configs: Migrate CONFIG_SYS_TEXT_BASE
[platform/kernel/u-boot.git] / include / configs / odroid.h
1 /*
2  * Copyright (C) 2014 Samsung Electronics
3  * Sanghee Kim <sh0130.kim@samsung.com>
4  * Piotr Wilczek <p.wilczek@samsung.com>
5  * Przemyslaw Marczak <p.marczak@samsung.com>
6  *
7  * Configuation settings for the Odroid-U3 (EXYNOS4412) board.
8  *
9  * SPDX-License-Identifier:     GPL-2.0+
10  */
11
12 #ifndef __CONFIG_ODROID_U3_H
13 #define __CONFIG_ODROID_U3_H
14
15 #include <configs/exynos4-common.h>
16
17 #define CONFIG_SYS_L2CACHE_OFF
18 #ifndef CONFIG_SYS_L2CACHE_OFF
19 #define CONFIG_SYS_L2_PL310
20 #define CONFIG_SYS_PL310_BASE   0x10502000
21 #endif
22
23 #define CONFIG_MACH_TYPE        4289
24
25 #define CONFIG_NR_DRAM_BANKS    8
26 #define CONFIG_SYS_SDRAM_BASE   0x40000000
27 #define SDRAM_BANK_SIZE         (256 << 20)     /* 256 MB */
28 #define PHYS_SDRAM_1            CONFIG_SYS_SDRAM_BASE
29 /* Reserve the last 1 MiB for the secure firmware */
30 #define CONFIG_SYS_MEM_TOP_HIDE         (1UL << 20UL)
31 #define CONFIG_TZSW_RESERVED_DRAM_SIZE  CONFIG_SYS_MEM_TOP_HIDE
32
33 /* memtest works on */
34 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
35 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
36 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
37
38 #include <linux/sizes.h>
39
40 /* select serial console configuration */
41 #define CONFIG_SERIAL1
42
43 /* Console configuration */
44
45 #define CONFIG_BOOTCOMMAND              "run autoboot"
46 #define CONFIG_DEFAULT_CONSOLE          "ttySAC1,115200n8"
47
48 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
49                                         - GENERATED_GBL_DATA_SIZE)
50
51 #define CONFIG_SYS_MONITOR_BASE 0x00000000
52
53 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
54 #define CONFIG_ENV_SIZE                 4096
55 #define CONFIG_ENV_OFFSET               (SZ_1K * 1280) /* 1.25 MiB offset */
56 #define CONFIG_ENV_OVERWRITE
57
58 /* Partitions name */
59 #define PARTS_BOOT              "boot"
60 #define PARTS_ROOT              "platform"
61
62 #define CONFIG_DFU_ALT \
63         "uImage fat 0 1;" \
64         "zImage fat 0 1;" \
65         "Image.itb fat 0 1;" \
66         "uInitrd fat 0 1;" \
67         "exynos4412-odroidu3.dtb fat 0 1;" \
68         "exynos4412-odroidx2.dtb fat 0 1;" \
69         ""PARTS_BOOT" part 0 1;" \
70         ""PARTS_ROOT" part 0 2\0" \
71
72 #define CONFIG_SET_DFU_ALT_INFO
73 #define CONFIG_SET_DFU_ALT_BUF_LEN      (SZ_1K)
74
75 #define CONFIG_DFU_ALT_BOOT_EMMC \
76         "u-boot raw 0x3e 0x800 mmcpart 1;" \
77         "bl1 raw 0x0 0x1e mmcpart 1;" \
78         "bl2 raw 0x1e 0x1d mmcpart 1;" \
79         "tzsw raw 0x83e 0x138 mmcpart 1\0"
80
81 #define CONFIG_DFU_ALT_BOOT_SD \
82         "u-boot raw 0x3f 0x800;" \
83         "bl1 raw 0x1 0x1e;" \
84         "bl2 raw 0x1f 0x1d;" \
85         "tzsw raw 0x83f 0x138\0"
86
87 /*
88  * Bootable media layout:
89  * dev:    SD   eMMC(part boot)
90  * BL1      1    0
91  * BL2     31   30
92  * UBOOT   63   62
93  * TZSW  2111 2110
94  * ENV   2560 2560(part user)
95  *
96  * MBR Primary partiions:
97  * Num Name   Size  Offset
98  * 1.  BOOT:  100MiB 2MiB
99  * 2.  ROOT:  -
100 */
101 #define CONFIG_EXTRA_ENV_SETTINGS \
102         "loadbootscript=load mmc ${mmcbootdev}:${mmcbootpart} ${scriptaddr} " \
103                 "boot.scr\0" \
104         "loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \
105                 "${kernelname}\0" \
106         "loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \
