include/configs/o2d300.h

   1 /*
   2  * (C) Copyright 2012
   3  * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * Valid values for CONFIG_SYS_TEXT_BASE are:
  10  * 0xFC000000   boot low boot high (standard configuration)
  11  * 0x00100000   boot from RAM (for testing only)
  12  */
  13 #ifndef CONFIG_SYS_TEXT_BASE
  14 #define CONFIG_SYS_TEXT_BASE    0xfc000000      /* Standard: boot low */
  15 #endif
  16
  17 /* Board specific flash config */
  18 #define CONFIG_SYS_FLASH_BASE           0xfc000000
  19 #define CONFIG_SYS_FLASH_SIZE           0x04000000      /* maximum 64MB */
  20 /* max number of sectors on one chip */
  21 #define CONFIG_SYS_MAX_FLASH_SECT       512
  22
  23 /*
  24  * Include common defines for all ifm boards
  25  */
  26 #include "o2dnt-common.h"
  27
  28 /*
  29  * GPIO configuration:
  30  * CS1 SDRAM activate + no CAN + no PCI
  31  */
  32 #define CONFIG_SYS_GPS_PORT_CONFIG      0x8000A004
  33
  34 /* Other board specific configs */
  35 #define CONFIG_SYS_BOOTCS_CFG           0x00057d01
  36 #define CONFIG_SYS_RESET_ADDRESS        0xfc000000
  37
  38 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
  39 #define CONFIG_SYS_MEMTEST_END          0x07f00000      /* 1 - 127 MB in DRAM */
  40
  41 /* Use redundant environment */
  42 #define CONFIG_ENV_ADDR_REDUND          (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
  43 #define CONFIG_ENV_SIZE_REDUND          (CONFIG_ENV_SIZE)
  44
  45 #define CONFIG_BOARD_NAME               "o2d300"
  46 #define CONFIG_BOARD_BOOTCMD            "run dhcp_boot"
  47 #define CONFIG_BOARD_MEM_LIMIT          xstr(126)
  48 #define BOARD_POST_CRC32_END            xstr(0x02000000)
  49
  50 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  51         CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
  52         CONFIG_IFM_DEFAULT_ENV_OLD                                      \
  53         CONFIG_IFM_DEFAULT_ENV_NEW                                      \
  54         "autoload=no\0"                                                 \
  55         "dhcp_boot=run dhcpcmd;run flash_mtd\0"                         \
  56         "flash_mtd=run mtd_args addip addmem;"                          \
  57                 "bootm ${kernel_addr}\0"                                \
  58         "mtd_args=setenv bootargs root=/dev/mtdblock4 "                 \
  59                 "rw rootfstype=cramfs\0"                                \
  60         "linbot=fc080000\0"                                             \
  61         "lintop=fc17ffff\0"                                             \
  62         "rambot=fc180000\0"                                             \
  63         "ramtop=fc57ffff\0"                                             \
  64         "jffbot=fc580000\0"                                             \
  65         "jfftop=fd39ffff\0"                                             \
  66         "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"                      \
  67         "ubotop=fc03ffff\0"                                             \
  68         "halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0"      \
  69         "halbot=fd3a0000\0"                                             \
  70         "haltop=fdf9ffff\0"                                             \
  71         "progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};"     \
  72                 "cp.b ${fileaddr} ${halbot} ${filesize}\0"              \
  73         "kernel_addr=0xfc060000\0"                                      \
  74         "ramdisk_addr=0xfc160000\0"                                     \
  75         "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};"           \
  76                 "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"               \
  77         "netretry=once\0"                                               \
  78         "protcmd=protect on ${linbot} ${lintop};"                       \
  79                 "protect on ${rambot} ${ramtop}\0"                      \
  80         "o2derror=def_env\0"                                            \
  81         "sensorType=O2D300AA\0"