2 * Common configuration settings for IGEP technology based boards
5 * ISEE 2007 SL, <www.iseebcn.com>
7 * SPDX-License-Identifier: GPL-2.0+
13 #ifdef CONFIG_BOOT_NAND
17 #define CONFIG_NR_DRAM_BANKS 2
19 #include <configs/ti_omap3_common.h>
20 #include <asm/mach-types.h>
23 * Display CPU and Board information
25 #define CONFIG_DISPLAY_CPUINFO 1
26 #define CONFIG_DISPLAY_BOARDINFO 1
28 #define CONFIG_MISC_INIT_R
30 #define CONFIG_REVISION_TAG 1
32 /* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
33 #if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
34 #define CONFIG_STATUS_LED
35 #define CONFIG_BOARD_SPECIFIC_LED
36 #define CONFIG_GPIO_LED
37 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
38 #define RED_LED_GPIO 27
39 #elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
40 #define RED_LED_GPIO 16
42 #error "status LED not defined for this machine."
45 #define STATUS_LED_BIT RED_LED_GPIO
46 #define STATUS_LED_STATE STATUS_LED_ON
47 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
48 #define STATUS_LED_BOOT RED_LED_DEV
52 #define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */
53 #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
54 #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
57 #define CONFIG_USB_MUSB_UDC 1
58 #define CONFIG_USB_OMAP3 1
59 #define CONFIG_TWL4030_USB 1
61 /* USB device configuration */
62 #define CONFIG_USB_DEVICE 1
63 #define CONFIG_USB_TTY 1
64 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
66 /* Change these to suit your needs */
67 #define CONFIG_USBD_VENDORID 0x0451
68 #define CONFIG_USBD_PRODUCTID 0x5678
69 #define CONFIG_USBD_MANUFACTURER "Texas Instruments"
70 #define CONFIG_USBD_PRODUCT_NAME "IGEP"
72 #define CONFIG_CMD_CACHE
73 #ifdef CONFIG_BOOT_ONENAND
74 #define CONFIG_CMD_ONENAND /* ONENAND support */
77 #ifndef CONFIG_SPL_BUILD
80 #define ENV_DEVICE_SETTINGS \
85 #define MEM_LAYOUT_SETTINGS \
86 DEFAULT_LINUX_BOOT_ENV \
87 "scriptaddr=0x87E00000\0" \
88 "pxefile_addr_r=0x87F00000\0"
90 #define BOOT_TARGET_DEVICES(func) \
93 #include <config_distro_bootcmd.h>
96 #define CONFIG_EXTRA_ENV_SETTINGS \
104 * FLASH and environment organization
107 #ifdef CONFIG_BOOT_ONENAND
108 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
110 #define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
112 #define CONFIG_ENV_IS_IN_ONENAND 1
113 #define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */
114 #define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET
118 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
119 #define CONFIG_ENV_IS_IN_NAND 1
120 #define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */
121 #define CONFIG_ENV_ADDR NAND_ENV_OFFSET
127 #if defined(CONFIG_CMD_NET)
128 #define CONFIG_SMC911X
129 #define CONFIG_SMC911X_32_BIT
130 #define CONFIG_SMC911X_BASE 0x2C000000
131 #endif /* (CONFIG_CMD_NET) */
133 /* OneNAND boot config */
134 #ifdef CONFIG_BOOT_ONENAND
135 #define CONFIG_SPL_ONENAND_SUPPORT
136 #define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000
137 #define CONFIG_SYS_ONENAND_PAGE_SIZE 2048
138 #define CONFIG_SPL_ONENAND_LOAD_ADDR 0x80000
139 #define CONFIG_SPL_ONENAND_LOAD_SIZE \
140 (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
144 /* NAND boot config */
146 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
147 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
148 #define CONFIG_SYS_NAND_PAGE_COUNT 64
149 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
150 #define CONFIG_SYS_NAND_OOBSIZE 64
151 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
152 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
153 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
154 10, 11, 12, 13, 14, 15, 16, 17, \
155 18, 19, 20, 21, 22, 23, 24, 25, \
156 26, 27, 28, 29, 30, 31, 32, 33, \
157 34, 35, 36, 37, 38, 39, 40, 41, \
158 42, 43, 44, 45, 46, 47, 48, 49, \
159 50, 51, 52, 53, 54, 55, 56, 57, }
160 #define CONFIG_SYS_NAND_ECCSIZE 512
161 #define CONFIG_SYS_NAND_ECCBYTES 14
162 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
163 #define CONFIG_NAND_OMAP_GPMC
166 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
167 /* NAND: SPL falcon mode configs */
168 #ifdef CONFIG_SPL_OS_BOOT
169 #define CONFIG_CMD_SPL_NAND_OFS 0x240000
170 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
171 #define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
175 #endif /* __IGEP00X0_H */