include/configs/odroid.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Samsung Electronics
   4  * Sanghee Kim <sh0130.kim@samsung.com>
   5  * Piotr Wilczek <p.wilczek@samsung.com>
   6  * Przemyslaw Marczak <p.marczak@samsung.com>
   7  *
   8  * Configuation settings for the Odroid-U3 (EXYNOS4412) board.
   9  */
  10
  11 #ifndef __CONFIG_ODROID_U3_H
  12 #define __CONFIG_ODROID_U3_H
  13
  14 #include <configs/exynos4-common.h>
  15
  16 #define CONFIG_SYS_L2CACHE_OFF
  17 #ifndef CONFIG_SYS_L2CACHE_OFF
  18 #define CONFIG_SYS_L2_PL310
  19 #define CONFIG_SYS_PL310_BASE   0x10502000
  20 #endif
  21
  22 #define CONFIG_MACH_TYPE        4289
  23
  24 #define CONFIG_NR_DRAM_BANKS    8
  25 #define CONFIG_SYS_SDRAM_BASE   0x40000000
  26 #define SDRAM_BANK_SIZE         (256 << 20)     /* 256 MB */
  27 #define PHYS_SDRAM_1            CONFIG_SYS_SDRAM_BASE
  28 /* Reserve the last 1 MiB for the secure firmware */
  29 #define CONFIG_SYS_MEM_TOP_HIDE         (1UL << 20UL)
  30 #define CONFIG_TZSW_RESERVED_DRAM_SIZE  CONFIG_SYS_MEM_TOP_HIDE
  31
  32 /* memtest works on */
  33 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  34 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
  35 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
  36
  37 #include <linux/sizes.h>
  38
  39 /* select serial console configuration */
  40 #define CONFIG_SERIAL1
  41
  42 /* Console configuration */
  43
  44 #define CONFIG_BOOTCOMMAND              "run distro_bootcmd ; run autoboot"
  45 #define CONFIG_DEFAULT_CONSOLE          "ttySAC1,115200n8"
  46
  47 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  48                                         - GENERATED_GBL_DATA_SIZE)
  49
  50 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  51
  52 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
  53 #define CONFIG_ENV_SIZE                 SZ_16K
  54 #define CONFIG_ENV_OFFSET               (SZ_1K * 1280) /* 1.25 MiB offset */
  55 #define CONFIG_ENV_OVERWRITE
  56
  57 /* Partitions name */
  58 #define PARTS_BOOT              "boot"
  59 #define PARTS_ROOT              "platform"
  60
  61 #define CONFIG_DFU_ALT \
  62         "uImage fat 0 1;" \
  63         "zImage fat 0 1;" \
  64         "Image.itb fat 0 1;" \
  65         "uInitrd fat 0 1;" \
  66         "exynos4412-odroidu3.dtb fat 0 1;" \
  67         "exynos4412-odroidx2.dtb fat 0 1;" \
  68         ""PARTS_BOOT" part 0 1;" \
  69         ""PARTS_ROOT" part 0 2\0" \
  70
  71 #define CONFIG_SET_DFU_ALT_INFO
  72 #define CONFIG_SET_DFU_ALT_BUF_LEN      (SZ_1K)
  73
  74 #define CONFIG_DFU_ALT_BOOT_EMMC \
  75         "u-boot raw 0x3e 0x800 mmcpart 1;" \
  76         "bl1 raw 0x0 0x1e mmcpart 1;" \
  77         "bl2 raw 0x1e 0x1d mmcpart 1;" \
  78         "tzsw raw 0x83e 0x138 mmcpart 1\0"
  79
  80 #define CONFIG_DFU_ALT_BOOT_SD \
  81         "u-boot raw 0x3f 0x800;" \
  82         "bl1 raw 0x1 0x1e;" \
  83         "bl2 raw 0x1f 0x1d;" \
  84         "tzsw raw 0x83f 0x138\0"
  85
  86 #define BOOT_TARGET_DEVICES(func) \
  87         func(MMC, mmc, 1) \
  88         func(MMC, mmc, 0)
  89
  90 #include <config_distro_bootcmd.h>
  91
  92 /*
  93  * Bootable media layout:
  94  * dev:    SD   eMMC(part boot)
  95  * BL1      1    0
  96  * BL2     31   30
  97  * UBOOT   63   62
  98  * TZSW  2111 2110
  99  * ENV   2560 2560(part user)
 100  *
 101  * MBR Primary partiions:
 102  * Num Name   Size  Offset
 103  * 1.  BOOT:  100MiB 2MiB
 104  * 2.  ROOT:  -
 105 */
 106 #define CONFIG_EXTRA_ENV_SETTINGS \
 107         "loadbootscript=load mmc ${mmcbootdev}:${mmcbootpart} ${scriptaddr} " \
 108                 "boot.scr\0" \
