include/configs/omap3_logic.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2011 Logic Product Development <www.logicpd.com>
   4  *      Peter Barada <peter.barada@logicpd.com>
   5  *
   6  * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
   7  * reference boards.
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /* High Level Configuration Options */
  14
  15 #include <configs/ti_omap3_common.h>
  16
  17 /* Board NAND Info. */
  18 #ifdef CONFIG_MTD_RAW_NAND
  19                                                   /* NAND devices */
  20 #define CFG_SYS_NAND_ECCPOS             {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
  21                                          13, 14, 16, 17, 18, 19, 20, 21, 22, \
  22                                          23, 24, 25, 26, 27, 28, 30, 31, 32, \
  23                                          33, 34, 35, 36, 37, 38, 39, 40, 41, \
  24                                          42, 44, 45, 46, 47, 48, 49, 50, 51, \
  25                                          52, 53, 54, 55, 56}
  26
  27 #define CFG_SYS_NAND_ECCSIZE            512
  28 #define CFG_SYS_NAND_ECCBYTES   13
  29 #endif
  30
  31 /* Environment information */
  32
  33 #define CONFIG_EXTRA_ENV_SETTINGS \
  34         DEFAULT_LINUX_BOOT_ENV \
  35         "mmcdev=0\0" \
  36         "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
  37         "mmcrootfstype=ext4 rootwait\0" \
  38         "nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
  39         "nandrootfstype=ubifs rootwait\0" \
  40         "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
  41                         "if run loadbootscript; then " \
  42                                 "run bootscript; " \
  43                         "else " \
  44                                 "run defaultboot;" \
  45                         "fi; " \
  46                 "else run defaultboot; fi\0" \
  47         "defaultboot=run mmcramboot\0" \
  48         "consoledevice=ttyS0\0" \
  49         "setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
  50         "dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
  51         "rotation=0\0" \
  52         "vrfb_arg=if itest ${rotation} -ne 0; then " \
  53                 "setenv bootargs ${bootargs} omapfb.vrfb=y " \
  54                 "omapfb.rotate=${rotation}; " \
  55                 "fi\0" \
  56         "optargs=ignore_loglevel early_printk no_console_suspend\0" \
  57         "common_bootargs=run setconsole; setenv bootargs " \
  58                 "${bootargs} "\
  59                 "console=${console} " \
  60                 "${mtdparts} "\
  61                 "${optargs}; " \
  62                 "run vrfb_arg\0" \
  63         "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
  64         "bootscript=echo 'Running bootscript from mmc ...'; " \
  65                 "source ${loadaddr}\0" \
  66         "loadimage=mmc rescan; " \
  67                 "load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
  68         "ramdisksize=64000\0" \
  69         "ramdiskimage=rootfs.ext2.gz.uboot\0" \
  70         "loadramdisk=mmc rescan; " \
  71                 "load mmc ${mmcdev} ${rdaddr} ${ramdiskimage}\0" \
  72         "ramargs=setenv bootargs "\
  73                 "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
  74         "mmcargs=setenv bootargs "\
  75                 "root=PARTUUID=${uuid} " \
  76                 "rootfstype=${mmcrootfstype} rw\0" \
  77         "nandargs=setenv bootargs "\
  78                 "root=${nandroot} " \
  79                 "rootfstype=${nandrootfstype}\0" \
  80         "nfsargs=setenv serverip ${tftpserver}; " \
  81                 "setenv bootargs root=/dev/nfs " \
  82                 "nfsroot=${nfsrootpath} " \
  83                 "ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \
  84         "nfsrootpath=/opt/nfs-exports/omap\0" \
  85         "fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
  86         "loadfdt=mmc rescan; " \
  87                 "load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
  88         "mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
  89                 "run finduuid; "\
  90                 "run mmcargs; " \
  91                 "run common_bootargs; " \
  92                 "run dump_bootargs; " \
  93                 "run loadimage; " \
  94                 "run loadfdt;\0 " \
  95         "mmcbootz=setenv bootfile zImage; " \
  96                 "run mmcbootcommon; "\
  97                 "bootz ${loadaddr} - ${fdtaddr}\0" \
  98         "mmcboot=setenv bootfile uImage; "\
  99                 "run mmcbootcommon; "\
 100                 "bootm ${loadaddr} - ${fdtaddr}\0" \
 101         "mmcrambootcommon=echo 'Booting kernel from MMC w/ramdisk...'; " \
 102                 "run ramargs; " \
 103                 "run common_bootargs; " \
 104                 "run dump_bootargs; " \
 105                 "run loadimage; " \
 106                 "run loadfdt; " \
 107                 "run loadramdisk\0" \
 108         "mmcramboot=setenv bootfile uImage; " \
 109                 "run mmcrambootcommon; " \
 110                 "bootm ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
 111         "mmcrambootz=setenv bootfile zImage; " \
 112                 "run mmcrambootcommon; " \
 113                 "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
 114         "tftpboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
 115                 "run ramargs; " \
 116                 "run common_bootargs; " \
 117                 "run dump_bootargs; " \
 118                 "tftpboot ${loadaddr} ${zimage}; " \
 119                 "tftpboot ${rdaddr} ${ramdiskimage}; " \
 120                 "bootm ${loadaddr} ${rdaddr}\0" \
 121         "tftpbootz=echo 'Booting kernel NFS rootfs...'; " \
 122                 "dhcp;" \
 123                 "run nfsargs;" \
 124                 "run common_bootargs;" \
 125                 "run dump_bootargs;" \
 126                 "tftpboot $loadaddr zImage;" \
 127                 "bootz $loadaddr\0" \
 128         "nandbootcommon=echo 'Booting kernel from NAND...';" \
 129                 "run nandargs;" \
 130                 "run common_bootargs;" \
 131                 "run dump_bootargs;" \
 132                 "nand read ${loadaddr} kernel;" \
 133                 "nand read ${fdtaddr} spl-os;\0" \
 134         "nandbootz=run nandbootcommon; "\
 135                 "bootz ${loadaddr} - ${fdtaddr}\0"\
 136         "nandboot=run nandbootcommon; "\
 137                 "bootm ${loadaddr} - ${fdtaddr}\0"\
 138
 139 /* Miscellaneous configurable options */
 140
 141 /* memtest works on */
 142
 143 /* FLASH and environment organization */
 144
 145 /* **** PISMO SUPPORT *** */
 146 #if defined(CONFIG_CMD_NAND)
 147 #define CFG_SYS_FLASH_BASE              0x10000000
 148 #endif
 149
 150 #define CFG_SYS_FLASH_SIZE              0x4000000
 151
 152 #endif /* __CONFIG_H */