include/configs/o2mnt.h

   1 /*
   2  * (C) Copyright 2012
   3  * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License as
   7  * published by the Free Software Foundation; either version 2 of
   8  * the License, or (at your option) any later version.
   9  */
  10
  11 /*
  12  * Valid values for CONFIG_SYS_TEXT_BASE are:
  13  * 0xFF000000   boot low boot high (standard configuration)
  14  * 0x00100000   boot from RAM (for testing only)
  15  */
  16 #ifndef CONFIG_SYS_TEXT_BASE
  17 #define CONFIG_SYS_TEXT_BASE    0xff000000      /* Standard: boot low */
  18 #endif
  19
  20 /* Board specific flash config */
  21 #define CONFIG_SYS_FLASH_BASE           0xff000000
  22 #define CONFIG_SYS_FLASH_SIZE           0x01000000      /* maximum 16MB */
  23 /* max number of sectors on one chip */
  24 #define CONFIG_SYS_MAX_FLASH_SECT       128
  25
  26 /*
  27  * Include common defines for all ifm boards
  28  */
  29 #include "o2dnt-common.h"
  30
  31 /* GPIO configuration */
  32 #define CONFIG_SYS_GPS_PORT_CONFIG      0x00002004      /* no CAN */
  33
  34 /* Other board specific configs */
  35 #define CONFIG_NETCONSOLE
  36
  37 #define CONFIG_SYS_BOOTCS_CFG           0x00087801
  38 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
  39
  40 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
  41 #define CONFIG_SYS_MEMTEST_END          0x03f00000      /* 1 - 63 MB in DRAM  */
  42
  43 #define CONFIG_BOARD_NAME               "o2mnt"
  44 #define CONFIG_BOARD_BOOTCMD            "${newcmd}"
  45 #define CONFIG_BOARD_MEM_LIMIT          xstr(62)
  46 #define BOARD_POST_CRC32_END            xstr(0x01000000)
  47
  48 #ifndef CONFIG_IFM_SENSOR_TYPE
  49 #define CONFIG_IFM_SENSOR_TYPE          "O2M110"
  50 #endif
  51
  52 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  53         CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
  54         CONFIG_IFM_DEFAULT_ENV_OLD                                      \
  55         CONFIG_IFM_DEFAULT_ENV_NEW                                      \
  56         "linbot=ff060000\0"                                             \
  57         "lintop=ff25ffff\0"                                             \
  58         "rambot=ff260000\0"                                             \
  59         "ramtop=ffc5ffff\0"                                             \
  60         "jffbot=ffc60000\0"                                             \
  61         "jfftop=ffffffff\0"                                             \
  62         "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"                      \
  63         "ubotop=ff03ffff\0"                                             \
  64         "kernel_addr=0xff060000\0"                                      \
  65         "ramdisk_addr=0xff260000\0"                                     \
  66         "newcmd=run scrprot;run flash_ext2\0"                           \
  67         "scrprot=protect on ${linbot} ${lintop};protect on ${rambot} "  \
  68                 "${ramtop}\0"                                           \
  69         "flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0"   \
  70         "ext2args=setenv bootargs root=/dev/mtdblock3 ro "              \
  71                 "rootfstype=ext2\0"                                     \
  72         "pwm=mw f0000674 0x10006;mw f0000678 0x30000;"                  \
  73                 "mw f0000678 0x30001;mw f0000670 0x3\0"                 \
  74         "master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);"           \
  75                 "mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0"       \
  76         "sensortyp="CONFIG_IFM_SENSOR_TYPE"\0"                          \
  77         "srelease=0.00\0"