 109         "loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kernel_addr_r} " \
 110                 "${kernelname}\0" \
 111         "loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${ramdisk_addr_r} " \
 112                 "${initrdname}\0" \
 113         "loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdt_addr_r} " \
 114                 "${fdtfile}\0" \
 115         "check_ramdisk=" \
 116                 "if run loadinitrd; then " \
 117                         "setenv initrd_addr ${ramdisk_addr_r};" \
 118                 "else " \
 119                         "setenv initrd_addr -;" \
 120                 "fi;\0" \
 121         "check_dtb=" \
 122                 "if run loaddtb; then " \
 123                         "setenv fdt_addr ${fdt_addr_r};" \
 124                 "else " \
 125                         "setenv fdt_addr;" \
 126                 "fi;\0" \
 127         "kernel_args=" \
 128                 "setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart}" \
 129                 " rootwait ${console} ${opts}\0" \
 130         "boot_script=" \
 131                 "run loadbootscript;" \
 132                 "source ${scriptaddr}\0" \
 133         "boot_fit=" \
 134                 "setenv kernelname Image.itb;" \
 135                 "run loadkernel;" \
 136                 "run kernel_args;" \
 137                 "bootm ${kernel_addr_r}#${boardname}\0" \
 138         "boot_uimg=" \
 139                 "setenv kernelname uImage;" \
 140                 "run check_dtb;" \
 141                 "run check_ramdisk;" \
 142                 "run loadkernel;" \
 143                 "run kernel_args;" \
 144                 "bootm ${kernel_addr_r} ${initrd_addr} ${fdt_addr};\0" \
 145         "boot_zimg=" \
 146                 "setenv kernelname zImage;" \
 147                 "run check_dtb;" \
 148                 "run check_ramdisk;" \
 149                 "run loadkernel;" \
 150                 "run kernel_args;" \
 151                 "bootz ${kernel_addr_r} ${initrd_addr} ${fdt_addr};\0" \
 152         "autoboot=" \
 153                 "if test -e mmc 0 boot.scr; then; " \
 154                         "run boot_script; " \
 155                 "elif test -e mmc 0 Image.itb; then; " \
 156                         "run boot_fit;" \
 157                 "elif test -e mmc 0 zImage; then; " \
 158                         "run boot_zimg;" \
 159                 "elif test -e mmc 0 uImage; then; " \
 160                         "run boot_uimg;" \
 161                 "fi;\0" \
 162         "console=" CONFIG_DEFAULT_CONSOLE "\0" \
 163         "mmcbootdev=0\0" \
 164         "mmcbootpart=1\0" \
 165         "mmcrootdev=0\0" \
 166         "mmcrootpart=2\0" \
 167         "dfu_alt_system="CONFIG_DFU_ALT \
 168         "dfu_alt_info=Please reset the board\0" \
 169         "consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
 170         "consoleoff=set console console=ram; save; reset\0" \
 171         "initrdname=uInitrd\0" \
 172         "ramdisk_addr_r=0x42000000\0" \
 173         "scriptaddr=0x42000000\0" \
 174         "fdt_addr_r=0x40800000\0" \
 175         "kernel_addr_r=0x41000000\0" \
 176         BOOTENV
 177
 178 /* GPT */
 179
 180 /* Security subsystem - enable hw_rand() */
 181 #define CONFIG_EXYNOS_ACE_SHA
 182
 183 /* USB */
 184 #define CONFIG_USB_EHCI_EXYNOS
 185
 186 /*
 187  * Supported Odroid boards: X3, U3
 188  * TODO: Add Odroid X support
 189  */
 190 #define CONFIG_MISC_COMMON
 191 #define CONFIG_BOARD_TYPES
 192 #define CONFIG_MISC_INIT_R
 193
 194 #undef CONFIG_REVISION_TAG
 195
 196 #endif  /* __CONFIG_H */