_NAND)
72 /* NAND: SPL falcon mode configs */
73 #ifdef CONFIG_SPL_OS_BOOT
74 #define CONFIG_CMD_SPL_NAND_OFS         0x240000
75 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
76 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
77 #endif
78 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
79 #endif
80
81 #undef CONFIG_CMD_FLASH         /* flinfo, erase, protect       */
82 #undef CONFIG_CMD_FPGA          /* FPGA configuration Support   */
83 #undef CONFIG_CMD_IMI           /* iminfo                       */
84 #undef CONFIG_CMD_IMLS          /* List all found images        */
85 #define CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
86 #define CONFIG_CMD_NFS          /* NFS support                  */
87 #define CONFIG_CMD_PING
88 #define CONFIG_CMD_DHCP
89
90 #undef CONFIG_SYS_I2C_OMAP24XX
91 #define CONFIG_SYS_I2C_OMAP34XX
92
93 /*
94  * TWL4030
95  */
96 #define CONFIG_TWL4030_LED              1
97
98 /*
99  * Board NAND Info.
100  */
101 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
102                                                         /* to access nand */
103 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
104                                                         /* to access nand at */
105                                                         /* CS0 */
106 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT  16
107
108 /* Environment information */
109
110 #define CONFIG_EXTRA_ENV_SETTINGS \
111         "loadaddr=0x82000000\0" \
112         "fdtaddr=0x80f80000\0" \
113         "bootfile=uImage\0" \
114         "fdtfile=omap3-ldp.dtb\0" \
115         "bootdir=/\0" \
116         "bootpart=0:1\0" \
117         "usbtty=cdc_acm\0" \
118         "console=ttyO2,115200n8\0" \
119         "mmcdev=0\0" \
120         "videomode=1024x768@60,vxres=1024,vyres=768\0" \
121         "videospec=omapfb:vram:2M,vram:4M\0" \
122         "mmcargs=setenv bootargs console=${console} " \
123                 "video=${videospec},mode:${videomode} " \
124                 "root=/dev/mmcblk0p2 rw " \
125                 "rootfstype=ext3 rootwait\0" \
126         "nandargs=setenv bootargs console=${console} " \
127                 "video=${videospec},mode:${videomode} " \
128                 "root=/dev/mtdblock4 rw " \
129                 "rootfstype=jffs2\0" \
130         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
131         "bootscript=echo Running bootscript from mmc ...; " \
132                 "source ${loadaddr}\0" \
133         "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
134         "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
135         "loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\
136         "mmcboot=echo Booting from mmc ...; " \
137                 "run mmcargs; " \
138                 "bootm ${loadaddr}\0" \
139         "mmczboot=echo Booting from mmc ...; " \
140                 "run mmcargs; " \
141                 "bootz ${loadaddr} - ${fdtaddr}\0" \
142         "nandboot=echo Booting from nand ...; " \
143                 "run nandargs; " \
144                 "nand read ${loadaddr} 280000 400000; " \
145                 "bootm ${loadaddr}\0" \
146
147 #define CONFIG_BOOTCOMMAND \
148         "mmc dev ${mmcdev}; if mmc rescan; then " \
149                 "if run loadbootscript; then " \
150                         "run bootscript; " \
151                 "else " \
152                         "if run loadimage; then " \
153                                 "run mmcboot; " \
154                         "else if run loadzimage; then " \
155                                 "run mmczboot; " \
156                         "else run nandboot; " \
157                         "fi; fi;" \
158                 "fi; " \
159         "else run nandboot; fi"
160
161 /*
162  * Miscellaneous configurable options
163  */
164 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1)  /* memtest */
165 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_2 + \
166                                         0x01F00000) /* 31MB */
167
168 /*-----------------------------------------------------------------------
169  * FLASH and environment organization
170  */
171
172 /* **** PISMO SUPPORT *** */
173 #if defined(CONFIG_CMD_NAND)
174 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
175 #endif
176
177 /* Monitor at start of flash */
178 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
179 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
180
181 #define CONFIG_ENV_IS_IN_NAND           1
182 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
183 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
184
185 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
186 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
187 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
188
189 #define CONFIG_SYS_CACHELINE_SIZE       64
190
191 #ifdef CONFIG_CMD_NET
192 /* Ethernet (LAN9211 from SMSC9118 family) */
193 #define CONFIG_SMC911X
194 #define CONFIG_SMC911X_32_BIT
195 #define CONFIG_SMC911X_BASE             DEBUG_BASE
196
197 #endif
198
199 #endif                          /* __CONFIG_H */