1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2013 Samsung Electronics
4 * Hyungwon Hwang <human.hwang@samsung.com>
7 #ifndef __CONFIG_ODROID_XU3_H
8 #define __CONFIG_ODROID_XU3_H
10 #include <configs/exynos5420-common.h>
11 #include <configs/exynos5-common.h>
13 #define CONFIG_BOARD_COMMON
15 #define CONFIG_SYS_SDRAM_BASE 0x40000000
17 #define TZPC_BASE_OFFSET 0x10000
19 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
20 /* Reserve the last 22 MiB for the secure firmware */
21 #define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL)
22 #define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE
24 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
27 #define CONFIG_USB_EHCI_EXYNOS
30 #define DFU_DEFAULT_POLL_TIMEOUT 300
31 #define DFU_MANIFEST_POLL_TIMEOUT 25000
34 #define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM
35 #define CONFIG_G_DNL_THOR_PRODUCT_NUM 0x685D
38 #define CONFIG_G_DNL_UMS_VENDOR_NUM 0x0525
39 #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5
41 /* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */
42 #undef CONFIG_EXYNOS_TMU
44 #define CONFIG_DFU_ALT_SYSTEM \
47 "Image.itb fat 0 1;" \
51 "exynos5422-odroidxu3.dtb fat 0 1;" \
52 "exynos5422-odroidxu3-lite.dtb fat 0 1;" \
53 "exynos5422-odroidxu4.dtb fat 0 1;" \
54 "exynos5422-odroidhc1.dtb fat 0 1;" \
58 #define CONFIG_DFU_ALT_BOOT_EMMC \
59 "u-boot raw 0x3e 0x800 mmcpart 1;" \
60 "bl1 raw 0x0 0x1e mmcpart 1;" \
61 "bl2 raw 0x1e 0x1d mmcpart 1;" \
62 "tzsw raw 0x83e 0x200 mmcpart 1;" \
63 "params.bin raw 0x1880 0x20\0"
65 #define CONFIG_DFU_ALT_BOOT_SD \
66 "u-boot raw 0x3f 0x800;" \
68 "bl2 raw 0x1f 0x1d;" \
69 "tzsw raw 0x83f 0x200;" \
70 "params.bin raw 0x1880 0x20\0"
72 /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
73 #define CONFIG_MISC_COMMON
74 #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
76 /* Set soc_rev, soc_id, board_rev, board_name, fdtfile */
77 #define CONFIG_ODROID_REV_AIN 9
80 * Need to override existing one (smdk5420) with odroid so set_board_info will
81 * use proper prefix when creating full board_name (SYS_BOARD + type)
84 /* Define new extra env settings, including DFU settings */
85 #undef CONFIG_EXTRA_ENV_SETTINGS
86 #define CONFIG_EXTRA_ENV_SETTINGS \
87 EXYNOS_DEVICE_SETTINGS \
88 EXYNOS_FDTFILE_SETTING \
89 MEM_LAYOUT_ENV_SETTINGS \
92 "console=console=ttySAC2,115200n8\0" \
93 "fdtfile=exynos5422-odroidxu3.dtb\0" \
94 "board_name=odroidxu3\0" \
99 "dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \
100 "dfu_alt_info=Autoset by THOR/DFU command run.\0"
102 #endif /* __CONFIG_H */