2 * Common configuration settings for IGEP technology based boards
5 * ISEE 2007 SL, <www.iseebcn.com>
7 * SPDX-License-Identifier: GPL-2.0+
13 #define CONFIG_NR_DRAM_BANKS 2
15 #include <configs/ti_omap3_common.h>
18 * We are only ever GP parts and will utilize all of the "downloaded image"
19 * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
21 #undef CONFIG_SPL_TEXT_BASE
22 #define CONFIG_SPL_TEXT_BASE 0x40200000
24 #define CONFIG_MISC_INIT_R
26 #define CONFIG_REVISION_TAG 1
29 #define CONFIG_OMAP3_GPIO_2 /* GPIO32..63 is in GPIO bank 2 */
30 #define CONFIG_OMAP3_GPIO_4 /* GPIO96..127 is in GPIO bank 4 */
33 #define PBIASLITEVMODE1 (1 << 8)
36 #define IGEP0020_GPIO_LED 27
37 #define IGEP0030_GPIO_LED 16
39 /* Board and revision detection GPIOs */
40 #define IGEP0030_USB_TRANSCEIVER_RESET 54
41 #define GPIO_IGEP00X0_BOARD_DETECTION 28
42 #define GPIO_IGEP00X0_REVISION_DETECTION 129
45 #define CONFIG_USB_MUSB_UDC 1
46 #define CONFIG_USB_OMAP3 1
47 #define CONFIG_TWL4030_USB 1
49 /* USB device configuration */
50 #define CONFIG_USB_DEVICE 1
51 #define CONFIG_USB_TTY 1
53 /* Change these to suit your needs */
54 #define CONFIG_USBD_VENDORID 0x0451
55 #define CONFIG_USBD_PRODUCTID 0x5678
56 #define CONFIG_USBD_MANUFACTURER "Texas Instruments"
57 #define CONFIG_USBD_PRODUCT_NAME "IGEP"
59 #ifndef CONFIG_SPL_BUILD
62 #define ENV_DEVICE_SETTINGS \
67 #define MEM_LAYOUT_SETTINGS \
68 DEFAULT_LINUX_BOOT_ENV \
69 "scriptaddr=0x87E00000\0" \
70 "pxefile_addr_r=0x87F00000\0"
72 #define BOOT_TARGET_DEVICES(func) \
75 #include <config_distro_bootcmd.h>
79 "if test ${board_name} = igep0020; then " \
80 "if test ${board_rev} = F; then " \
81 "setenv fdtfile omap3-igep0020-rev-f.dtb; " \
83 "setenv fdtfile omap3-igep0020.dtb; fi; fi; " \
84 "if test ${board_name} = igep0030; then " \
85 "if test ${board_rev} = G; then " \
86 "setenv fdtfile omap3-igep0030-rev-g.dtb; " \
88 "setenv fdtfile omap3-igep0030.dtb; fi; fi; " \
89 "if test ${fdtfile} = ''; then " \
90 "echo WARNING: Could not determine device tree to use; fi; \0"
92 #define CONFIG_EXTRA_ENV_SETTINGS \
100 #define CONFIG_MTD_PARTITIONS
101 #define CONFIG_SYS_MTDPARTS_RUNTIME
104 #define CONFIG_USE_ONENAND_BOARD_INIT
105 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
106 #define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024)
109 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
110 #define CONFIG_SYS_NAND_PAGE_COUNT 64
111 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
112 #define CONFIG_SYS_NAND_OOBSIZE 64
113 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
114 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
115 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
116 10, 11, 12, 13, 14, 15, 16, 17, \
117 18, 19, 20, 21, 22, 23, 24, 25, \
118 26, 27, 28, 29, 30, 31, 32, 33, \
119 34, 35, 36, 37, 38, 39, 40, 41, \
120 42, 43, 44, 45, 46, 47, 48, 49, \
121 50, 51, 52, 53, 54, 55, 56, 57, }
122 #define CONFIG_SYS_NAND_ECCSIZE 512
123 #define CONFIG_SYS_NAND_ECCBYTES 14
124 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
126 /* UBI configuration */
127 #define CONFIG_SPL_UBI 1
128 #define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
129 #define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
130 #define CONFIG_SPL_UBI_MAX_PEBS 4096
131 #define CONFIG_SPL_UBI_VOL_IDS 8
132 #define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
133 #define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
134 #define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
135 #define CONFIG_SPL_UBI_PEB_OFFSET 4
136 #define CONFIG_SPL_UBI_VID_OFFSET 512
137 #define CONFIG_SPL_UBI_LEB_START 2048
138 #define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
140 /* environment organization */
141 #define CONFIG_ENV_UBI_PART "UBI"
142 #define CONFIG_ENV_UBI_VOLUME "config"
143 #define CONFIG_ENV_UBI_VOLUME_REDUND "config_r"
144 #define CONFIG_UBI_SILENCE_MSG 1
145 #define CONFIG_UBIFS_SILENCE_MSG 1
146 #define CONFIG_ENV_SIZE (32*1024)
148 #endif /* __IGEP00X0_H */