4 * Kshitij Gupta <kshitij@ti.com>
5 * Configuation settings for the TI OMAP Innovator board.
7 * See file CREDITS for list of people who contributed to this
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
30 * If we are developing, we might want to start armboot from ram
31 * so we MUST NOT initialize critical regs like mem-timing ...
33 #define CONFIG_INIT_CRITICAL /* undef for developing */
36 * High Level Configuration Options
39 #define CONFIG_ARM925T 1 /* This is an arm925t CPU */
40 #define CONFIG_OMAP 1 /* in a TI OMAP core */
41 #define CONFIG_OMAP1510 1 /* which is in a 1510 (helen) */
42 #define CONFIG_INNOVATOROMAP1510 1 /* a Innovator Board */
44 /* input clock of PLL */
45 #define CONFIG_SYS_CLK_FREQ 12000000 /* the OMAP1510 Innovator has 12MHz input clock */
47 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
49 #define CONFIG_MISC_INIT_R
51 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
52 #define CONFIG_SETUP_MEMORY_TAGS 1
55 * Size of malloc() pool
57 #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
58 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
64 #define CONFIG_DRIVER_SMC9196
65 #define CONFIG_SMC9196_BASE 0x08000300
66 #define CONFIG_SMC9196_EXT_PHY
68 #define CONFIG_DRIVER_LAN91C96
69 #define CONFIG_LAN91C96_BASE 0x08000300
70 #define CONFIG_LAN91C96_EXT_PHY
73 * NS16550 Configuration
76 #define CFG_NS16550_SERIAL
77 #define CFG_NS16550_REG_SIZE (-4)
78 #define CFG_NS16550_CLK (CONFIG_SYS_CLK_FREQ) /* can be 12M/32Khz or 48Mhz */
79 #define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */
82 * select serial console configuration
84 #define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP1510 Innovator */
86 /* allow to overwrite serial and ethaddr */
87 #define CONFIG_ENV_OVERWRITE
89 #define CONFIG_ENV_OVERWRITE
90 #define CONFIG_CONS_INDEX 1
91 #define CONFIG_BAUDRATE 115200
92 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
94 #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP)
95 #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
97 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
98 #include <cmd_confdefs.h>
99 #include <configs/omap1510.h>
101 #define CONFIG_BOOTDELAY 3
102 #define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=157.87.82.48:/home/a0875451/mwd/myfs/target ip=dhcp"
103 /*#define CONFIG_ETHADDR 00:0B:36:00:05:25 */
104 #define CONFIG_NETMASK 255.255.254.0 /* talk on MY local net */
105 #define CONFIG_IPADDR 156.117.97.156 /* static IP I currently own */
106 #define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */
107 #define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */
109 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
110 #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
111 /* what's this ? it's not used anywhere */
112 #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
116 * Miscellaneous configurable options
118 #define CFG_LONGHELP /* undef to save memory */
119 #define CFG_PROMPT "OMAP1510 Innovator # " /* Monitor Command Prompt */
120 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
121 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
122 #define CFG_MAXARGS 16 /* max number of command args */
123 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
125 #define CFG_MEMTEST_START 0x10000000 /* memtest works on */
126 #define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
128 #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
130 #define CFG_LOAD_ADDR 0x10000000 /* default load address */
132 /* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
133 * This time is further subdivided by a local divisor.
135 #define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */
136 #define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */
137 #define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
139 /*-----------------------------------------------------------------------
142 * The stack sizes are set up in start.S using the settings below
144 #define CONFIG_STACKSIZE (128*1024) /* regular stack */
145 #ifdef CONFIG_USE_IRQ
146 #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
147 #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
150 /*-----------------------------------------------------------------------
151 * Physical Memory Map
153 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
154 #define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
155 #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
157 #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
159 #define CFG_FLASH_BASE PHYS_FLASH_1
161 /*-----------------------------------------------------------------------
162 * FLASH and environment organization
164 #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
165 #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
166 #define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
167 #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) /* addr of environment */
169 /* timeout values are in ticks */
170 #define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
171 #define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
173 #define CFG_ENV_IS_IN_FLASH 1
174 #define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
175 #define CFG_ENV_OFFSET 0x20000 /* environment starts here */
177 #endif /* __CONFIG_H */