Merge branch 'master' of git://git.denx.de/u-boot-samsung
[platform/kernel/u-boot.git] / include / configs / odroid.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2014 Samsung Electronics
4  * Sanghee Kim <sh0130.kim@samsung.com>
5  * Piotr Wilczek <p.wilczek@samsung.com>
6  * Przemyslaw Marczak <p.marczak@samsung.com>
7  *
8  * Configuation settings for the Odroid-U3 (EXYNOS4412) board.
9  */
10
11 #ifndef __CONFIG_ODROID_U3_H
12 #define __CONFIG_ODROID_U3_H
13
14 #include <configs/exynos4-common.h>
15
16 #define CONFIG_SYS_L2CACHE_OFF
17 #ifndef CONFIG_SYS_L2CACHE_OFF
18 #define CONFIG_SYS_L2_PL310
19 #define CONFIG_SYS_PL310_BASE   0x10502000
20 #endif
21
22 #define CONFIG_MACH_TYPE        4289
23
24 #define CONFIG_SYS_SDRAM_BASE   0x40000000
25 #define SDRAM_BANK_SIZE         (256 << 20)     /* 256 MB */
26 #define PHYS_SDRAM_1            CONFIG_SYS_SDRAM_BASE
27 /* Reserve the last 1 MiB for the secure firmware */
28 #define CONFIG_SYS_MEM_TOP_HIDE         (1UL << 20UL)
29 #define CONFIG_TZSW_RESERVED_DRAM_SIZE  CONFIG_SYS_MEM_TOP_HIDE
30
31 /* memtest works on */
32 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
33 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
34 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
35
36 #include <linux/sizes.h>
37
38 /* select serial console configuration */
39
40 /* Console configuration */
41
42 #define CONFIG_BOOTCOMMAND              "run distro_bootcmd ; run autoboot"
43 #define CONFIG_DEFAULT_CONSOLE          "console=ttySAC1,115200n8\0"
44
45 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
46                                         - GENERATED_GBL_DATA_SIZE)
47
48 #define CONFIG_SYS_MONITOR_BASE 0x00000000
49
50 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
51 #define CONFIG_ENV_SIZE                 SZ_16K
52 #define CONFIG_ENV_OFFSET               (SZ_1K * 1280) /* 1.25 MiB offset */
53 #define CONFIG_ENV_OVERWRITE
54
55 /* Partitions name */
56 #define PARTS_BOOT              "boot"
57 #define PARTS_ROOT              "platform"
58
59 #define CONFIG_DFU_ALT \
60         "uImage fat 0 1;" \
61         "zImage fat 0 1;" \
62         "Image.itb fat 0 1;" \
63         "uInitrd fat 0 1;" \
64         "exynos4412-odroidu3.dtb fat 0 1;" \
65         "exynos4412-odroidx2.dtb fat 0 1;" \
66         ""PARTS_BOOT" part 0 1;" \
67         ""PARTS_ROOT" part 0 2\0" \
68
69 #define CONFIG_SET_DFU_ALT_INFO
70 #define CONFIG_SET_DFU_ALT_BUF_LEN      (SZ_1K)
71
72 #define CONFIG_DFU_ALT_BOOT_EMMC \
73         "u-boot raw 0x3e 0x800 mmcpart 1;" \
74         "bl1 raw 0x0 0x1e mmcpart 1;" \
75         "bl2 raw 0x1e 0x1d mmcpart 1;" \
76         "tzsw raw 0x83e 0x138 mmcpart 1\0"
77
78 #define CONFIG_DFU_ALT_BOOT_SD \
79         "u-boot raw 0x3f 0x800;" \
80         "bl1 raw 0x1 0x1e;" \
81         "bl2 raw 0x1f 0x1d;" \
82         "tzsw raw 0x83f 0x138\0"
83
84 #define BOOT_TARGET_DEVICES(func) \
85         func(MMC, mmc, 1) \
86         func(MMC, mmc, 0)
87
88 #include <config_distro_bootcmd.h>
89
90 /*
91  * Bootable media layout:
92  * dev:    SD   eMMC(part boot)
93  * BL1      1    0
94  * BL2     31   30
95  * UBOOT   63   62
96  * TZSW  2111 2110
97  * ENV   2560 2560(part user)
98  *
99  * MBR Primary partiions:
100  * Num Name   Size  Offset
101  * 1.  BOOT:  100MiB 2MiB
102  * 2.  ROOT:  -
103 */
104 #define CONFIG_EXTRA_ENV_SETTINGS \
105         "loadbootscript=load mmc ${mmcbootdev}:${mmcbootpart} ${scriptaddr} " \
106                 "boot.scr\0" \