107                 "${initrdname}\0" \
108         "loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \
109                 "${fdtfile}\0" \
110         "check_ramdisk=" \
111                 "if run loadinitrd; then " \
112                         "setenv initrd_addr ${initrdaddr};" \
113                 "else " \
114                         "setenv initrd_addr -;" \
115                 "fi;\0" \
116         "check_dtb=" \
117                 "if run loaddtb; then " \
118                         "setenv fdt_addr ${fdtaddr};" \
119                 "else " \
120                         "setenv fdt_addr;" \
121                 "fi;\0" \
122         "kernel_args=" \
123                 "setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart}" \
124                 " rootwait ${console} ${opts}\0" \
125         "boot_script=" \
126                 "run loadbootscript;" \
127                 "source ${scriptaddr}\0" \
128         "boot_fit=" \
129                 "setenv kerneladdr 0x42000000;" \
130                 "setenv kernelname Image.itb;" \
131                 "run loadkernel;" \
132                 "run kernel_args;" \
133                 "bootm ${kerneladdr}#${boardname}\0" \
134         "boot_uimg=" \
135                 "setenv kerneladdr 0x40007FC0;" \
136                 "setenv kernelname uImage;" \
137                 "run check_dtb;" \
138                 "run check_ramdisk;" \
139                 "run loadkernel;" \
140                 "run kernel_args;" \
141                 "bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
142         "boot_zimg=" \
143                 "setenv kerneladdr 0x40007FC0;" \
144                 "setenv kernelname zImage;" \
145                 "run check_dtb;" \
146                 "run check_ramdisk;" \
147                 "run loadkernel;" \
148                 "run kernel_args;" \
149                 "bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \
150         "autoboot=" \
151                 "if test -e mmc 0 boot.scr; then; " \
152                         "run boot_script; " \
153                 "elif test -e mmc 0 Image.itb; then; " \
154                         "run boot_fit;" \
155                 "elif test -e mmc 0 zImage; then; " \
156                         "run boot_zimg;" \
157                 "elif test -e mmc 0 uImage; then; " \
158                         "run boot_uimg;" \
159                 "fi;\0" \
160         "console=" CONFIG_DEFAULT_CONSOLE "\0" \
161         "mmcbootdev=0\0" \
162         "mmcbootpart=1\0" \
163         "mmcrootdev=0\0" \
164         "mmcrootpart=2\0" \
165         "bootdelay=0\0" \
166         "dfu_alt_system="CONFIG_DFU_ALT \
167         "dfu_alt_info=Please reset the board\0" \
168         "consoleon=set console console=ttySAC1,115200n8; save; reset\0" \
169         "consoleoff=set console console=ram; save; reset\0" \
170         "initrdname=uInitrd\0" \
171         "initrdaddr=42000000\0" \
172         "scriptaddr=0x42000000\0" \
173         "fdtaddr=40800000\0"
174
175 /* GPT */
176
177 /* Security subsystem - enable hw_rand() */
178 #define CONFIG_EXYNOS_ACE_SHA
179
180 /* USB */
181 #define CONFIG_USB_EHCI_EXYNOS
182
183 /*
184  * Supported Odroid boards: X3, U3
185  * TODO: Add Odroid X support
186  */
187 #define CONFIG_MISC_COMMON
188 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
189 #define CONFIG_BOARD_TYPES
190 #define CONFIG_MISC_INIT_R
191
192 #undef CONFIG_REVISION_TAG
193
194 #endif  /* __CONFIG_H */