2 * Common configuration settings for IGEP technology based boards
5 * ISEE 2007 SL, <www.iseebcn.com>
7 * SPDX-License-Identifier: GPL-2.0+
13 #define CONFIG_NR_DRAM_BANKS 2
15 #include <configs/ti_omap3_common.h>
18 * We are only ever GP parts and will utilize all of the "downloaded image"
19 * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
21 #undef CONFIG_SPL_TEXT_BASE
22 #define CONFIG_SPL_TEXT_BASE 0x40200000
24 #define CONFIG_MISC_INIT_R
26 #define CONFIG_REVISION_TAG 1
29 #define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 is in GPIO bank 2 */
30 #define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO bank 4 */
33 #define PBIASLITEVMODE1 (1 << 8)
36 #define IGEP0020_GPIO_LED 27
37 #define IGEP0030_GPIO_LED 16
39 /* Board and revision detection GPIOs */
40 #define IGEP0030_USB_TRANSCEIVER_RESET 54
41 #define GPIO_IGEP00X0_BOARD_DETECTION 28
42 #define GPIO_IGEP00X0_REVISION_DETECTION 129
45 #define CONFIG_USB_MUSB_UDC 1
46 #define CONFIG_USB_OMAP3 1
47 #define CONFIG_TWL4030_USB 1
49 /* USB device configuration */
50 #define CONFIG_USB_DEVICE 1
51 #define CONFIG_USB_TTY 1
53 /* Change these to suit your needs */
54 #define CONFIG_USBD_VENDORID 0x0451
55 #define CONFIG_USBD_PRODUCTID 0x5678
56 #define CONFIG_USBD_MANUFACTURER "Texas Instruments"
57 #define CONFIG_USBD_PRODUCT_NAME "IGEP"
59 #ifndef CONFIG_SPL_BUILD
62 #define ENV_DEVICE_SETTINGS \
67 #define MEM_LAYOUT_SETTINGS \
68 DEFAULT_LINUX_BOOT_ENV \
69 "scriptaddr=0x87E00000\0" \
70 "pxefile_addr_r=0x87F00000\0"
72 #define BOOT_TARGET_DEVICES(func) \
75 #define CONFIG_BOOTCOMMAND \
79 #include <config_distro_bootcmd.h>
83 "if test ${board_name} = igep0020; then " \
84 "if test ${board_rev} = F; then " \
85 "setenv fdtfile omap3-igep0020-rev-f.dtb; " \
87 "setenv fdtfile omap3-igep0020.dtb; fi; fi; " \
88 "if test ${board_name} = igep0030; then " \
89 "if test ${board_rev} = G; then " \
90 "setenv fdtfile omap3-igep0030-rev-g.dtb; " \
92 "setenv fdtfile omap3-igep0030.dtb; fi; fi; " \
93 "if test ${fdtfile} = ''; then " \
94 "echo WARNING: Could not determine device tree to use; fi; \0"
96 #define CONFIG_EXTRA_ENV_SETTINGS \
107 #if defined(CONFIG_CMD_NET)
108 #define CONFIG_SMC911X
109 #define CONFIG_SMC911X_32_BIT
110 #define CONFIG_SMC911X_BASE 0x2C000000
111 #endif /* (CONFIG_CMD_NET) */
113 #define CONFIG_MTD_PARTITIONS
114 #define CONFIG_SYS_MTDPARTS_RUNTIME
117 #define CONFIG_USE_ONENAND_BOARD_INIT
118 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
119 #define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024)
122 #define CONFIG_SPL_OMAP3_ID_NAND
123 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
124 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
125 #define CONFIG_SYS_NAND_PAGE_COUNT 64
126 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
127 #define CONFIG_SYS_NAND_OOBSIZE 64
128 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
129 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
130 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
131 10, 11, 12, 13, 14, 15, 16, 17, \
132 18, 19, 20, 21, 22, 23, 24, 25, \
133 26, 27, 28, 29, 30, 31, 32, 33, \
134 34, 35, 36, 37, 38, 39, 40, 41, \
135 42, 43, 44, 45, 46, 47, 48, 49, \
136 50, 51, 52, 53, 54, 55, 56, 57, }
137 #define CONFIG_SYS_NAND_ECCSIZE 512
138 #define CONFIG_SYS_NAND_ECCBYTES 14
139 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
140 #define CONFIG_NAND_OMAP_GPMC
143 /* UBI configuration */
144 #define CONFIG_SPL_UBI 1
145 #define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
146 #define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
147 #define CONFIG_SPL_UBI_MAX_PEBS 4096
148 #define CONFIG_SPL_UBI_VOL_IDS 8
149 #define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
150 #define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
151 #define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
152 #define CONFIG_SPL_UBI_PEB_OFFSET 4
153 #define CONFIG_SPL_UBI_VID_OFFSET 512
154 #define CONFIG_SPL_UBI_LEB_START 2048
155 #define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
157 /* environment organization */
158 #define CONFIG_ENV_UBI_PART "UBI"
159 #define CONFIG_ENV_UBI_VOLUME "config"
160 #define CONFIG_ENV_UBI_VOLUME_REDUND "config_r"
161 #define CONFIG_UBI_SILENCE_MSG 1
162 #define CONFIG_UBIFS_SILENCE_MSG 1
163 #define CONFIG_ENV_SIZE (32*1024)
165 #endif /* __IGEP00X0_H */