107         "loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kernel_addr_r} " \
108                 "${kernelname}\0" \
109         "loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${ramdisk_addr_r} " \
110                 "${initrdname}\0" \
111         "loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdt_addr_r} " \
112                 "${fdtfile}\0" \
113         "check_ramdisk=" \
114                 "if run loadinitrd; then " \
115                         "setenv initrd_addr ${ramdisk_addr_r};" \
116                 "else " \
117                         "setenv initrd_addr -;" \
118                 "fi;\0" \
119         "check_dtb=" \
120                 "if run loaddtb; then " \
121                         "setenv fdt_addr ${fdt_addr_r};" \
122                 "else " \
123                         "setenv fdt_addr;" \
124                 "fi;\0" \
125         "kernel_args=" \
126                 "setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart}" \
127                 " rootwait ${console} ${opts}\0" \
128         "boot_script=" \
129                 "run loadbootscript;" \
130                 "source ${scriptaddr}\0" \
131         "boot_fit=" \
132                 "setenv kernelname Image.itb;" \
133                 "run loadkernel;" \
134                 "run kernel_args;" \
135                 "bootm ${kernel_addr_r}#${boardname}\0" \
136         "boot_uimg=" \
137                 "setenv kernelname uImage;" \
138                 "run check_dtb;" \
139                 "run check_ramdisk;" \
140                 "run loadkernel;" \
141                 "run kernel_args;" \
142                 "bootm ${kernel_addr_r} ${initrd_addr} ${fdt_addr};\0" \
143         "boot_zimg=" \
144                 "setenv kernelname zImage;" \
145                 "run check_dtb;" \
146                 "run check_ramdisk;" \
147                 "run loadkernel;" \
148                 "run kernel_args;" \
149                 "bootz ${kernel_addr_r} ${initrd_addr} ${fdt_addr};\0" \
150         "autoboot=" \
151                 "if test -e mmc 0 boot.scr; then; " \
152                         "run boot_script; " \
153                 "elif test -e mmc 0 Image.itb; then; " \
154                         "run boot_fit;" \
155                 "elif test -e mmc 0 zImage; then; " \
156                         "run boot_zimg;" \
157                 "elif test -e mmc 0 uImage; then; " \
158                         "run boot_uimg;" \
159                 "fi;\0" \
160         "console=" CONFIG_DEFAULT_CONSOLE \
161         "mmcbootdev=0\0" \
162         "mmcbootpart=1\0" \
163         "mmcrootdev=0\0" \
164         "mmcrootpart=2\0" \
165         "dfu_alt_system="CONFIG_DFU_ALT \
166         "dfu_alt_info=Please reset the board\0" \
167         "consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
168         "consoleoff=set console console=ram; save; reset\0" \
169         "initrdname=uInitrd\0" \
170         "ramdisk_addr_r=0x42000000\0" \
171         "scriptaddr=0x42000000\0" \
172         "fdt_addr_r=0x40800000\0" \
173         "kernel_addr_r=0x41000000\0" \
174         BOOTENV
175
176 /* GPT */
177
178 /* Security subsystem - enable hw_rand() */
179 #define CONFIG_EXYNOS_ACE_SHA
180
181 /* USB */
182 #define CONFIG_USB_EHCI_EXYNOS
183
184 /*
185  * Supported Odroid boards: X3, U3
186  * TODO: Add Odroid X support
187  */
188 #define CONFIG_MISC_COMMON
189 #define CONFIG_BOARD_TYPES
190
191 #undef CONFIG_REVISION_TAG
192
193 #endif  /* __CONFIG_H */